JWA CLYDE 68721 User manual

1
Imported by JWA Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please refer to your receipt
ASSEMBLY INSTRUCTION
CLYDE
ITEM CODE 68721
COFFEE TABLE

2
PRE-ASSEMBLY PREPARATION
Allow 15 min For 1 person
Before you start:
1. Choose aclean, level, spacious assembly area.Avoid hard surfaces that may
damage the product
2. Take care when lifting.Product should be assembled as near as possible to the
point of use
3. Ensure that you have all required contents for complete assembly
4. Always read the assembly instructions carefully before beginning assembly.
5. Keep all hardware parts and packaging out of reach of small children.
6. Do not over tighten the screws and bolts as this may damage the threads
7. Assembly is to be carried out by acompetent adult(s) ONLY
8. During assembly, children should be kept away from the product due to possible
risk to injury.
9. Do not use this item if any components are missing or damaged.
10. Please keep the instructions for future reference.

3
PARTS LIST
1Tray table x 2
2Clear Tempered glass x 1
3Tabletop frame x 1
4Dark Tempered glass x 1
5Bars x 2
6Leg frame x 2

4
STEP 1:
• Prepare a surface with a protective blanket or cardboard.
• Connect the 2x leg frames(6) together with the 2x bars(5), as
shown below. Secure with bolt(A) at the connection points.
Fasten with allen key(B).
• Place the tabletop frame on, secure with bolt(A). Fasten with
allen key(B).
• Only fasten until the bolt is tight in the thread, do not fully fasten
for now.

5
STEP 2:
• Place the frame onto a level surface.
• Press down on the corners until the frame levels out. Do not lean beyond
your own balance.
• Once level, go around and fully tighten all the bolts.
STEP 3:
• Insert the dark glass(4) as shown below into the lower frame.
• Insert the clear glass(2) as shown below into the upper frame.

• Place the 2x tray tables(1) on the table.
STEP 3:
6
ASSEMBLY IS COMPLETE

7
PRODUCT CARE:
If the glass is chipped or broken, stop using the product and consult place of
purchase
WARNING:
•Do not place very hot or cold items on the glass surface unless adequately
thick table mats are used to prevent such items coming in contact with the
glass
•Do not sit or stand upon the glass surface
•Do not use the glass as a chopping surface
•Do not strike the glass with hard or pointed items
•When cleaning the glass panels use a damp cloth or leather with washing up
liquid or soft soap if necessary. Do not use washing powders or any other
substances containing abrasives since these may scratch the glass