SAFAVIEH COUTURE Anna SFV4747 User manual

CARE AND MAINTENANCE
NOTICE
HW2 Flat Washer(M8) 12X
BLegs 4X
HW1 Split Lock Washer(M8) 12X
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY
SAFAVIEH
C O U T U R E
HW3 Socket Screws 8*1.25*30MM 12X
HW4 Allen Key 1X
ASeat 1X
Spot clean using a mild water-free solvent. Only a professional cleaner should
undertake a complete overall cleaning.
The use of steam or water-based cleaners may cause excessive shrinking or staining.
* Please make sure that you have all parts indicated before you begin assembly of
this item
* This item should be assembled on a soft surface to prevent scratching the finish
during assembly
* This item may require periodic tightening
SFV4747
Dimensions:19.70"W*19.70"D*16.93"H
Weight Capacity: 275 lbs
WARNING: DO NOT STAND ON OTTOMAN
WARNING: DO NOT OVER TORQUE WASHER/SCREWS
The legs and hardware are located inside the carton.

STEP3 INSERT THE LEGS AND SCREW IN THE SCREWSBUT DON'T
TIGHTEN COMPLETELY.
STEP4
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any partismissing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen key
STEP2 PUT THE WASHERS ON THE SCREW IN THE ORDER SHOWN IN
THE PICTURE
HW2 HW1 HW3
The legs and hardware are located inside the carton.
HW4
HW1
HW2
B
HW3
PUT THE OTTOMAN UPRIGHT AND MAKE SURE ALL LEGS ARE LEVEL,
THEN FIRMLY TIGHTEN BOLTS WITH ALLEN KEY WHILE THE OTTOMAN
IS UPRIGHT AS PICTURED ABOVE(IF THE CHAIR WOBBLY, YOU CAN
EASY ADJUST LEG BOTTOM PLASTIC SCREW)
STEP1 THE LEGS ARE PACKED TOGETHER WITH HARDWARE,OPEN TO
TAKE THE LEGS AND HARDWARE.