Dorel Asia WM3514 User manual

Model No:
WM3514
(TAKEN FROM CARTON)
Date of purchase:
INFORMATION. PLEASE READ
AND KEEP FOR FUTURE
DOREL ASIA
UPC CODE:
0-65857-15762-8
NOTE:
COUNTER HEIGHT
DESK
THIS INSTRUCTION BOOKLET
CONTAINS IMPORTANT SAFETY
_______ / _______ / _______
REFERENCE.
Lot number:
___________________
DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, contact our customer
service department. We will replace the
part FREE of charge.
Tel #: [phone]
E-Mail: [e-mail]
Fax #: [phone]
NEED HELP!
CALL US FOR ASSISTANCE
1-800-295-1980
DO NOT RETURN PRODUCT TO STORE
E-MAIL:[e-mail]

*
*
*
*
*
*
*
Dust regularly with a soft, dry cloth to prevent soil build up. A dampened cloth may be
used occasionally to clean the surface. Dry immediately and buff lightly, following the
grain. Avoid using harsh cleaners and abrasive products. Excessive exposure to sunlight
and extreme changes in temperature and moisture can damage wood furniture.
MAINTENANCE
Check bolts/screws periodically and tighten them if necessary.
LIMITED WARRANTY
E-MAIL: [email protected]
NOTES:
Dorel Asia warrants its product to be free from defects in material and workmanship and
agrees to remedy any such defect. This warranty covers 1 year from the date of original
purchase. This warranty is valid only upon presentation of proof of purchase. This is
solely limited to the repair or replacement of defective furniture components and no
assembly labor is included. This warranty does not apply to any product which has been
improperly assembled, subjected to misuse or abuse or which has been altered or repaired
in any way. This warranty gives you specific legal rights and you may also have other
rights which vary from State to State.
WARNING: Should this product become
damaged, and/or components are broken or
missing, DO NOT USE.
Phillips head screw driver is not included.
DO NOT use power tools.
CAUTION: Adult assembly required.
Assembly will require two people.
Estimated assembly time: 30 minutes.
CARE AND CLEANING
Ensure all parts and components are present before beginning assembly.
Assemble on soft, smooth surface to prevent damage to product finish.
CUSTOMER SERVICE
If you are missing parts or have any questions about this product, contact our customer service representative first!
CALL 1-800-295-1980
You can also order parts by writing to the address listed below. Please include the product model
number, color and a detailed description of the part.
Customer Service Department No. 413
12345 Albert-Hudon Boulevard, Suite 100
Montreal, Quebec
Canada H1G 3L1

COUNTER HEIGHT DESK
Ø3 x 12 MM
Ø5/32'' x 3/4''
HEX SOCKET HEAD BOLT
26 PCS
WM3514
5
4
3
KNOB
2 PCS
HARDWARE LIST
FLAT HEAD SCREW
12 PCS
Ø1/4'' x 3''
FLAT HEAD SCREW
16 PCS
ROUND HEAD BOLT
2 PCS
Ø5/32'' x 1''
1
Ø1/8" x 1/2"
ROUND HEAD SCREW
2 PCS
SHELF SUPPORT
4 PCS
CAM BOLT
6 PCS
2
7
8
10
11
6
BARREL NUT
26 PCS
9
13
WOOD DOWEL
28 PCS
Ø6 x 30 MM
DRAWER STOPPER
2 PCS
ALLEN KEY
1 PC
CAM LOCK
6 PCS
12

A
B
PARTS LIST
G
H
RIGHT SIDE PANEL
1 PC
E
F
DRAWER FRONT
2 PCS
RAIL
3 PCS
WM3514
COUNTER HEIGHT DESK
DRAWER SIDE
4 PCS
TOP PANEL
1 PC
SUPPORT RAIL
1 PC
C
DRAWER BOTTOM
2 PCS
D
DRAWER BACK
2 PCS

PARTS LIST
O
P
DIVIDER PANEL
1 PC
SMALL TOP PANEL
1 PC
BACK PANEL LOWER RAIL
1 PC
DRAWER MIDDLE RAIL
1 PC
M
N
SHELF
2 PCS
BACK PANEL
1 PC
K
L
RAIL
3 PCS
BACK PANEL UPPER RAIL
1 PC
I
J
COUNTER HEIGHT DESK
WM3514

PARTS LIST
U
V
LEFT SHELF
1 PC
LEFT SIDE PANEL
1 PC
ADJUSTABLE SHELF
1 PC
DIVIDER
2 PCS
X
W
LEFT LOWER RAIL
1 PC
LEFT BACK UPPER RAIL
1 PC
S
T
LEFT FRONT UPPER RAIL
1 PC
LEFT CENTER RAIL
1 PC
Q
R
WM3514
COUNTER HEIGHT DESK

STEP 1
COUNTER HEIGHT DESK
WM3514
Attach drawer sides (B) to drawer front (A) with flat head screws (1).
Slide drawer bottom (C) into the grooves of the drawer sides (B) and drawer front (A).
Attach drawer back (D) to drawer sides (B) with flat head screws (1).
Attach knob (3) to drawer front (A) with round head bolt (2).
Use a Phillips head screw driver (not included) to tighten all flat head screws (1) and round head
bolts (2).
NOTE: Repeat this step to assemble the other drawer.

