Simpli Home brooklyn + max AXCBCACA-03 User manual

1/11
ACADIAN / NORMANDY / BRUNSWICK
SINGLE DOOR WALL CABINET
MODEL # AXCBCACA-03

2/11

3/11

MODEL # AXCBCACA-03
4/11
CABINET TOP
QTY 1
LEFT SIDE PANEL
QTY 1
RIGHT SIDE PANEL
QTY 1
BOTTOM PANEL
QTY 1
SHELF
QTY 1
MIDDLE SHELF
QTY 1
TOP BACK PANEL
QTY 1
DOOR
QTY 1
REAR TOP CROSS BAR
QTY 1
PRE-ASSEMBLY INFORMATION
BOTTOM BACK PANEL
QTY 1
REAR BOTTOM CROSS BAR
QTY 1

6/11
A
KJ
E
H
C
F
BG
D
I
MODEL # AXCBCACA-03
COMPONENTS-KEY DIAGRAM

STEP 1
STEP 2
7/11
B
J
C
F
D
1
4
3
2
11
3
2
A
MODEL # AXCBCACA-03
ASSEMBLY
Assembling the Cabinet Top, Door
1. Lay down the cabinet top (A) and screw four cam bolts (2) into the pre-drilled holes using a Phillips screwdriver.
2. Attach the magnet (8) to the left side panel (B), by inserting two screws (6) through the holes on the magnet (8).
Use a Phillips screwdriver to tighten.
3. Lay down the door (I) and attach two metal hinges (7) to the door by inserting four screws (5) through the holes on
the metal hinge (7) and tighten the door using a Phillips screwdriver.
4. Attach the metal plate (9) to the door (I) by inserting one screw (5) through the holes on the magnet plate (9) and
tighten to the door (I) using a Phillips screwdriver.
Assembling the Left Side Panel, Right Side Panel, Middle Shelf ,
Bottom Panel and Rear Top Cross Bar
1. Lay down the left side panel (B) and screw four cam bolts into pre-drilled using a Phillips screwdriver.
2. Lay down the right side panel (C) and screw four cam bolts into pre-drilled using a Phillips screwdriver.
3. Attach the middle shelf (F), bottom panel (D) and rear top cross bar (J) to the left side panel (B) by inserting
six wood dowels (1) into the dowel holes on the left side panel (B), middle shelf (F), bottom panel (D) and
rear top cross bar (J).
4. Insert two cam locks (4) into the cam lock holes on the middle shelf (F) and insert two cam locks (3) into the
cam lock holes on the bottom panel (D), and rotate clockwise to secure cam bolts are in place using a Phillips
screwdriver.
5. Attach the middle shelf (F), bottom panel (D) and rear top cross bar (J) to the right side panel (C) by inserting
six wood dowels (1) into the dowel holes on the left side panel (B), middle shelf (F), bottom panel (D) and
rear top cross bar (J).
6. Insert two cam locks (4) into the cam lock holes on the middle shelf (F) and insert two cam locks (3) into the cam lock
holes on the bottom panel (D), and rotate clockwise to secure cam bolts are in place using a Phillips screwdriver.
I
7
5
9
5
6
8
B

15
15
3. Cover the cam locks with caps (15) on left side panel (B) and right side panel (C).

STEP 5
STEP 6
9/11
I
C
5
7
12
11
J
K10
13 14
MODEL # AXCBCACA-03
ASSEMBLY
Assembling the Door
1. Attach the door (I) to the right side panel (C) by inserting four screws (5) through the holes on the door hinges
and tighten.
2. Attach the handle(11) to the door (I) and insert one screw (12) through hole on the door and tighten to handle (11)
using a Phillips screwdriver.
Assembling the Rear Bottom Cross Bar and Adjustable Shelf
1. Drill two holes in the wall where marked.
2. Insert two plastic anchors (14) into the holes. Using the two screws (13) to lock rear bottom cross bar (K) on the wall.
3. Hang the assembled cabinet on the rear bottom cross bar (K).
4. Insert four self supports(10) into holes in the cabinet on both side panels (B) and (C) at the same level.
5. Insert the adjustable shelf (E) into the cabinet on the top of the shelf supports.

10/11

11/11