Sindoh D310 Series User manual

USER MANUAL/About This Machine
Before using this Product, please read the
USER MANUAL carefully and keep it for
your reference.
D310 Series

[About This Machine] 1-1
Table of contents
1 Checking the Name and Function of each Part in this Machine
Front....................................................................................................................................................1-2
Side/rear..............................................................................................................................................1-3
Inside...................................................................................................................................................1-4
2 Checking the Status of This Machine Using LED Indicators
2.1 Warning Indicator............................................................................................................................ 2-2
2.2 Data Indicator.................................................................................................................................. 2-3
3 Checking the Name and Function of Each Optional Component
3.1 Checking the list of optional components.................................................................................... 3-2
List of optional components ...............................................................................................................3-2
List of other optional components ......................................................................................................3-4
Front....................................................................................................................................................3-6
Side/rear..............................................................................................................................................3-8
3.2 Finisher FS-533, Punch Kit PK-519 ............................................................................................... 3-9
3.3 Job Separator JS-506 ................................................................................................................... 3-10
3.4 Finisher FS-534/Saddle Stitcher SD-511/Punch Kit PK-520 ..................................................... 3-11
4 Checking the Specifications of This Machine
Main Unit.............................................................................................................................................4-2
Scanning Function Specifications ......................................................................................................4-3
Printer Specifications ..........................................................................................................................4-4
5 Checking the Specifications of Optional Components
Fax Kit FK-513 ....................................................................................................................................5-2
Reverse Automatic Document Feeder DF-628...................................................................................5-2
Paper Feed Cabinet PC-114...............................................................................................................5-3
Paper Feed Cabinet PC-214...............................................................................................................5-3
Paper Feed Cabinet PC-414...............................................................................................................5-4
Finisher FS-534...................................................................................................................................5-4
Saddle Stitcher SD-511 ......................................................................................................................5-6
Punch Kit PK-520 ...............................................................................................................................5-6
Finisher FS-533...................................................................................................................................5-6
Punch Kit PK-519 ...............................................................................................................................5-7
Job Separator JS-506.........................................................................................................................5-8
Authentication Unit AU-102 ................................................................................................................5-8
Authentication Unit AU-201S..............................................................................................................5-9
Upgrade Kit UK-212 .........................................................................................................................5-10
6 Using the Authentication Unit (Biometric Type)
6.1 Authentication Unit (Biometric Type) ............................................................................................ 6-2
6.2 Status of Authentication Unit......................................................................................................... 6-3
6.3 Operations Required to Use This Function (for the Administrator) ........................................... 6-4
6.3.1 Configuring Authentication Settings of This Machine.........................................................................6-4
6.3.2 Registering User Authentication Information ......................................................................................6-5
6.4 Logging in to This Machine............................................................................................................ 6-8
6.5 Using Data Administrator (for the Administrator) ........................................................................ 6-9
6.5.1 Data Administrator ..............................................................................................................................6-9
6.5.2 Setting Up the Operating Environment...............................................................................................6-9

[About This Machine] 1-2
Installing BioDriver (USB-Driver) (Windows 7/8.1/10).........................................................................6-9
Installing BioDriver (USB-Driver) (Windows Vista) ............................................................................6-11
Installing
Data Administrator PlugIn for Biometric Authentication Unit AU-102 ..............................................6-12
6.5.3 Registering User Authentication Information ....................................................................................6-13
7UsingtheAuthentication Unit (IC Card Type)
7.1 Authentication Unit (IC card type) ................................................................................................. 7-2
7.2 Status of authentication unit.......................................................................................................... 7-3
7.3 Operations Required to Use This Function (for the Administrator) ........................................... 7-4
7.3.1 Configuring Authentication Settings of This Machine.........................................................................7-4
7.3.2 Registering User Authentication Information ......................................................................................7-6
7.4 Logging in to This Machine............................................................................................................ 7-7
7.5 Using Data Administrator (for the Administrator)........................................................................ 7-8
7.5.1 Data Administrator ..............................................................................................................................7-8
7.5.2 Setting up the Operating Environment ...............................................................................................7-8
Installing IC CardDriver (USB-Driver) (Windows 7/8.1/10)..................................................................7-8
Installing IC CardDriver (USB-Driver) (Windows Vista) .....................................................................7-10
Installing Data Administrator PlugIn for IC Card Authentication Unit
AU-201S............................................................................................................................................7-11
7.5.3 Registering user Authentication Information.....................................................................................7-12

