Simplicity 4564 Setup guide

Attachment
Illustrated
Parts List
Rev. 04/2007
500 N. Spring Street / PO Box 997
Port Washington, WI 53074-0997 USA
www.simplicitymfg.com
MANUFACTURING, INC.
© Copyright Simplicity Manufacturing, Inc. All Rights Reserved. Printed In USA.2007 TP 400-4564-00-AT-SMA
Mf
g
. No. Descri
p
tion
Attachment
1694693 Catcher, Turbo Clean Sweep Twin
1734848
Part No.:

Table Of Content
s
Torque Specification Chart ..................................................................... Inside Back Cover
PRODUCT COMPONENTS PAGES
Cover & Bag Group - Twin ................................................................................................................................... 4
Hitch Group .......................................................................................................................................................... 6
Tube Group .......................................................................................................................................................... 8

Cover & Bag Group - Twin
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
983952
The above parts group applies to the following Mfg. Nos.:
4
2007Copyright © by Briggs and Stratton Corporation
Briggs and Stratton Yard Power Products Group
Milwaukee, WI, USA. All rights reserved
1694693 - Catcher
TP 400-4564-00-AT-SMA

PART NO. DESCRIPTIONREF NO QTY.
Cover & Bag Group - Twin
Footnotes
TUBE ASSEMBLY Support (Incl. Ref. Nos. 2, 3, 4, 5, 6, 8, 9 & 11)1 1704615SM 1
RIVET, Pop2 1960381SM 7
SUPPORT, Tube3 1704075SM 1
SEAL, Cover4 1704135SM 1
BRACKET, Seal5 1704508SM 3
SCREW, Round Head, #8-32 x 7/86 1960399SM 1
LOCKNUT, Flange, 1/4-207 1930642SM 5
WASHER8 1960096SM 2
STRAP, Tube Support9 1704507SM 1
SCREW, Taptite, 1/4-20 x 3/810 1929000SM 2
NUT, Hex, Lock, #8-3211 1960077SM 2
CARRIAGE BOLT, 1/4-20 x 5/812 1960252SM 5
CROSS ASSEMBLY13 1727129ASM 1
CROSS ASSEMBLY13 1727129ASM 1
CAPSCREW, Hex Head, 3/8-16 x 7/814 1921966SM 4
NUT, Hex, Whizlock, 3/8-1615 1928352SM 4
CLIP, Hairpin16 1960221SM 2
SCREEN17 1703700SM 1
NUT, Hex, 5/16-1818 1917372SM 4
LOCKWASHER, 5/1619 1917356SM 4
CLAMP20 1672023ASM 2
HANGER21 1703807ASM 2
CARRIAGE BOLT, 5/16-18 x 3/422 1931333SM 4
HOOP, Bag23 1703855ASM 2
BAG, Grass24 1703764SM 2
TUBE CLIP, Grass Bag25 1675707SM 2
SEAL, Clip26 1704057SM 1
SCREW, Truss Head, #10-32 x 1/227 1930531SM 2
RIVET, Pop28 1675043SM 4
HANDLE, Latch29 1703853SM 1
NUT, Hex, #10-3230 1928919SM 2
PIN, Round Head31 2860367SM 2
WASHER32 1910531SM 4
CLIP, Canoe33 1667248SM 6
DECAL, Safety34 1732820SM 1
COVER35 1704056SM 1
WINDOW36 1704180SM 2
NUT, Speed37 1933886SM 1
CABLE, Double Loop38 1705876SM 1
WASHER, 1/439 1921319SM 1
SCREW, Self-tapping, #10-12 x 5/840 1960400SM 1
COVER ASSEMBLY (Incl. Ref. Nos. 17, 26, 28, 32, 37, 38, 39 & 40)41 1704056SM 1
The above parts group applies to the following Mfg. Nos.:
5
2007Copyright © by Briggs and Stratton Corporation
Briggs and Stratton Yard Power Products Group
Milwaukee, WI, USA. All rights reserved
1694693 - Catcher
TP 400-4564-00-AT-SMA

Hitch Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
986032
The above parts group applies to the following Mfg. Nos.:
6
2007Copyright © by Briggs and Stratton Corporation
Briggs and Stratton Yard Power Products Group
Milwaukee, WI, USA. All rights reserved
1694693 - Catcher
TP 400-4564-00-AT-SMA

PART NO. DESCRIPTIONREF NO QTY.
Hitch Group
Footnotes
CAPSCREW, Hex Head, 1/2-13 x 2-1/21 1960462SM 4
WASHER2 1924361SM 4
SPACER3 1668662SM 4
LOCKNUT, Hex, 1/2-134 1960355SM 4
NUT, Hex, 3/8-165 1916950SM 6
LOCKWASHER, 3/86 1916965SM 6
SUPPORT, Upright7 1707526ASM 1
CAPSCREW, Hex Head, 3/8-16 x 18 1921210SM 6
BRACKET, Lower Hitch9 1703744ASM 1
SUPPORT, Side Hitch10 1723067ASM 2
CAPSCREW, Hex Head, 3/8-16 x 1-1/411 1920415SM 6
PLATE, Side12 1723044ASM 2
CLIP, Hair Pin13 1960033SM 2
CARRIAGE BOLT, 3/8-16 x 3/414 1931348SM 4
CLAMP, Hitch15 1723065SM 1
CLAMP, Plate16 1723064ASM 1
NUT, Hex, 5/16-1817 1917372SM 2
LOCKWASHER18 1917356SM 2
PIN, Round Head, Drilled19 1729281SM 2
SPACER20 1960236SM 2
CARRIAGE BOLT, 5/16-18 x 1-1/421 1960223SM 2
SUPPORT, Upright22 1707526ASM 1
The above parts group applies to the following Mfg. Nos.:
7
2007Copyright © by Briggs and Stratton Corporation
Briggs and Stratton Yard Power Products Group
Milwaukee, WI, USA. All rights reserved
1694693 - Catcher
TP 400-4564-00-AT-SMA

