Hirschmann GREYHOUND GRS1020 User manual

Hirschmann Automation and Control GmbH
Reference Manual
Graphical User Interface
User Manual
Configuration
GRS1020-1030 HiOS-2S Rel. 08000

RM GUI GRS
Release
8.0 09/2019
Technical support
https://hirschmann-support.belden.com
Reference Manual
Graphical User Interface
Greyhound Switch GRS1020-1030
HiOS-2S

2019-11-07 RM GUI GRS
Release
8.0 09/2019
The naming of copyrighted trademarks in this manual, even when not specially indicated, should not be taken to mean that
these names may be considered as free in the sense of the trademark and tradename protection law and hence that they may
be freely used by anyone.
© 2019 Hirschmann Automation and Control GmbH
Manuals and software are protected by copyright. All rights reserved. The copying, reproduction, translation, conversion into
any electronic medium or machine scannable form is not permitted, either in whole or in part. An exception is the preparation
of a backup copy of the software for your own use.
The performance features described here are binding only if they have been expressly agreed when the contract was made.
This document was produced by Hirschmann Automation and Control GmbH according to the best of the company's
knowledge. Hirschmann reserves the right to change the contents of this document without prior notice. Hirschmann can give
no guarantee in respect of the correctness or accuracy of the information in this document.
Hirschmann can accept no responsibility for damages, resulting from the use of the network components or the associated
operating software. In addition, we refer to the conditions of use specified in the license contract.
You can get the latest version of this manual on the Internet at the Hirschmann product site (www.hirschmann.com).
Hirschmann Automation and Control GmbH
Stuttgarter Str. 45-51
72654 Neckartenzlingen
Germany

Contents
3
RM GUI GRS
Release
8.0 09/2019
Contents
Safety instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
About this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Key. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Notes on the Graphical User Interface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
1 Basic Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
1.1 System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
1.2 Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
1.3 Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
1.4 Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
1.5 Load/Save . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
1.6 External Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
1.7 Port. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
1.8 Restart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
2 Time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
2.1 Basic Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
2.2 SNTP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
2.2.1 SNTP Client . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
2.2.2 SNTP Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
3 Device Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
3.1 User Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
3.2 Authentication List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
3.3 Management Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
3.3.1 Server. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
3.3.2 IP Access Restriction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
3.3.3 Web . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
3.3.4 Command Line Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
3.3.5 SNMPv1/v2 Community . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
3.4 Pre-login Banner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
4 Network Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
4.1 Network Security Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
4.2 Port Security. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
4.3 802.1X Port Authentication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
4.3.1 802.1X Global . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
4.3.2 802.1X Port Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
4.3.3 802.1X Port Clients . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
4.3.4 802.1X EAPOL Port Statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
4.3.5 802.1X Port Authentication History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
4.3.6 802.1X Integrated Authentication Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
4.4 RADIUS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
4.4.1 RADIUS Global . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
4.4.2 RADIUS Authentication Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123

Contents
4RM GUI GRS
Release
8.0 09/2019
4.4.3 RADIUS Accounting Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
4.4.4 RADIUS Authentication Statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
4.4.5 RADIUS Accounting Statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
4.5 DoS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
4.5.1 DoS Global. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
4.6 ACL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
4.6.1 ACL IPv4 Rule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
4.6.2 ACL MAC Rule. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
4.6.3 ACL Assignment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
5 Switching . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146
5.1 Switching Global . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146
5.2 Rate Limiter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
5.3 Filter for MAC Addresses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
5.4 IGMP Snooping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
5.4.1 IGMP Snooping Global . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
5.4.2 IGMP Snooping Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157
5.4.3 IGMP Snooping Enhancements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161
5.4.4 IGMP Snooping Querier. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164
5.4.5 IGMP Snooping Multicasts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
5.5 MRP-IEEE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168
5.5.1 MRP-IEEE Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169
5.5.2 MRP-IEEE Multiple MAC Registration Protocol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170
5.5.3 MRP-IEEE Multiple VLAN Registration Protocol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174
5.6 GARP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 177
5.6.1 GMRP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178
5.6.2 GVRP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180
5.7 QoS/Priority . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181
5.7.1 QoS/Priority Global . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182
5.7.2 QoS/Priority Port Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183
5.7.3 802.1D/p Mapping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185
5.7.4 IP DSCP Mapping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187
5.7.5 Queue Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 189
5.8 VLAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190
5.8.1 VLAN Global . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191
5.8.2 VLAN Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192
5.8.3 VLAN Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194
5.8.4 VLAN Voice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196
5.9 L2-Redundancy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198
5.9.1 MRP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 199
5.9.2 Spanning Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 202
5.9.2.1 Spanning Tree Global . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 203
5.9.2.2 Spanning Tree Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
5.9.3 Link Aggregation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 216
5.9.4 Link Backup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 222
5.9.5 FuseNet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224
5.9.5.1 Sub Ring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 226

