Simpli Home AXWELL3-005-60 User manual

1/20
60 INCH TV MEDIA STAND
MODEL AXWELL3-005-60#
ACADIAN / NORMANDY / BRUNSWICK

2/20
DO NOT RETURN
FOR REPLACEMENT PARTS OR OTHER INQUIRIES
PLEASE CONTACT US AT:
PLEASE ENSURE TO HAVE THE
INSTRUCTION BOOKLET
simpli-home.com/customer-support
MODEL #
FROM THE PACKAGING OR

3/20
IMPORTANT :
.
Please read this manual carefully before beginning
assembly of this product Keep this manual for future reference.
SAFETY INFORMATION
CARE and MAINTENANCE
Identify all the parts and hardware. Do not discard of the packaging until you
have checked that you have all of the parts and hardware required. Hardware
package may have spare parts.
WARNING: This item contains small parts which can be swallowed by children
and pets. Keep children and pets away during assembly. To avoid danger of
suffocation, always keep plastic bags away from children and pets.
We recommend that you assemble this unit on a carpeted floor to avoid
scratches. We do not recommend the use of power tools for assembly as this
could damage the unit. Only use manual tools.
May require 2 people for ease of assembly.
To clean, use a soft or slightly damp cloth, then wipe with a clean, dry cloth.
Dust with soft dry cloth.
Do not use ammonia-based cleaning products, as they will damage the finish.
Do not leave liquids or damp cloths on this furniture.
To avoid dulling of the finish, do not place furniture in direct sunlight.
Please inspect and tighten all screws or bolts on a regular basis to ensure proper
performance and safety of your item.

A
TOP
QTY 1
SIDES
QTY 1 PAIR
DIVIDER
QTY 1 PAIR
SMALL SHELF
QTY 2
DOORS
QTY 1 PAIR
B C
D E
4/20
QTY 2 PAIRS
DRAWER SIDE DRAWER
QTY 2
BACK
M N
LARGE SHELF
QTY 1
F
BOTTOM SHELF
QTY 1
CENTRE SHELF
QTY 1
G H
SMALL DIVIDER
QTY 1
J K
BOTTOM SUPPORT LEG
QTY 1
DRAWER FRONT
QTY 1 PAIR
BACK PANEL
QTY 1 SET
DRAWER BOTTOM
QTY 2
O
I
L
PARTS DESCRIPTION
PRE-ASSEMBLY INFORMATION MODEL # AXWELL3-005-60
NEED HELP? For help with assembly or if you are missing a part,
Please call customer service at 1-866-518-0120 ext. 262 (9 am to 5 pm EST)
Front Side
Front
Side
Back
Side
Front
Side
Back
Side
Front Side
Front Side

1
ALLEN KEY SCREW
M6 X 30 mm
QTY 29
32
CAM LOCK PIN
CAM LOCK
QTY 23
WOOD DOWEL
8 X 30 mm
QTY 14
PHILLIPS
SCREW
M3 X 15 mm
QTY 8
MEDIUM
PHILLIPS LONG SCREW
M4 X 30 mm
QTY 4
5/20
8
HANDLE
QTY 4 SETS
MAGNET and PLATE
QTY 2 SETS
PHILLIPS SCREW
ROUND HEAD
M4 X 15 mm
QTY 30
ALLEN KEY
QTY 1
PHILLIPS SHORT
SCREW
M3 X 12 mm
QTY 12
10
911
6 75
SHELF SUPPORT
QTY 18
4
12
TIPPING RESTRAINT
1 SET
a. M4 x 25mm
b. M4 x 15mm
c. M4 x 25mm
PRE-ASSEMBLY INFORMATION
HARDWARE DESCRIPTION
NEED HELP? For help with assembly or if you are missing a part,
Please call customer service at 1-866-518-0120 ext. 262 (9 am to 5 pm EST)
Required -
Flathead screwdriver
Phillips screwdriver
Not Included
MODEL # AXWELL3-005-60

COMPONENTS – KEY DIAGRAM
6/20
MODEL # AXWELL3-005-60

ASSEMBLY
STEP 1
7/20
STEP 2
1. Attach 4 Cam Lock Pins 2 to back of Drawer Front L .
2. Align Cam Lock Pins with pre-drilled holes and attach Drawer Sides M.
3. Insert 2 Cam Locks 2 into pre-drilled holes on each Drawer Side M.
4. Use flathead screwdriver secure Cam Locks.
1. Slide Drawer Bottom O firmly into slots on Drawer Sides M and Drawer Front L .
MODEL # AXWELL3-005-60

ASSEMBLY
STEP 3
8/20
1. Use Phillips Screwdriver to attach Handle 10 to Drawer Front L .
Repeat Step 1-4 for the second drawer.
STEP 4
1. Align Drawer Back N with Drawer Bottom O and press firmly into slot .
2. Attach back using 2 Allen Key Screws 1 through pre-drilled holes on each Side M .
3. Use Allen Key 4 to tighten screws. Do not over-tighten.
NOTE: The screwdriver is not
included in the hardware pack.
MODEL # AXWELL3-005-60