Tube Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
T986032
The above parts group applies to the following Mfg. Nos.:
8
2007Copyright © by Briggs and Stratton Corporation
Briggs and Stratton Yard Power Products Group
Milwaukee, WI, USA. All rights reserved
1694693 - Catcher
TP 400-4564-00-AT-SMA

PART NO. DESCRIPTIONREF NO QTY.
Tube Group
Footnotes
NUT, Hex Nylock, #10-321 1933896SM 2
WASHER2 1960096SM 6
ELBOW, Upper4 1704283SM 1
SCREW, Truss Head, #10-32 x 1/25 1960404SM 2
RIVET6 2810542SM 2
CLIP, Spring7 1705063SM 1
TUBE & SPRING ASSEMBLY (Incl. Ref. Nos. 2, 6, & 7)8 1707712SM 1
CARRIAGE BOLT, 1/4-20 x 5/89 1960252SM 1
NUT, Hex Flange Lock, 1/4-2010 1930641SM 1
The above parts group applies to the following Mfg. Nos.:
9
2007Copyright © by Briggs and Stratton Corporation
Briggs and Stratton Yard Power Products Group
Milwaukee, WI, USA. All rights reserved
1694693 - Catcher
TP 400-4564-00-AT-SMA

Torque Specification Chart
FOR STANDARD MACHINE HARDWARE (Tolerance ± 20%)
Hardware
Grade
SAE Grade 2 SAE Grade 5 SAE Grade 8
Size Of in/lbs in/lbs in/lbs
Hardware ft/lbs Nm. ft/lbs Nm. ft/lbs Nm.
8-32 19 2.1 30 3.4 41 4.6
8-36
20 2.3 31 3.5 43 4.9
10-24
27 3.1 43 4.9 60 6.8
10-32
31 3.5 49 5.5 68 7.7
1/4-20
66 7.6 810.9 12 16.3
1/4-28
76 8.6 10 13.6 14 19.0
5/16-18 11 15.0 17 23.1 25 34.0
5/16-24 12 16.3 19 25.8 27 34.0
3/8-16 20 27.2 30 40.8 45 61.2
3/8-24 23 31.3 35 47.6 50 68.0
7/16-14 30 40.8 50 68.0 70 95.2
7/16-20 35 47.6 55 74.8 80 108.8
1/2-13 50 68.0 75 102.0 110 149.6
1/2-20 55 74.8 90 122.4 120 163.2
9/16-12 65 88.4 110 149.6 150 204.0
9/16-18 75 102.0 120 163.2 170 231.2
5/8-11 90 122.4 150 204.0 220 299.2
5/8-18 100 136 180 244.8 240 326.4
3/4-10 160 217.6 260 353.6 386 525.0
3/4-16 180 244.8 300 408.0 420 571.2
7/8-9 140 190.4 400 544.0 600 816.0
7/8-14 155 210.8 440 598.4 660 897.6
1-8 220 299.2 580 788.8 900 1,244.0
1-12 240 326.4 640 870.4 1,000 1,360.0
Hex Head Capscrew
Hex Nut
Lockwasher
Washer
Carriage Bolt
NOTES
1. These torque values are to be used for all hardware
excluding: locknuts, self-tapping screws, thread forming
screws, sheet metal screws and socket head setscrews.
2. Recommended seating torque values for locknuts:
a. for prevailing torque locknuts - use 65% of grade 5
torques.
b. for flange whizlock nuts and screws - use 135% of
grade 5 torques.
3. Unless otherwise noted on assembly drawings, all torque
values must meet this specification.
Hardware Identification & Torque Specifications
Common Hardware Types
Screw, 1/2 x 2
Body
Diameter
Body
Length
Inside
Diameter
Nut, 1/2”
No
Marks
3/8” Bolt or Nut
Wrench—9/16”
3/8
5/16” Bolt or Nut
Wrench—1/2”
5/16
1/4” Bolt or Nut
Wrench—7/16”
1/4
1/2” Bolt or Nut
Wrench—3/4”
1/2
DIA.
7/16
DIA.
7/16” Bolt or Nut
Wrench (Bolt)—5/8”
Wrench (Nut)—11/16”
Wrench & Fastener Size Guide
Standard Hardware Sizing
When a washer or nut is identified as 1/2”, this is the
Nominal size , meaning the inside diameter is 1/2 inch; if a
second number is present it represent the
threads per inch
When bolt or capscrew is identified as 1/2 - 16 x 2”, this
means the
Nominal size , or body diameter is 1/2 inch; the
second number represents the
threads per inch (16 in this
example, and the final number is the
body length of the
bolt or screw (in this example 2 inches long).
The guides and ruler furnished below are designed to
help you select the appropriate hardware and tools.
0
1/4 3/4
1/2
1
1/4 3/4
1/2
2
1/4 3/4
1/2
3
1/4 3/4
1/2
4