Contents
5
RM GUI GRS
Release
8.0 09/2019
6 Diagnostics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 232
6.1 Status Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 232
6.1.1 Device Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 233
6.1.2 Security Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 238
6.1.3 Signal Contact . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 244
6.1.3.1 Signal Contact 1 / Signal Contact 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 245
6.1.4 MAC Notification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 250
6.1.5 Alarms (Traps) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 252
6.2 System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 254
6.2.1 System Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 255
6.2.2 Hardware State . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 256
6.2.3 Configuration Check. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 257
6.2.4 IP Address Conflict Detection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 259
6.2.5 ARP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 263
6.2.6 Selftest . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 264
6.3 Syslog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 266
6.4 Ports. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 268
6.4.1 SFP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 269
6.4.2 TP cable diagnosis. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 271
6.4.3 Port Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 273
6.4.4 Auto-Disable. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 285
6.4.5 Port Mirroring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 289
6.5 LLDP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 291
6.5.1 LLDP Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 292
6.5.2 LLDP Topology Discovery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 296
6.6 Report . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 299
6.6.1 Report Global . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300
6.6.2 Persistent Logging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 304
6.6.3 System Log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 307
6.6.4 Audit Trail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 308
7 Advanced . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 310
7.1 DHCP L2 Relay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 310
7.1.1 DHCP L2 Relay Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 311
7.1.2 DHCP L2 Relay Statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314
7.2 DHCP Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 315
7.2.1 DHCP Server Global . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 316
7.2.2 DHCP Server Pool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 317
7.2.3 DHCP Server Lease Table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 321
7.3 Industrial Protocols. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 322
7.3.1 IEC61850-MMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 323
7.3.2 Modbus TCP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 326
7.4 Command Line Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 328
A Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 330
B Further support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 334
C Readers’ Comments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 335

Safety instructions
6RM GUI GRS
Release
8.0 09/2019
Safety instructions
WARNING
UNCONTROLLED MACHINE ACTIONS
To avoid uncontrolled machine actions caused by data loss, configure all the data transmission
devices individually.
Before you start any machine which is controlled via data transmission, be sure to complete the
configuration of all data transmission devices.
Failure to follow these instructions can result in death, serious injury, or equipment
damage.

About this Manual
8RM GUI GRS
Release
8.0 09/2019
About this Manual
The “Configuration” user manual contains the information you need to start operating the device. It
takes you step by step from the first startup operation through to the basic settings for operation in
your environment.
The “Installation” user manual contains a device description, safety instructions, a description of the
display, and the other information that you need to install the device.
The “Graphical User Interface” reference manual contains detailed information on using the
graphical user interface to operate the individual functions of the device.
The “Command Line Interface” reference manual contains detailed information on using the
Command Line Interface to operate the individual functions of the device.
The Industrial HiVision Network Management software provides you with additional options for
smooth configuration and monitoring:
Auto-topology discovery
Browser interface
Client/server structure
Event handling
Event log
Simultaneous configuration of multiple devices
Graphical user interface with network layout
SNMP/OPC gateway

Key
9
RM GUI GRS
Release
8.0 09/2019
Key
The designations used in this manual have the following meanings:
List
Work step
Link Cross-reference with link
Note: A note emphasizes a significant fact or draws your attention to a dependency.
Courier
Representation of a CLI command or field contents in the graphical user interface
Execution in the Graphical User Interface
Execution in the Command Line Interface

