Simpli Home WyndenHall brooklin+max AXCCOS11-MAH User manual

COSMOPOLITAN / CITY / ESSEX
SIDEBOARD BUFFET
MODEL # AXCCOS11-MAH
/241
TM
TM
SI
M P HOME ®
LIFE BY DESIG N

/242
TM
TM
SI
M P
HOME
®
LIFE BY DESIG N
Questions, problems, assembly help, missing parts?
No need to return the product, we will gladly help and ship your
replacement parts free of charge
Please call Customer Service at 1-866-518-0120 ext. 262
Monday to Friday between 9 am –4 pm EST
or go to
www.simpli-home.com/parts request
In order to assist you in a timely manner, please have the following
information ready:
Model # _________________Part Number or Letter_____________________
Purchased at ____________Date of Purchase _________________________
If you wish to return the product, please contact the retailer where the
product was purchased.

/243
IMPORTANT : Please read this manual carefully before beginning
assembly of this product. Keep this manual for future reference.
CAUTION: Injuries and damage can occur from furniture tip over if product is
not properly anchored to the wall. Use the Furniture Anti-Tipping Restraint
provided with the product. Consult our assembly instructions for help.
If the Furniture Anti-Tipping Restraint kit is not in the box, please contact our
customer service department in order to obtain another kit before using the
furniture.
Identify all the parts and hardware. Do not discard of the packaging until you
have checked that you have all of the parts and hardware required.
Hardware package may have spare parts.
WARNING: This item contains small parts which can be swallowed by
children and pets. Keep children and pets away during assembly. To avoid
danger of suffocation, always keep plastic bags away from children and pets.
We recommend that you assemble this unit on a carpeted floor to avoid
scratches. If using power tools, set the tool to low torque to avoid damage.
May require 2 people for ease of assembly.
SAFETY INFORMATION

/244
Perhaps the greatest environmental damage to wood furniture comes from wide swings in
relative humidity (RH) in our homes. Wood absorbs and desorbs water as relative humidity
rises and falls, and in doing so it swells and shrinks. Making matters worse, it expands and
contracts unequally along different grain directions. As humidity changes, the components
of wooden objects are continually pushing and pulling against each other. This pressure
often results in parts of furniture no longer fitting together closely or becoming distorted
or breaking from their own internal stresses.
The response to relative humidity changes begins with determining the annual average RH
for your particular space. Then try to keep the RH in the space where your furniture is as
close to that average as possible, generally within about 10% up or down. De-humidify in
the summer and humidify in the winter.
Be aware that raising the temperature lowers the humidity and vice versa. Thus, modern
heating systems, which can drive down interior RH in the winter, almost invariably cause
problems for furniture. To counteract their effect, you can either modify the RH by keeping
furniture containing spaces cooler in the winter or most importantly, have a good working
humidifier for your home. A humidistat automatically works to balance the humidity in
your home so it is constant. Dry indoor air can suck enough moisture from its surroundings
to do permanent damage to wood, causing it to crack or split.
Remember, that not all woods are created equal. Two factors that help determine how
rapidly a wood will lose moisture are pore size and surface hardness. A piece made from a
dense and hard wood will dry less rapidly than pieces made from softer woods.
Furniture that is sealed and lacquered will lose moisture more slowly than an unfinished
piece while pieces with veneer finishes are not only stronger, but lose moisture more
slowly than other finishes.
To help protect your wood furniture, take these steps:
·Use a humidifier, preferably one with an automatic control system that can sense the
humidity level and adjust itself accordingly. Don't over-humidify; that can damage wood
by causing it to expand and contract.
·Keep furniture out of direct sunlight, which can cause it to dry out, crack and warp.
·If you can avoid it, don't put furniture near heating vents. If you must, keep the piece 3
to 4 inches away from the wall, giving the heat and air space to circulate.
·Dust with soft dry cloth.
·Do not use liquid or aerosol products.
·To avoid marking, do not place rubber on surface (foot pads, etc.)
·For soil build-up, wipe with damp cloth & dry.
·Do not use abrasive cleaners.
CARE and MAINTENANCE
IMPORTANT : Please read this manual carefully before beginning
assembly of this product. Keep this manual for future reference.