STEP 2
COUNTER HEIGHT DESK
WM3514
Attach support rail (F) to the top panel (E) with flat head screws (4).
Use a Phillips head screw driver (not included) to tighten the screws.

STEP 3
WM3514
COUNTER HEIGHT DESK
Insert wood dowels (7) into right side panel (G) as shown below.
Insert barrel nuts (6) into rails (H & I), back panel upper rail (J) and back panel lower rail (K) as
shown below.
Attach rails (H & I), back panel upper rail (J) and back panel lower rail (K) to right side panel (G)
with hex socket head bolts (5). Use Allen key (11) to tighten bolts.
Attach drawer stoppers (12) to drawer middle rail (L) with round head screws (13) using Phillips
head screw driver (not included)
Attach drawer middle rail (L) to right side panel (G).

STEP 4
WM3514
Insert one shelf (M) into the grooves of rails (H) as shown below.
Insert another shelf (M) into the grooves of rail (H) and back panel upper rail (J) as shown below.
Insert the back panel (N) into the grooves of back panel upper rail (J) and back panel lower rail
(K) as shown below.
COUNTER HEIGHT DESK

STEP 5
COUNTER HEIGHT DESK
WM3514
Insert wood dowels (7) and barrel nuts (6) into rails (H & I), back panel upper rail (J), back panel
lower rail (K) and drawer middle rail (L) as shown below.
Attach divider panel (O) to the assembled unit with hex socket head bolts (5) as shown below.
Use Allen key (11) to tighten bolts.

STEP 6
COUNTER HEIGHT DESK
WM3514
Insert cam bolts (8) into the correct hole of left back upper rail (R) and left front upper rail (S) as shown below.
Insert cam locks (9) and wood dowels (7) into the correct hole of left center rail (T) as shown below.
Fasten left center rail (T) to left back upper rail (R) and left front upper rail (S) by rotating cam locks (9) 1/2 turn
clockwise.
Insert wood dowels (7) into the correct hole of divider panel (O).
Insert barrel nuts (6) into the correct hole of left lower rail (Q), left back upper rail (R) and left front upper rail (S) as
shown below.
Attach left lower rail (Q), left back upper rail (R) and left front upper rail (S) to divider panel (O) with hex socket head
bolts (5).
Use Allen key (11) to tighten bolts.

STEP 7
COUNTER HEIGHT DESK
WM3514
Insert left shelf (U) into the grooves of left back upper rail (R) and left front upper rail (S).

STEP 8
COUNTER HEIGHT DESK
WM3514
Insert wood dowels (7) and barrel nuts (6) into the correct hole of left back upper rail (R), left
front upper rail (S) and left lower rail (Q).
Attach left side panel (V) to the assembled unit with hex socket head bolts (5).
Use Allen key (11) to tighten all the bolts.

STEP 9
COUNTER HEIGHT DESK
WM3514
Insert cam bolts (8) into the correct hole of small top panel (P).
Insert cam locks (9) into the correct hole of right side panel (G) and divider panel (O).
Fasten small top panel (P) to right side panel (G) and divider panel (O) by rotating cam locks (9) 1/2 turn
clockwise.
Insert dividers (W) into the grooves of left back upper rail (R) and left front upper rail (S) as shown below.
Attach top panel (E) to left front upper rail (S) with flat head screws (4) using a Phillips head screw driver (not
included)
Insert shelf supports (10) into the right side panel (G) and divider panel (O).
Place adjustable shelf (X) on top of the shelf supports (10).
Insert the two drawers into the unit.

That's it ! You've finished assembling your counter height desk .
DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, contact our customer
service department. We will replace the part FREE of
charge.
Tel #: [phone]
E-Mail: [email protected]
Fax #: [phone]
CAUTION: This unit is intended for use only with the
products and/or maximum weights indicated. Use with other
products and/or products heavier than the maximum weights
indicated may result in instability or cause possible injury.
COUNTER HEIGHT DESK
WM3514
15 lbs
NEED HELP!
CALL US FOR ASSISTANCE
1-800-295-1980
DO NOT RETURN PRODUCT TO STORE
E-MAIL:[e-mail]

MODEL #: WM3514
PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE
PLEASE CONTACT CUSTOMER SERVICE REPRESENTATIVES AT THE FOLLOWING
NUMBERS SHOULD THERE BE ANY MISSING OR DEFECTIVE PART(S).
Request Date:
Name:
Street & Number:
City & State:
Zip Code:
Day Time Phone Number:
(including area code)
Date & Place of Purchase:
Part(s) description and quantity: (Please be sure to list model number or SKN number)
Shipping
Address:
Customer Service Department No. 413, 12345 Albert-Hudon Boulevard, Suite 100, Montreal, QC, Canada, H1G 3L1
Customer Service
Email: [email protected]
Customer Service Representative Mailing Address:
Customer Service Phone Number 1-800-295-1980
Customer Service Fax Number 514-353-7819
C
B
E
A
B
B
B
C
B
E
A
B
B
B
C
B
E
A
B
B
B