Notes on the Graphical User Interface
10 RM GUI GRS
Release
8.0 09/2019
Notes on the Graphical User Interface
The Graphical User Interface of the device is divided as follows:
Navigation area
Dialog area
Buttons
Navigation area
The Navigation area is located on the left side of the Graphical User Interface.
The Navigation area contains the following elements:
Toolbar
Filter
Menu
You have the option of collapsing the entire Navigation area, for example when displaying the
Graphical User Interface on small screens. To collapse or expand, you click the small arrow at the
top of the navigation area.
Toolbar
The toolbar at the top of the navigation area contains several buttons.
•When you position the mouse pointer over a button, a tooltip displays further information.
•If the connection to the device is lost, then the toolbar is grayed out.
The device automatically refreshes the toolbar information every 5 seconds.
Clicking the button refreshes the toolbar manually.
When you position the mouse pointer over the button, a tooltip displays the following information:
 User:
Name of the logged in user
 Device name:
Name of the device
Clicking the button opens the Device Security > User Management dialog.
When you position the mouse pointer over the button, a tooltip displays the summary of the
Diagnostics > System > Configuration Check dialog.
Clicking the button opens the Diagnostics > System > Configuration Check dialog.

Notes on the Graphical User Interface
11
RM GUI GRS
Release
8.0 09/2019
Clicking the button logs out the current user and displays the login page.
Displays the remaining time in seconds until the device automatically logs out an inactive user.
Clicking the button opens the
Device Security > Management Access > Web dialog. There you can
specify the timeout.
When the configuration profile in the volatile memory (
RAM ) differs from the "Selected" configuration
profile in the non-volatile memory ( NVM ), this button is visible. Otherwise, the button is hidden.
Clicking the button opens the Basic Settings > Load/Save dialog.
By right-clicking the button you can save the current settings in the non-volatile memory ( NVM ).
When you position the mouse pointer over the button, a tooltip displays the following information:
 Device Status: This section displays a compressed view of the Device status frame in the Basic
Settings > System dialog. The section displays the alarm that is currently active and whose
occurrence was recorded first.
 Security Status: This section displays a compressed view of the Security status frame in the Basic
Settings > System dialog. The section displays the alarm that is currently active and whose
occurrence was recorded first.
 Boot Parameter: If you permanently save changes to the settings and at least one boot
parameter differs from the configuration profile used during the last restart, then this section
displays a note.
The following settings cause the boot parameters to change:
– Basic Settings > External Memory dialog, Software auto update parameter
– Basic Settings > External Memory dialog, Config priority parameter
– Device Security > Management Access > Server dialog, SNMP tab, UDP port parameter
– Diagnostics > System > Selftest dialog, RAM test parameter
– Diagnostics > System > Selftest dialog, SysMon1 is available parameter
– Diagnostics > System > Selftest dialog, Load default config on error parameter
Clicking the button opens the Diagnostics > Status Configuration > Device Status dialog.
Filter
The filter enables you to reduce the number of menu items in the menu. When filtering, the menu
displays only menu items matching the search string entered in the filter field.

Notes on the Graphical User Interface
12 RM GUI GRS
Release
8.0 09/2019
Menu
The menu displays the menu items.
You have the option of filtering the menu items. See section “Filter”.
To display the corresponding dialog in the dialog area, you click the desired menu item. If the
selected menu item is a node containing sub-items, then the node expands or collapses while
clicking. The dialog area keeps the previously displayed dialog.
You have the option of expanding or collapsing every node in the menu at the same time. When
you right-click anywhere in the menu, a context menu displays the following entries:
 Expand
Expands every node in the menu at the same time. The menu displays the menu items for every
level.
 Collapse
Collapses every node in the menu at the same time. The menu displays the top level menu
items.
Dialog area
The Dialog area is located on the right side of the Graphical User Interface. When you click a menu
item in the Navigation area, the Dialog area displays the corresponding dialog.
Updating the display
If a dialog remains opened for a longer time, then the values in the device have possibly changed
in the meantime.
To update the display in the dialog, click the button. Unsaved information in the dialog is lost.
Saving the settings
To transfer the changed settings to the volatile memory ( RAM ) of the device, click the button.
To keep the changed settings, even after restarting the device, proceed as follows:
Open the Basic Settings > Load/Save dialog.
In the table, highlight the desired configuration profile.
When in the Selected column the checkbox is unmarked , click the button and then the
Select item.
Click the button and then the Save item.
Note: Unintentional changes to the settings can terminate the connection between your PC and the
device. To keep the device accessible, enable the Undo configuration modifications function in the
Basic Settings > Load/Save dialog, before changing any settings. Using the function, the device
continuously checks whether it can still be reached from the IP address of the user’s PC. If the
connection is lost, then the device loads the configuration profile saved in the non-volatile memory
( NVM ) after the specified time. Afterwards, the device can be accessed again.