1Checking the Name and
Function of each Part in this
Machine

1
[About This Machine] 1-2
1 Checking the Name and Function of each Part in
this Machine
Front
No. Name Description
1Control Panel Used to configure various settings in this machine.
2USB Port (Type A)
USB2.0/1.1
Used to connect an external memory unit (USB memory unit) to this
machine.
3Right Door Open this door to clear a paper jam.
4Main Power Switch Press this switch to turn the machine on or off.
5Right Door Release
Lever
Used to lock the Right Door.
6Bypass Tray Used to print data on irregularly size paper, thick paper, transparen-
cies, postcards (4 e 6 (A6 Card)), envelopes, or label sheets.
The Bypass Tray can hold up to 100 sheets of plain paper, 20 sheets
of Thick 1, 20 sheets of Thick 1+, 20 sheets of Thick 2, 20 sheets of
Thick 3, 20 transparencies, 10 envelopes, 20 postcards (4 e 6 (A6
Card)), label sheets, or index paper, and 1 banner paper of sheet.
7Tray1, Tray2 Allows you to load up to 500 sheets.
These trays can hold up to 150 sheets respectively of Thick 1, Thick
1+, Thick 2, and Thick 3.
8Front Door Open this door to replace the Toner Cartridge, Waste Toner Box, or
Drum Unit.
9Data Indicator Flashes or lights up to indicate the data receiving status on this ma-
chine.
For details, refer to page 2-3.
10 Output Tray Outputs printed pages.
1
2
3
4
6
5
7
10
13
11
8
9
12
1
[About This Machine] 1-2
1 Checking the Name and Function of each Part in
this Machine
Front
No. Name Description
1Control Panel Used to configure various settings in this machine.
2USB Port (Type A)
USB2.0/1.1
Used to connect an external memory unit (USB memory unit) to this
machine.
3Right Door Open this door to clear a paper jam.
4Main Power Switch Press this switch to turn the machine on or off.
5Right Door Release
Lever
Used to lock the Right Door.
6Bypass Tray Used to print data on irregularly size paper, thick paper, transparen-
cies, postcards (4 e 6 (A6 Card)), envelopes, or label sheets.
The Bypass Tray can hold up to 100 sheets of plain paper, 20 sheets
of Thick 1, 20 sheets of Thick 1+, 20 sheets of Thick 2, 20 sheets of
Thick 3, 20 transparencies, 10 envelopes, 20 postcards (4 e 6 (A6
Card)), label sheets, or index paper, and 1 banner paper of sheet.
7Tray1, Tray2 Allows you to load up to 500 sheets.
These trays can hold up to 150 sheets respectively of Thick 1, Thick
1+, Thick 2, and Thick 3.
8Front Door Open this door to replace the Toner Cartridge, Waste Toner Box, or
Drum Unit.
9Data Indicator Flashes or lights up to indicate the data receiving status on this ma-
chine.
For details, refer to page 2-3.
10 Output Tray Outputs printed pages.
1
2
3
4
6
5
7
10
13
11
8
9
12
1
2
3
4
6
5
7
10
13
11
8
9
12

[About This Machine] 1-3
1
Side/rear
11 Power key Press this key to switch to the Power Save mode.
During the normal operation, the key lights up blue. During the power
save mode, the key flashes blue or lights up orange.
12 Stylus Pen Used to select a menu on the Touch Panel, or enter characters.
13 Warning Indicator Flashes or lights up to indicate that a problem has occurred in this ma-
chine.
For details, refer to page 2-2.
No. Name Description
No. Name Description
1Power Cord Used to supply power to this machine.
2USB Port (Type B)
USB2.0/1.1
Connect to this port when using this machine as a USB-connected
printer.
3Network Connector
(10Base-T/100Base-
TX/1000Base-T)
Connect to this port when using this machine as a network printer or
network scanner.
3
2
1

1
[About This Machine] 1-4
Inside
No. Name Description
1Original Glass Used to load the original.
2Fusing Adjustment
Lever
Used to clear paper jams in the fusing unit when printing envelopes.
3Fusing Unit Used to fuse toner to paper using heat and pressure.
4Transfer Unit Used to transcribe toner onto paper.
5Drum Unit Used to create a print image.
6Lock Release Tab Used to remove the Drum Unit. (Black only)
7Waste Toner Box Used to collect used waste toners.
8Printhead Cleaner Used to clean the surface of the Print Head Glass when the Drum
Unit is being replaced.
9Toner Cartridge Contains toner, with which a print image is created.
10 Slit Scan Glass Used to scan an original image when using the ADF.
11 Original Scale Load the original along this scale. This scale is also used to check the
size of the loaded original.
1
3
2
4
5
6
8
7
9
11
12
10
1
[About This Machine] 1-4
Inside
No. Name Description
1Original Glass Used to load the original.
2Fusing Adjustment
Lever
Used to clear paper jams in the fusing unit when printing envelopes.
3Fusing Unit Used to fuse toner to paper using heat and pressure.
4Transfer Unit Used to transcribe toner onto paper.
5Drum Unit Used to create a print image.
6Lock Release Tab Used to remove the Drum Unit. (Black only)
7Waste Toner Box Used to collect used waste toners.
8Printhead Cleaner Used to clean the surface of the Print Head Glass when the Drum
Unit is being replaced.
9Toner Cartridge Contains toner, with which a print image is created.
10 Slit Scan Glass Used to scan an original image when using the ADF.
11 Original Scale Load the original along this scale. This scale is also used to check the
size of the loaded original.
1
3
2
4
5
6
8
7
9
11
12
10

2Checking the Status of This
Machine Using LED
Indicators

2.1 Warning Indicator
2
[About This Machine] 2-2
2 Checking the Status of This Machine Using LED In-
dicators
2.1 Warning Indicator
Flashes or lights up to indicate that a problem has occurred in this machine.
Status of LED Status of this machine
Flash: Orange Indicates that a warning has occurred in this machine.
Light up: Orange Indicates that this machine is stopped due to an error.

