Simplified MFG RPS1 User manual

1 / 15
RPS1
4K 5x1 Multi-format
Scaler Switcher
Thank you for purchasing this device
The Simplified MFG EX1 is designed to provide years of reliable service. At
Simplified MFG, we want the experience with this device to be the best possible and
are committed to helping achieve that experience.
Surge protection device recommended
This product contains sensitive electrical components that may be damaged
by electrical spikes, surges, electric shock, lightning strikes, etc. Use of surge
protection such as the HDSURGE and other systems is highly recommended in
order to protect and extend the life of your equipment.

2 / 15
Table of Contents
1. Introduction ................................................................. 2
2. Features........................................................................ 2
3. Package Contents ......................................................... 3
4. Specifications ............................................................... 4
5. Operation Controls and Functions ................................ 5
6. Connection Diagram ................................................... 13
1. Introduction
The RPS1 is a Multi-input presentation switch with 5 inputs consisting of
4xHDMI and 1xVGA(YPbPr,CVBS). Each input source is switched and scaled to
adopt resolution then output through the HDMI port. The resolution and
aspect ratios are adjustable. The system can be controlled via front touch-
panel button, IR remote, and RS-232. The RPS1 is 18gbps 4K capable and
can accept nearly any resolution input making it a great solution for class
rooms, courtrooms, and boardrooms.

3 / 15
2. Features
•Compliant with HDMI2.0/1.4b, HDCP2.2/1.4
•Supports multi inputs: 4 x HDMI, 1 x VGA ( YPbPr, CVBS)
•Supports HDMI input resolutions up to 4K UHD 4:4:4 @50/60
•Supports output resolutions up to 4K UHD 4:4:4 @60
•Two input switching modes: auto or manual
•User assignable EDID
•PCM 2CH audio pass through
•Device could be controlled via touch panel button, IR remote and RS-232
•Supports USB online software upgrading
3. Package Contents
•1xRPS1 Scaling Presentation Switch
•2xMounting Ears
•1xRemote Control
•1xIR Receiver
•1x12V/2.5A Power Adapter
•1x 3RCA(Female) to D-SUB(Male) Cable
•1x3.5mm Jack(Male) to 2RCA(Female) Cable
•1xUser Manual

4 / 15
4. Specifications
Technical
HDMI Compliance
HDMI 2.0/1.4b
HDCP Compliance
HDCP 2.2/1.4
Video Input Resolutions
HDMI: up to 4K2K@50/60Hz(4:4:4)
C-Video: PAL/NTSC3.58/NTSC4.43/SECAM/PAL M/PAL N
YPBPR: 480i to1080p
VGA: 640x480 to1920x1200
HDMI Output
Resolutions
•4K2K60,4K2K30,1920X1080p/50, 1920X1080p/60,
•1280X720p/50, 1280X720p/60 1024x768/60,1280x800/60,
•1360x768/60,1400x1050/60,1680x1050/60,1920x1200/60;
Audio Formats
LPCM 2.0CH
ESD Protection
Human body model —±8kV (air-gap discharge) & ±4kV (contact discharge)
Connections
Input ports
•4x HDMI Type A [19-pin female]
•1x VGA[female]
•1x Micro USB [5-pin female], optional for Power Supply
Output ports
•1x HDMI Type A [19-pin female]
•1x3.5mm mini jack
Control interfaces
•1x IR in
•1x RS-232
•1x USB service(update)
Mechanical
Housing
Metal
Color
Black
Dimensions
110mm [W] x 288mm [D] x 32mm [H]
Weight
880g
Power Supply
DC 12V/2.5A Adaptor (US/EU standards, CE/FCC/UL certified)

5 / 15
Power Consumption
9W(max)
Operation Temperature
32 - 104°F / 0 - 40°C
Storage temperature
-4 - 140°F / -20 - 60°C
Relative Humidity
20 - 90% RH (no condensation)
5. Operation Controls and Functions
5.1 Front Panel
Power button and indicator:
Switches between standby and work mode. When this device is switched to the
standby mode, the indicator turns red. When switching to work mode, the indicator
turns blue
IR Window:
Receives the IR signal from remote control unit provided with RPS1 switch
Input Source & Auto buttons:
These buttons are for source selection. The active source will be indicated on the
front panel via illumination. The AUTO button is for auto-switching or manual-
switching mode, when the indicator turns blue, the device switch to auto-switching
mode, when the indicator turns off, the device switch to manual-switching mode
Output Resolution buttons:
These buttons are for output resolution selection. Select between 4K60,4K30,
1080P60,720P60. For more resolutions options, please use remote control or
RS-232 control tools