Notes on the Graphical User Interface
13
RM GUI GRS
Release
8.0 09/2019
Working with tables
The dialogs display numerous settings in table form.
When you modify a table cell, the table cell displays a red mark in its top-left corner. The red mark
indicates that your modifications are not yet transfered to the volatile memory ( RAM ) of the device.
You have the option of customizing the look of the tables to fit your needs. When you position the
mouse pointer over a column header, the column header displays a drop-down list button. When
you click this button, the drop-down list displays the following entries:
Sort ascending
Sorts the table entries in ascending order based on the entries of the selected column.
You recognize sorted table entries by an arrow in the column header.
Sort descending
Sorts the table entries in descending order based on the entries of the selected column.
You recognize sorted table entries by an arrow in the column header.
Columns
Displays or hides columns.
You recognize hidden columns by an unmarked checkbox in the drop-down list.
Filters
The table only displays the entries whose content matches the specified filter criteria of the
selected column.
You recognize filtered table entries by an emphasized column header.
You have the option of selecting multiple table entries simultaneously and subsequently applying
an action to them. This is useful when you are going to remove multiple table entries at the same
time.
Select several consecutive table entries:
Click the first desired table entry to highlight it.
Press and hold the <SHIFT> key.
Click the last desired table entry to highlight every desired table entry.
Select multiple individual table entries:
Click the first desired table entry to highlight it.
Press and hold the <CTRL> key.
Click the next desired table entry to highlight it.
Repeat until every desired table entry is highlighted.
Buttons
Here you find the description of the standard buttons. The special dialog-specific buttons are
described in the corresponding dialog help text.
Transfers the changes to the volatile memory (
RAM ) of the device and applies them to the device.
To save the changes in the non-volatile memory, proceed as follows:
Open the Basic Settings > Load/Save dialog.
In the table, highlight the desired configuration profile.
When in the Selected column the checkbox is unmarked , click the button and then the Select
item.
Click the button to save your current changes.

Notes on the Graphical User Interface
14 RM GUI GRS
Release
8.0 09/2019
Updates the fields with the values that are saved in the volatile memory ( RAM ) of the device.
Transfers the settings from the volatile memory (
RAM ) into the configuration profile designated as
“Selected” in the non-volatile memory ( NVM ).
When in the Basic Settings > External Memory dialog the checkbox in the Backup config when saving
column is marked, then the device generates a copy of the configuration profile in the external
memory.
Displays a submenu with menu items corresponding to the respective dialog.
Opens the Wizard dialog.
Adds a new table entry.
Removes the highlighted table entry.
Opens the online help.

Basic Settings
[ Basic Settings > System ]
16 RM GUI GRS
Release
8.0 09/2019
1 Basic Settings
The menu contains the following dialogs:
System
Modules
Network
Software
Load/Save
External Memory
Port
Restart
1.1 System
[ Basic Settings > System ]
In this dialog, you monitor individual operating statuses.
Device status
The fields in this frame display the device status and inform you about alarms that have occurred.
When an alarm currently exists, the frame is highlighted.
You specify the parameters that the device monitors in the Diagnostics > Status Configuration > Device
Status dialog.
Note: If you connect only one power supply unit for the supply voltage to a device with a redundant
power supply unit, then the device reports an alarm. To help avoid this alarm, you deactivate the
monitoring of the missing power supply units in the Diagnostics > Status Configuration > Device Status
dialog.
Alarm counter
Displays the number of currently existing alarms.
When there is at least one currently existing alarm, the icon is visible.
When you position the mouse pointer over the icon, a tooltip displays the cause of the currently
existing alarms and the time at which the device triggered the alarm.
If a monitored parameter differs from the desired status, then the device triggers an alarm. The
Diagnostics > Status Configuration > Device Status dialog, Status tab displays an overview of the alarms.

