Simpli Home FOLEY AXCOCHR-14-DSTB User manual

SWIVEL OFFICE CHAIR
MODEL # AXCOCHR-14-DSTB
FOLEY / PARKS / ANDERSON
1

For Fastest Customer Service
*If you’ve purchased from a retailer and you wish to return the product, please contact
the retailer directly.
VISIT US
Visit our site directly at
www.simpli-home.com
SPEAK WITH US
1-866-518-0120
MONDAY TO FRIDAY
9 AM TO 5 PM EST.
EMAIL US
[e-mail]
Other ways to contact us…
1. Open your phone’s camera.
2. Point your phone’s camera at the QR code to scan.
3. Click on the pop up.
4. You’ll be taken to our customer service page.
5. Fill the form with your order information and issue.
6. Submit form.
7. A customer service associate will contact you.
2

IMPORTANT: Please read this manual carefully before beginning assembly
of this product. Keep this manual for future reference.
This furniture is designed for indoor use.
Identify all the parts and hardware. Do not discard of the packaging until
you have checked that you have all the parts and hardware required.
Hardware package may have spare parts.
WARNING: This item contains small parts which can be swallowed by
children and pets. Keep children and pets away during assembly. To avoid
danger of suffocation, always keep plastic bags away from children and pets.
We recommend that you assemble this unit on a carpeted floor to avoid
scratches. If using power tools, set the tool to low torque to avoid damage.
May require 2 people for ease of assembly.
SAFETY INFORMATION
CARE and MAINTENANCE
Wipe regularly with clean water and a damp, clean, soft white cloth.
General cleaning can be done as needed with a mild detergent and water
solution. Always rinse with clean water and dry.
For heavy soiling, dampen a soft white cloth or soft bristle brush.
Use care as scrubbing can damage the surface.
More difficult stains can be treated, but this should be occasional, not daily
cleaning. ANY cleaning solution used must be removed with clean water and
a clean white cloth. Cleaning residue left on the material can cause it to dry
out and crack or affect the color.
DO NOT use any cleaners with corrosive ingredients (lye, acids or ammonia).
3

BACK
QTY 1
C
BA
SEAT
QTY 1
LEFT ARM
QTY 1
MECHANISM
QTY 1
FE
D
GAS LIFT
QTY 1
BASE
QTY 1
CASTER
QTY 5
H
G
GAS LIFT CAP
QTY 1
I
RIGHT ARM
QTY 1
PRE-ASSEMBLY INFORMATION
PART DESCRIPTION
4
MODEL # AXCOCHR-14-DSTB

21 3
54
SHORT BOLT
M6 x 20 mm
QTY 4
LONG BOLT
M6 x 25 mm
QTY 8
WASHER
M6 x 18 mm
QTY 4
CAP
QTY 8
ALLEN KEY
M6
QTY 1
PRE-ASSEMBLY INFORMATION
HARDWARE DESCRIPTION
5
MODEL # AXCOCHR-14-DSTB

STEP 1
1. Place the Base G upside down on a flat smooth surface.
2. Attach the Casters H to the Base G .
3. Turn the Base G right side up and attach Gas Lift F and Gas Lift Cap I
to the Base G .
ASSEMBLY
6
MODEL # AXCOCHR-14-DSTB

1. Place the Seat B on its back on a flat smooth surface.
2. Attach the Mechanism E to the bottom of the Seat B using Bolts 1 and
four Washers 3 .
3. Use Allen Key 5 to tighten.
ASSEMBLY
7
STEP 2
MODEL # AXCOCHR-14-DSTB

STEP 3
1. Place the Seat B right side up on the Gas Lift F .
2. Attach the Left Arm C and Right Arm D to the Seat B using
two Long Bolts 1 on the bottom two holes of each Arm C and D .
3. Use Allen Key 5 to tighten.
ASSEMBLY
8
MODEL # AXCOCHR-14-DSTB

STEP 4
1. Attach the Left Arm C and Right Arm D to the Back A using
one Long Bolt 1 on the second hole from the top of each Arm C and D .
2. Use Allen Key 5 to tighten.
ASSEMBLY
9
MODEL # AXCOCHR-14-DSTB

STEP 5
1. Straighten the Back A to an upright position.
2. Complete attaching the Left Arm C and Right Arm D to the Back A using
one Long Bolt 1 on the first hole of top of each Arm C and D .
3. Use Allen Key 5 to tighten.
ASSEMBLY
10
MODEL # AXCOCHR-14-DSTB

STEP 6
1. Place four Caps 4 on each Arm C and D .
11
ASSEMBLY MODEL # AXCOCHR-14-DSTB

12
ASSEMBLY
1. The tension knob is located under the seat cushion.
2. Turn the knob clockwise to tighten the tilt mechanism.
3. Turn the knob counter-clockwise to loosen the tilt mechanism.
STEP 7
MODEL # AXCOCHR-14-DSTB

13
ASSEMBLY
1. To raise the seat, lift your weight off the seat and reach underneath
the right side of the chair to lift the handle up slowly with a clockwise
twisting motion to allow the chair to rise to desired height.
2. To lower seat, lift the handle slowly with a clockwise twisting motion
while seated.
STEP 8
MODEL # AXCOCHR-14-DSTB

14
ASSEMBLY
To tilt the chair while seated:
1. Pull the handle outward to unlock.
2. Push the handle inward to lock into position.
STEP 9
MODEL # AXCOCHR-14-DSTB

WARRANTY
Thank you for purchasing a Simpli Home –Wyndenhall –Brooklyn + Max
product. These products have been made to demanding, high-quality standards
and are guaranteed for domestic use against manufacturing faults for a period
of 12 months from the date of purchase. This warranty does not affect your
statutory rights.
In case of any malfunction of your product (failure, missing parts, etc.) please
contact us at our toll-free service line at 1-866-518-0120, Monday to Friday,
from 9 AM to 5 PM EST or visit our website at www.simpli-home.com to
submit a parts request.
We reserve the right to repair or replace the defective product, at our
discretion.
This product is guaranteed for 12 months if used for normal purposes. Any
warranty is invalid if the product has been overloaded or subject to neglect,
improper use or an attempted repair by other than an authorized agent.
Heavy-duty or daily professional/commercial usage are not guaranteed.
Due to continuous product improvement, we reserve the right to change the
product specifications without prior notice.
15