STEP 5
9/20
1. Attach 3 Cam Lock Pins 2 to each Divider C into guide holes.
2. Align and insert Cam Lock Pins on Dividers C into pre-drilled holes on
Centre Shelf F .
3. Place 6 Cam Locks 2 into pre-drilled holes on Centre Shelf F .
4. Use a flathead screwdriver to tighten Cam Locks into Pins.
STEP 6
1. Attach 3 Cam Lock Pins 2 to into guide holes.
2. Align and insert Cam Lock Pins on Centre Shelf F into pre-drilled holes on
Small Divider D .
3. Place 3 Cam Locks 2 into pre-drilled holes on Small Divider D .
4. Use a flathead screwdriver to tighten Cam Locks into Pins.
Centre Shelf F
ASSEMBLY MODEL # AXWELL3-005-60

STEP 7
1. Insert 2 Dowels 3 into pre-drilled holes on each Divider C and Small Divider D .
2. Use rubber mallet to tap Dowels 3 into bottom of holes securely. ½ length of
Dowels should be exposed.
3. Attach Divider C and Small Divider D to Bottom Shelf E using 9
Allen Key Screws 1 through pre- drilled holes.
4. Use Allen Key 4 to tighten screws. Do not over-tighten.
ASSEMBLY MODEL # AXWELL3-005-60
10/20

STEP 8
11/20
1. Insert 2 Dowels 3 into pre-drilled holes on each Side B .
2. Use rubber mallet to tap Dowels 3 into bottom of holes securely. ½ length of
Dowels should be exposed.
3. Attach 3 Cam Lock Pins 2 to each Side B into guide holes.
4. Align and insert Cam Lock Pins on Sides B into pre-drilled holes on Bottom Shelf E .
5. Place 6 Cam Locks 2 into pre-drilled holes on Bottom Shelf E .
6. Use a flathead screwdriver to tighten Cam Locks into Pins.
ASSEMBLY MODEL # AXWELL3-005-60

STEP 9
1. Insert 2 Dowels 3 into top corners of each Side B .
2. Use rubber mallet to tap Dowels 3 into bottom of holes securely. ½ length of
Dowels should be exposed.
3. Align pre-drilled holes bottom corners of Top A with Dowels 3 on Side B .
4. Attach Top A to Sides B and Dividers C using 12 Allen Key Screws 1 .
5. Use Allen Key 4 to tighten screws. Do not over-tighten.
12/20
ASSEMBLY MODEL # AXWELL3-005-60

STEP 10
1. Attach Bottom Support Leg K to Bottom Shelf E using 4 Phillips Screws 9 .
2. Use Phillips screwdriver to tighten screws. Do not over-tighten.
13/20
ASSEMBLY MODEL # AXWELL3-005-60

STEP 11
1. Attach Back Panels J to Back of cabinet using Phillips Screws Round Head 5 into
pre-drilled guide holes.
2. Use Phillips screwdriver to tighten screws. Do not over-tighten.
14/20
ASSEMBLY MODEL # AXWELL3-005-60

STEP 12
1. Attach Hinges on Doors I to Sides B using Phillips Screws 7 into pre-drilled guide holes.
2. Attach Magnet Plates 11 to bottom corner of Doors I using Phillips Screws 8 .
into guide holes on Doors I .
3. Attach Magnet 11 to Bottom Shelf E using Phillips Screws 8 into guide holes on
Bottom Shelf E .
4. Use Phillips screwdriver to attach Handles 10 to Doors I .
15/20
ASSEMBLY MODEL # AXWELL3-005-60

STEP 13
1. Use 4 Shelf Supports 6 for each Shelf G & H in desired location.
2. 2 Shelf Supports 6 may be used on back top of each Shelf G & H as a tipping
restraint.
16/20
ASSEMBLY MODEL # AXWELL3-005-60

STEP 14
17/20
STEPS 14 & 15
1. To attach Tipping Restraint 12 , follow instructions on Tipping Restraint package.
STEP 15
ASSEMBLY MODEL # AXWELL3-005-60

18/20
WARRANTY
Thank you for purchasing a Simpli Home – Wyndenhall – Brooklyn + Max
product. These products have been made to demanding, high-quality standards
and are guaranteed for domestic use against manufacturing faults for a period of
12 months from the date of purchase. This warranty does not affect your
statutory rights.
In case of any malfunction of your product (failure, missing parts, etc.) please
contact us at our toll free service line at 1-866-518-0120 ext. 262 from 9 am to 5
pm, Monday to Friday, Eastern Standard Time or by email at
We reserve the right to repair or replace the defective product, at its discretion.
This product is guaranteed for 12 months if used for normal purposes. Any
warranty is invalid if the product has been overloaded or subject to neglect,
improper use or an attempted repair by other than an authorized agent. Heavy-
duty or daily professional/commercial usage are not guaranteed.
Due to continuous product improvement, we reserve the right to change the
product specifications without prior notice.
PLEASE NOTE: This item is hand-crafted and hand-finished with utmost care.
As such, variations and imperfections should be expected and should be
welcomed as the natural beauty of the wood.
simpli-home.com/customer-support.

Question, problems, missing parts?
Before returning please email Customer Support at
or call
Customer Service at 1-866-518-0120 ext. 262
Monday to Friday between 9 am – 5 pm EST
For more information visit us on our website
Like us on facebook
simpli-home.com/customer-support
www.simpli-home.com
www.facebook.com/simplihomefurnishings
19/20

Upload an image of our furniture in your
home with a short review to our
facebook page and have a chance to
ENTER
TO WIN
Win your choice of any one of
Simpli Home furniture pieces
Free!!!
www.facebook.com/simplihomefurnishings
(draws monthly – shipping included)
(vanities not included)
20/20