6 / 15
5.2 Rear Panel
Output:
HDMI output for connecting to an HDMI display or other HDMI device
L/R stereo audio output to the analog audio input port of your amplifier
Input:
The input ports include 4 HDMI & 1 VGA input ports. The VGA ports supports
YPbPr, C-video and VGA input formats. YPbPr adapter is included
Control:
USB
USB port is used to update the system firmware
RS232
Serial control port, 3p Phoenix connector, connects with a control device (such
as a third-party control system) to control the scaler switcher
IR
Connects with IR receiver, to receive IR signals sent by the IR remote or IR output
from a third-party control system
Power:
Plug the 12V DC power supply into the unit and connect the adaptor to an AC outlet
ON/OFF:
Power ON/OFF switch

7 / 15
5.3 OSD MENU
The RPS1 provides a powerful OSD operation menu. Press MENU button on IR remote to enter in OSD
menu, Users can then change settings through the OSD menu.
5.3.1 Main MENU
The Main MENU includes Picture, Aspect ratio, Screen, EDID, and Software update options.
5.3.2 Picture
The user can adjust picture contrast(default:50), brightness(default:50), color(default:30), sharpness
(default:10) etc.

8 / 15
5.3.3. Aspect Ratio
The user can adjust picture output aspect ratio to 4:3 or 16:9 .
5.3.4 Screen
The screen MENU is an adjustment for VGA input only. The user can adjust horizontal, vertical position,
size and phase.

9 / 15
5.3.5 EDID
The EDID adjust MENU for HDMI input only. EDID1.4 for HDMI1.4 standard. EDID2.0 for HDMI2.0
Standard, and EDID AUTO for copy the display EDID Mode.
5.3.6 Software update
The RPS1 supports software updates via USB flash disk. The procedure is as follows:
1) Copy the file “MERGE.bin” to the root directory of a USB flash disk. (Make sure the file is copied to
the root directory. The “MERGE.bin” file is provided/authorized by our engineering department or from
our website)
2) Plug the USB flash disk to the scaler switcher USB port on its rear panel.
3) Press the MENU -->software update-->YES enter to start the update.the OSD will display the update
process.

10 / 15
5.3.7 Resolution
The RPS1’s HDMI output can be set to multiple different resolutions. Press the “RES” button
on the IR remote, the resolution menu will display. The user can select suitable resolution for
HDTV or monitor. Auto means that the HDMI resolutions based on the EDID information read
from the display device.
5.4 Remote Control
①Press this button to power on the scaler
switcher or set it to standby mode.
②Press this button for mute or unmute the audio
output.
③Press this button for operate VGA input auto
adjustment function;
④Press these buttons for select the input source.
⑤Press this button for select HDMI output
resolution. (Press and hold 5 seconds or more, the
HDMI output resolution will reset to 720p60Hz.)
⑥Menu operation buttons:
MENU: press to enter in OSD menu.
EXIT: press to exit OSD menu.

11 / 15
OK: confirm button.
UP/DWON/LEFT/RIGHT button: for OSD value setting.
⑦VOL-/+ decrease or increase audio volume, MIC-/+ is Unused.
5.5 Auto-Switching function
The RPS1 has an auto-switching mode and manual-switching mode. When the user selects
auto-switching mode, it will react as follows:
5.5.1. New input principle
Once a new input signal is detected, the RPS1 will switch to this new signal automatically.
5.5.2. Power rebooting principle
The RPS1 offers the function to remember the signal last used after rebooting. Once
rebooted, it will automatically enter auto-switching mode, and then detect all inputs and
memorize their connection status for future reboots. If the last used input signal is still
available, then it will choose that signal. If not, it will detect all input signals with priority on
HDMI1->HDMI2->HDMI3->HDMI4->VGA(YPbPr/CVBS).
5.5.3.Signal removing principle
Once the current signal is removed, the RPS1 will detect all input signals with priority on
HDMI1->HDMI2->HDMI3->HDMI4->VGA(YPbPr/CVBS). It will transfer the first signal
detected to the output.
Notice: Auto-switching function works only when there is a new input signal or if an input
signal is removed.
5.6 VGA/YPbPr/CVBS input
The VGA input port is a multiple format port, it can accept a VGA, YPbPr, or CVBS input
signal. The RPS1 will auto detect the input signal type and format. A converter cable is
provided for use with YPbPr or CVBS inputs.