PART DESCRIPTION
NEED HELP? For help with assembly or if you are missing a part,
Please call customer service at 1-866-518-0120 ext. 262 (9 am to 4 pm EST)
PRE-ASSEMBLY INFORMATION MODEL # AXCCOS11-MAH
/245
.A.BL .BR
.C.DL .DR
.EL .ER .F
TOP
QTY 1 LEFT SIDE QTY 1 RIGHT SIDE QTY 1
LEFT SHELF
QTY 1 RIGHT SHELF QTY 1 MIDDLE SHELF QTY 1
BOTTOM FRAME
QTY 1 LEFT DIVIDER
QTY 1 RIGHT DIVIDER
QTY 1
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant

PART DESCRIPTION
NEED HELP? For help with assembly or if you are missing a part,
Please call customer service at 1-866-518-0120 ext. 262 (9 am to 4 pm EST)
PRE-ASSEMBLY INFORMATION MODEL # AXCCOS11-MAH
/246
.G.HL .HR
.H.I.J
.KL .KR .L
DOOR
QTY 3 LEFT BACK PANEL
QTY 1 RIGHT BACK PANEL
QTY 1
MIDDLE BACK PANEL
QTY 1 BOTTOM SUPPORT LEG
QTY 1 DRAWER FRONT QTY 3
.M
LEFT DRAWER SIDE
QTY 3 RIGHT DRAWER SIDE QTY 3 DRAWER BACK
QTY 3
DRAWER BOTTOM
QTY 3
Warning
Label

NEED HELP? For help with assembly or if you are missing a part,
Please call customer service at 1-866-518-0120 ext. 262 (9 am to 4 pm EST)
PRE-ASSEMBLY INFORMATION MODEL # AXCCOS11-MAH
/247
HARDWARE DESCRIPTION
Required -
Flathead screwdriver
Phillips screwdriver
Rubber mallet
Not Included
.1.2.3
ALLEN KEY SCREW
M6 X 30mm
QTY 30
CAM LOCK PIN
CAM LOCK
QTY 18 SETS ALLEN KEY
QTY 1
PHILLIPS SCREW ROUND HEAD
M4 X 15mm
QTY 26
SHELF SUPPORT
QTY 18
FURNITURE TIP OVER RESTRAINT
QTY 1 SET
a. M4 X 25mm - QTY 2
( 1 is extra )
b. M4 X 15mm - QTY 1
c. M4 X 25mm - QTY 1
HANDLE
M4 x 25mm
QTY 6
MAGNET AND PLATE
QTY 3 SETS
PHILLIPS SCREW
M3 X 12mm
QTY 18
PHILLIPS SCREW
M3 X 15mm
QTY 12
PHILLIPS SCREW
M4 X 30mm
QTY 4
WOOD DOWEL
Ø8 X 30mm
QTY 12
.4.5.6
.7.8.9
.10 .11 .12

COMPONENTS-KEY DIAGRAM MODEL # AXCCOS11-MAH
/248
J
KL
KR
L
M
I
A
BL
BR
DL DR
G
G
G
HR HHL
C
EL FER
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant

ASSEMBLY MODEL # AXCCOS11-MAH
/249
P
X
2
1. Attach four Cam Lock Pins 2 into pre-drilled holes on Drawer Front J .
2. Use Phillips screwdriver to secure Cam Lock Pins. Do not over-tighten.
STEP-2
2
J
2
1. Align Cam Lock Pins with guide holes and attach Drawer Sides KL ,KR to Drawer Front J .
2. Insert two Cam Locks 2 into guide holes on each Drawer Side KL , KR .
3. Use Phillips screwdriver to secure Cam Locks. Do not over-tighten.
2
J
KR
KL
J
KR
KL
STEP-1
2
2

ASSEMBLY MODEL # AXCCOS11-MAH
/2410
STEP-3
STEP-4
1. Slide Drawer Bottom M firmly into slots on Drawer Sides KL , KR and Drawer Front J .
2. Align Drawer Back L with Drawer Bottom M and press firmly into slot .
3. Attach Drawer Back using two Allen Key Screws 1 through guide holes on
each Drawer Side KL , KR . UsePhillips screwdriver to tighten Screws.
J
KR
KL
M
J
M
KR
KL
L
4
J
J
1. Use Phillips screwdriver to attach Handle 4 to Drawer Front J .
2. Repeat Step 1-4 for the other drawers.
1
3

ASSEMBLY MODEL # AXCCOS11-MAH
/2411
STEP-5
P
X
2
BL
BR
2
2
1111
11
1. Attach three Cam Lock Pins 2 into pre-drilled holes on each Side BL , BR .
2. Use Phillips screwdriver to secure Cam Lock Pins. Do not over-tighten.
3. Insert two Wood Dowels 11 into guide holes on each each Side BL , BR .
4. Use rubber mallet to tap Dowels 11 into bottom of holes securely. 1/2 length of
Dowels should be exposed.
Front /
Avant
Front /
Avant

