Sim-Lab WS-PRO User manual

WS-PRO Wheel Stand
INSTRUCTION MANUAL
Copyright© 2021 - Sim-Lab Products | Revision 1.0
inf[email protected]
SKU: SLC010 SLC011 SLC012
https://sim-lab.eu/shop/product/ws-pro-wheel-stand-1118

Thank you for purchasing a WS-Pro Wheel stand! On the following
pages you will find a detailed instruction how to build this cockpit.
Assembling requires a set of simple tools, and general knowledge
of how to use them and a bit of technical insight.
Generally it takes about 2-3 hours to build this cockpit. Before
starting please check contents (page 10) and make sure all the
parts are accounted for in the packages.
5/6 mm
Required tools:
2
WS-PRO wheel stand
Seat support

Left upright frame assembly
3
A3
A1
B8 B3 B9
B4
B6
B8
B9
A2

Right upright frame assembly
4
2

5
Horizontal profiles assembly
3a
Rubber feet assembly
3b
B5
B8
B9
A2
2x
2x
B12
B7
B10

6
Pedal deck assembly
4a
Wheel deck assembly
4b
B2
B9
B8
B1
B8
B9
B11

7
Seat support frame assembly
5a
Seat support frame assembly
5b
C4
C2
D3
C1
D1
D5
D6
D2
D5
D6
2x
2x
4x
4x

8
B11
B14
Seat support frame assembly
5c
Seat support rubber feet assembly
5d
C3
D2
D5
D6
2x
2x
D8
D7
D4

9
Seat support frame assembly
5e
Seat support to wheel stand assembly
6
D1
D5
D6
2x
2x
D5
D6
2x
2x

Parts list
10
BOX A
Profile kit - WS-PRO wheel stand
Part No. Part name QTY UoM Note
A1 Profile 40mm slot 8 (Black, 40x40L3N) - 450mm 2 Units
A2 Profile 40mm slot 8 (Black, 40x40L3N) - 500mm 4 Units
A3 Profile 40mm slot 8 (Black, 40x40L3N) - 850mm - Engraved 2 Units
BOX B
Hardware kit - WS-PRO wheel stand
Part No. Part name QTY UoM Note
B1 Wheel deck bracket 1 Units
B2 Pedal deck bracket 1 Units
B3 Upright sandwich plate 2 Units
B4 Base sandwich plate 4 Units
B5 Corner bracket 4040F + Cover cap 4 Units
B6 End cap profile (40x40L) 12 Units
B7 Slot 8 nut (M6) 4 Units
B8 Slot 8 nut (M8) 32 Units
B9 Bolt - DIN 912 (Black steel, 16mm, M8) 32 Units
B10 Bolt - DIN 912 (Black steel, 16mm, M6) 4 Units
B11 Washer (Black steel, M8, Plain black) 4 Units
B12 Wheelstand Rubber feet 4 Units
BOX C
Profile kit - WS-PRO seat support
Part No. Part name QTY UoM Note
C1 Profile 40mm slot 8 (Black, 40x40L3N) - 150mm 2 Units
C2 Profile 40mm slot 8 (Black, 40x40L3N) - 500mm 2 Units
C3 Profile 40mm slot 8 (Black, 40x40L3N) - 500mm - Engraved 1 Units
C4 Profile 40mm slot 8 (Black, 40x40L3N) - 750mm - Engraved 2 Units
Hardware kit - WS-PRO seat support
Part No. Part name QTY UoM Note
D1 Seat addon angled plate 4 Units
D2 Corner Bracket 4040F + Cover cap 6 Units
D3 End cap profile (40x40L) 8 Units
D4 Slot 8 nut (M6) 2 Units
D5 Slot 8 nut (M8) 30 Units
D6 Bolt - DIN 912 (Black steel, 16mm, M8) 30 Units
D7 Bolt - DIN 912 (Black steel, 16mm, M6) 2 Units
D8 Wheelstand Rubber feet 2 Units