12 / 15
5.7 Operations of RS232 Control
Please connect the RPS1 with input devices and output device needed, then connect it with a
computer that is installed with RS232 control software. Double-click the software icon to run
this software on your computer. The interface of the control software is showed as below:

13 / 15
6. Connection Diagram
1. Connect HDMI source devices (e.g. Blu-ray DVD) to HDMI input ports of the RPS1
with HDMI cable. Connect VGA source device (eg. PC/note-book) to VGA input ports
of the scaler switcher with a VGA cable.
2. Connect HDMI display device to the HDMI output port of the RPS1 with a HDMI
cable.
3. Connect speaker, headphone or specialized amplifier to AUDIO output port of the
RPS1.
4. Connect control device (e.g. PC) to RS232 port of the RPS1.
5. Connect DC12V power adaptor to the power port and power on.
Computer or
Third-party Control
System

14 / 15
Warranty
Should you feel your product does not function adequately due to defects in materials or
workmanship, we (referred to as “the warrantor”) will, for the length of the period indicated
below (starting from the original date of purchase) either: a) Repair the product with new or
refurbished parts. or b) Replace it with a new or refurbished product.
All Simplified MFG products are covered by a 3 year PARTS and LABOR warranty. During this
period there will be no charge for unit repair, replacement of unit components or
replacement of product if necessary. The decision to repair or replace will be made by the
warrantor. The purchaser must mail-in the product during the warranty period. This limited
warranty only covers the product purchased as new and is extended to the original
purchaser only. It is non-transferable to subsequent owners, even during the warranty
period. A purchase receipt or other proof of original purchase date is required for the limited
warranty service.
1. This Limited Warranty ONLY COVERS failures due to defects in materials or
workmanship and DOES NOT COVER normal wear and tear or cosmetic damage. The
limited warranty also DOES NOT COVER damage that occurs in shipment or failures
caused by products not supplied by the warrantor, failures resulting from accident,
misuse, abuse, neglect, mishandling, misapplication, alteration, incorrect
installation, set-up adjustment, implementation of/to consumer controls, improper
maintenance, power line surge, lightening damage, modification, service by anyone
other than a manufacturer-approved service center or factory authorized personnel,
or damage attributable to acts of God.
2. There are no express warranties except as listed under “limited warranty coverage.”
The warrantor is not liable for incidental or consequential damage resulting from the
use of this product or arising out of any breach of this warranty. For example:
damages for lost time, the cost of having a person/persons remove or re-install
previously installed equipment, travel to and from service location, loss of or
damage to media, images, data or other recorded/stored content. The items listed
here are not exclusive, but are for illustration only. Parts and service not covered by
this limited warranty are not the responsibility of the warrantor and should be
considered the responsibility of the individual.

15 / 15
Simplified MFG Publication Disclaimer
The material contained in this document consists of information that is the sole property of Simplified
MFG. This document is intended to provide information to allow interfacing to the relevant Simplified
MFG equipment by third party products. Simplified MFG IS NOT RESPONSIBLE FOR MALFUNCTIONS
AND/OR THE IN-OPERABILITY WHICH MAY BE CAUSED BY THE APPLICATION OF THIS INFORMATION,
WHETHER EXPECTED OR NOT. Simplified MFG reserves the right to change software, control codes
and specifications without notice. Simplified MFG will not be liable for any use of this information or
any changes it may make to those products. The use of this information constitutes an agreement by
the user to these limitations and exclusions.
Contact
Sales and Tech Support
P 1-833-HDMI-411
E [email protected]om