ASSEMBLY MODEL # AXCCOS11-MAH
/2412
STEP-6
1. Insert four Wood Dowels 11 into guide holes on Bottom Frame C .
2. Insert two Wood Dowels 11 into guide holes on each Divider DL , DR .
3. Use rubber mallet to tap Dowels 6 into bottom of holes securely. 1/2 length of
Dowels should be exposed.
DR
DL
C
11
Front /
Avant
Front /
Avant
Front /
Avant
11
11
11
11

ASSEMBLY MODEL # AXCCOS11-MAH
/2413
1. Align Wood Dowels with guide holes and attach Bottom Frame C
to Divider DL , DR .
2. Use three Allen Key Screws 1 to attach Bottom Frame C through guide holes
from Bottom Frame C to pre-drilled holes of each Divider DL , DR .
3. Use Allen Key 3 to tighten Screws. Do not over-tighten.
C
C
DL
DR
DL
DR
1
3
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
STEP-7

ASSEMBLY MODEL # AXCCOS11-MAH
/2414
1. Align Cam Lock Pins and Wood Dowels with guide holes
and attach Sides BL , BR to Bottom Frame C .
2. Insert six Cam Locks 2 into guide holes on Bottom Frame C .
3. Use Phillips screwdriver to secure Cam Locks. Do not over-tighten.
2
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
C
C
DL
DR
BR
BL
BL
BR
DL
DR
STEP-8

ASSEMBLY MODEL # AXCCOS11-MAH
/2415
2. Use three Allen Screws 1 to attach each parts BL , BR , DL , DR through
guide holes to Top A .
3. Use Allen Key 3 to tighten Screws. Do not over-tighten.
1. Align Wood Dowels with guide holes on Top A and attach Top A .
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
C
C
BL
BL
DL
DR
DL
DR
BR
BR
A
A
1
3
1
3
STEP-9

ASSEMBLY MODEL # AXCCOS11-MAH
/2416
1. Attach Bottom Support Leg I align with pre-drilled holes at back of Bottom
Frame C . Use Phillips Screwdriver to tighten four Phillips Screws 10 .
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
C
I
10
10
BL
DL
DR
BR
A
STEP-10

ASSEMBLY MODEL # AXCCOS11-MAH
/2417
Note:
The back of the cabinet frame does not have
pre-drilled holes to attach the back panels.
1. Use Phillips Screws Round Head 5 to attach Back Panels HL , HR , H through
guide holes to the back of Sideboard.
2. Use Phillips Screwdriver to tighten screws. Do not over-tighten.
Front /
Avant
Front /
Avant
A
A
HR
HR
HL
HL
H
H
5
STEP-11
Warning Label

ASSEMBLY MODEL # AXCCOS11-MAH
/2418
9
4
1. Attach Magnets 7 using Phillips Screws 9 into pre-drilled holes on Bottom Frame C .
2. Use Phillips screwdriver to attach Handles 4 to Doors G through guide hole.
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
A
C
BL
DL
DR
BR
G
7
STEP-12

ASSEMBLY MODEL # AXCCOS11-MAH
/2419
1. Attach hinges on Doors G to parts BL , BR , DR using Phillips Screws 8 into pre-drill holes:
- Using Phillips screwdriver to attach Screws 8 at middle hole of hinges for
both top & bottom hinges.
- Adjust the door to ensure they are aligned straight & square with bottom shelf & side.
- Using Phillips screwdriver to tighten the rest of screws8 into pre-drill holes
( top & bottom holes on hinges).
2. Attach Magnet Plates 7 to bottom corner of Doors G using Phillips Screws 9 into
pre-drilled holes on Doors G .
First Step Last Step ( after adjust the door )
8
8
8
G
G
G
C
A
BL
BR
DR
DL
STEP-13
7
9
G

ASSEMBLY MODEL # AXCCOS11-MAH
/2420
shelf support
anti - tipping
shelf level 1
shelf level 2
shelf level 3
6
6
1. Use four Shelf Supports 6 for each Shelf F , EL , ER in desired location .
2. Two Shelf Supports 6 may be used on back top of each Shelf F , EL , ER as a
tipping restraint.
EL
ER
F
STEP-14