Steelcase Regard Tablet User manual

Regard Tablet Rail Installation
If you have a problem, question, or request, call
your local dealer, or Steelcase Line 1 at
888.STEELCASE(888.783.3522)
for immediate action by people who want to help you.
(Outside the U.S.A., Canada, Mexico, Puerto Rico,
and the U.S. Virgin Islands, call: 1.616.247.2500)
Or visit our website: www.steelcase.com
©2018 Steelcase Inc.
Grand Rapids, MI 49501
U.S.A.
Printed in U.S.A.
®
Page 1 of 5
116537 Rev A
HEALTH
5mm
Product Directions Needed:
Regard Customer Service Trim
Assembly # 9599294
Regard Customer Service Arm
Assembly # 9599294
Surround Tablet Assembly
#1160570001

Page 2 of 5
116537 Rev A
®
HEALTH
1a. Install side trim.
1b.
Lay out components (seats, arms, storage) and
note where mounting brackets will be located
on frame.
1c.
Position the three tablet rail mouting brackets
so there is one bracket at each end of the frame,
and one in the center.
NOTE: See next page for placement guidelines.

Page 3 of 5
116537 Rev A
®
HEALTH
< 24”
< 12”
2. Brackets may interfere with seat, arm,
and/or storage mounting brackets.
Place the end brackets within 24” of the end
of the frame, and the center bracket within 12” of
either side of the center of the frame.
2

Page 4 of 5
116537Rev A
®
HEALTH
3a.
Once brackets are properly placed, tighten
screws using the hex tool as shown
to secure all three brackets to rail.
3c
Make sure t-nuts are aligned with each other
as shown in figure 3a.
3a
3b.Align the tablet rail under the frame, centering
it between the left and right side trim.
3c.

Page 5 of 5
4b.
116537 Rev A
®
HEALTH
4a.
4b.
NOTE: Tablet must be installed prior to this
step. See tablet assembly (#1160570001).
4a.
Slide the tablet to the end of the rail, and rotate it.
If it interferes with anything (nearby wall, cabinet,
etc.), adjust the stops on the bottom of the rail.
4b. Loosen the bolt, slide the nut, and re-tighten.