Simplified MFG • 550 W Baseline Road Ste 102-121 • Mesa, AZ 85210 • www.simplifiedmfg.com • 833-HDMI-411 (436-4411)
RPS1 Quick Start Guide
• The RPS1 is a five input scaling presentation
switch (4 HDMI, 1 Combo VGA/Component)
• The RPS1 will both scale and framerate
convert from 60Hz. To 30Hz. In 1080p and in
4K
• The RPS1 will scale to nearly any resolution
(too many to list here), making it nearly a
guarantee that the switch is going to work
with the display chosen
• The RPS1 has an audio breakout and volume
control
Legend
      HDMI
      AV Cat
      Network
      Audio Line
      Speaker
      Ir TX
      Ir RX
      RS232
Legend
      HDMI
      AV Cat
      Network
      Audio Line
      Speaker
      Ir TX
      Ir RX
      RS232
HDMI SourceHDMI Source
HDMI SourceHDMI Source
HDMI SourceHDMI Source
Nearly Any
Resolution Display
HDMI
RS232
Sound BarSound Bar
Optical
Cat6/6A/7/8
EX1L shown
HDMI SourceHDMI Source
Amp
HDMI
HDMI HDMI
HDMI
HDMI
Stereo
Control SystemControl System
RS232
VGA or
Component
RS232

RPS1
HDMI 2.0b (18Gbps)
5 Input Presentation Switch
• 4 HDMI and one convertible VGA
input that will accept component
• Scaling many input resolutions to
many different output resolutions
• Frame rate conversion
• Audio breakout with volume
control
• Picture control allows adjustment
of Contrast and Brightness.
• Compact design
• 3-Year Warranty
833-HDMI–411 (436-4411) • www.simplifiedmfg.com • 550 W Baseline Rd., Ste #102-121 • Mesa, AZ 85210
Specifications:
The RPS1 is a 5 input presentation
switch (4HDMI/1 VGA/Component).
The front panel is capacitive touch
and can be used to switch inputs as
well as auto switching, IR, and RS232
controllable. This device will accept
nearly any resolution input and can
scale to nearly any resolution out in-
cluding frame rate conversion
(30Hz./60Hz. Output at 4K). Other
features include picture control and
an HDMI/3.5mm volume control
Features:
Technical
HDMI
Compliance HDMI 2.0b
HDCP
Compliance HDCP 2.2 / HDCP 1.4
Video Bandwidth 18Gbps
Video
Resolutions
In: 480i/p, 576i/p, 720p, 1080i/p, 800x600, 1024x768,
1280x720, 1920x1080, 4Kx2K @30Hz, 4Kx2K@60Hz.
C Video PAL/NTSC3.58/NTSC4.43/SECAM/PAL M/PAL N
VGA 640x480 to 1920x1080p
Output; 480i/p, 576i/p, 720p, 1080i/p, 800x600,
1024x768, 1280x720, 1920x1080, 4Kx2K @30Hz,
4Kx2K@60Hz.
Color Space RGB, YCbCr 4:4:4, YCbCr 4:2:2
Color Depth 8 Bit, 10-Bit, 12 Bit
HDMI Audio
Formats
(Pass-Through)
LPCM 2.0
ESD Protection Human body model — ±8kV (air-gap discharge) & ±4kV
(contact discharge)
Connections
Inputs
4x HDMI Type A [19-pin female]
1x VGA
2x 3.5mm mini [1 audio, 1 IR]
1x DB9 [RS232]
Outputs 1x HDMI Type A [19-pin female]
1x 3.5mm [audio]
DC Power 1x 12V Screw Down connector
Mechanical
Housing Metal Enclosure
Color Black
Dimensions 288mm [W] x 110mm [D] x 32mm [H] 11.34”x 4.22” x
1.25”
Weight 880g /31 Oz.
Power Supply
Input: AC100 - 240V 50/60Hz
Output: DC 12V/2.5A (US/EU standards, CE/FCC/UL cer-
tified)
Power
Consumption 9W (Max)
Operation
Temperature 32 - 104°F / 0 - 40°C
Storage
Temperature -4 - 140°F / -20 - 60°C
Relative
Humidity 20 - 90% RH (no condensation)