Basic Settings
[ Basic Settings > System ]
17
RM GUI GRS
Release
8.0 09/2019
Security status
The fields in this frame display the security status and inform you about alarms that have occurred.
When an alarm currently exists, the frame is highlighted.
You specify the parameters that the device monitors in the Diagnostics > Status Configuration >
Security Status dialog.
Alarm counter
Displays the number of currently existing alarms.
When there is at least one currently existing alarm, the icon is visible.
When you position the mouse pointer over the icon, a tooltip displays the cause of the currently
existing alarms and the time at which the device triggered the alarm.
If a monitored parameter differs from the desired status, then the device triggers an alarm. The
Diagnostics > Status Configuration > Security Status dialog, Status tab displays an overview of the
alarms.
Signal contact status
The fields in this frame display the signal contact status and inform you about alarms that have
occurred. When an alarm currently exists, the frame is highlighted.
You specify the parameters that the device monitors in the Diagnostics > Status Configuration > Signal
Contact > Signal Contact 1 / Signal Contact 2 dialog.
Alarm counter
Displays the number of currently existing alarms.
When there is at least one currently existing alarm, the icon is visible.
When you position the mouse pointer over the icon, a tooltip displays the cause of the currently
existing alarms and the time at which the device triggered the alarm.
If a monitored parameter differs from the desired status, then the device triggers an alarm. The
Diagnostics > Status Configuration > Signal Contact > Signal Contact 1 / Signal Contact 2 dialog, Status tab
displays an overview of the alarms.
System data
The fields in this frame display operating data and information on the location of the device.
System name
Specifies the name for which the device is known in the network.

Basic Settings
[ Basic Settings > System ]
18 RM GUI GRS
Release
8.0 09/2019
Possible values:
Alphanumeric ASCII character string with 0..255 characters
The following characters are allowed:
– 0..9
– a..z
– A..Z
– !#$%&'()*+,-./:;<=>?@[\\]^_`{}~
– <device name>-<MAC address> (default setting)
When creating HTTPS X.509 certificates, the application generating the certificate uses the
specified value as the domain name and common name.
The following functions use the specified value as a host name or FQDN (Fully Qualified Domain
Name). For compatibility, it is recommended to use only small letters, since not every system
compares the case in the FQDN. Verify that this name is unique in the whole network.
DHCP client
 Syslog
 IEC61850-MMS
Location
Specifies the location of the device.
Possible values:
Alphanumeric ASCII character string with 0..255 characters
Contact person
Specifies the contact person for this device.
Possible values:
Alphanumeric ASCII character string with 0..255 characters
Device type
Displays the product name of the basic device.
Power supply 1
Power supply 2
Displays the status of the power supply unit on the relevant voltage supply connection.
Possible values:
 present
 defective
 not installed
 unknown
Uptime
Displays the time that has elapsed since this device was last restarted.
Possible values:
Time in the format day(s), ...h ...m ...s

Basic Settings
[ Basic Settings > System ]
19
RM GUI GRS
Release
8.0 09/2019
Temperature [°C]
Displays the current temperature in the device in °C.
You activate the monitoring of the temperature thresholds in the Diagnostics > Status Configuration >
Device Status dialog.
Upper temp. limit [°C]
Specifies the upper temperature threshold in °C.
The “Installation” user manual contains detailed information about setting the temperature
thresholds.
Possible values:
 -99..99 (integer)
If the temperature in the device exceeds this value, then the device generates an alarm.
Lower temp. limit [°C]
Specifies the lower temperature threshold in °C.
The “Installation” user manual contains detailed information about setting the temperature
thresholds.
Possible values:
 -99..99 (integer)
If the temperature in the device falls below this value, then the device generates an alarm.
LED status
This frame displays the states of the device status LEDs at the time of the last update. The
“Installation” user manual contains detailed information about the device status LEDs.
Parameters Color Meaning
Status There is currently no device status alarm. The device status is OK.
There is currently at least one device status alarm. Therefore, see the
Device status frame above.
Power Device variant with 2 power supply units:
Only one supply voltage is active.
Device variant with 1 power supply unit:
The supply voltage is active.
Device variant with 2 power supply units:
Both supply voltages are active.
RM The device is neither operating as a MRP ring manager nor as a DLR
supervisor.
Loss of redundancy reserve.
The device is operating as a MRP ring manager.
Redundancy reserve is available.
The device is operating as a
MRP ring manager.