[About This Machine] 2-3
2.2 Data Indicator
2
2.2 Data Indicator
Flashes or lights up to indicate the data receiving status on this machine.
Status of LED Status of this machine
Flash: Blue Indicates that print data is currently being received.
Light up: Blue Indicates that data is currently being stored.

2.2 Data Indicator
2
[About This Machine] 2-4

3Checking the Name and
Function of Each Optional
Component

3.1 Checking the list of optional components
3
[About This Machine] 3-2
3 Checking the Name and Function of Each Optional
Component
3.1 Checking the list of optional components
List of optional components
1
32
4
20
17
16
22
23
1415 12
24
18 19
21
13
78
9
10
5
6
11
3.1 Checking the list of optional components
3
[About This Machine] 3-2
3 Checking the Name and Function of Each Optional
Component
3.1 Checking the list of optional components
List of optional components
1
32
4
20
17
16
22
23
1415 12
24
18 19
21
13
78
9
10
5
6
11

[About This Machine] 3-3
3.1 Checking the list of optional components
3
No. Name Description
1 Main unit Scans the original in the scanner section, and prints a scanned image
in the printer section.
This unit is referred to as "machine", "main unit", or "C287/C227" in
the manual.
2Original Cover OC-
514
Used to fix the loaded originals.
This is referred to as Original Cover in the manual.
3Reverse Automatic
Document Feeder DF-
628
Automatically feeds and scans originals by page. This unit also revers-
es and automatically scans 2-sided originals.
This unit is referred to as ADF in the manual.
4FAX Kit FK-513 Used to operate this machine as a fax machine.
The Hard Disk is optional in some areas. When you use this machine
as a fax machine, the optional Hard Disk must also be installed in this
machine.
5Clean Unit CU-101 Collects small particles (UFP) generated in this machine to prevent
them from escaping this machine.
The Mount Kit MK-748 is required to install Clean Unit CU-101.
6Mount Kit MK-748 This unit is required to install Clean Unit CU-101.
7Authentication Unit
AU-102
Performs user authentication by scanning vein patterns in the finger.
To install the Authentication Unit AU-102, the Local Interface Kit
EK-608 or Local Interface Kit EK-609 is required in addition to the
Working Table WT-506.
This unit is referred to as an Authentication Unit in the manual.
8Authentication Unit
AU-201S
Performs user authentication by scanning information recorded on
the IC card or NFC-compatible Android terminal.
To install the Authentication Unit AU-201S, the Local Interface Kit
EK-608 or Local Interface Kit EK-609 is required in addition to the
Mount Kit MK-735.
This unit can also be installed on the Working Table WT-506.
This unit is referred to as an Authentication Unit in the manual.
9Working Table WT-
506
Provides an area to temporarily place an original or other materials.
This is also used when the Authentication Unit AU-102 or Authenti-
cation Unit AU-201S is installed.
10 Keypad KP-101 It is equipped on the side of the Control Panel.
Allows you to enter numbers by using the Hardware Keypad.
11 Keyboard Holder KH-
102
Install this holder to use a external keyboard.
For details on external keyboards, contact your service representa-
tive.
12 Desk DK-514 Used to install this machine on the floor.
This unit is referred to as Desk in the manual.
13 Paper Feed Cabinet
PC-414
Allows you to load up to 2500 sheets of 8-1/2 e 11 (A4) size.
This unit is referred to as LCT (built-in) in the manual.
14 Paper Feed Cabinet
PC-214
Allows you to load up to 500 sheets respectively in the top and bottom
trays.
This unit is referred to as Double Paper Feed Cabinet in the manual.
15 Paper Feed Cabinet
PC-114
Allows you to load up to 500 sheets in the top tray and use the bottom
tray as a storage box.
This unit is referred to as Single Paper Feed Cabinet in the manual.
16 Finisher FS-534 Sorts, groups and staples printed paper before outputting it.
To install the Finisher FS-534, the Relay Unit RU-514 and Mount Kit
MK-603 are required. Also, Desk DK-514, Paper Feed Cabinet PC-
414, Paper Feed Cabinet PC-114, or Paper Feed Cabinet PC-214
must be installed on this machine.
17 Saddle Stitcher SD-
511
Install this unit onto Finisher FS-534. This unit supports the
fold/center staple function.
It is referred to as Saddle Stitcher in the manual.
18 Punch Kit PK-520 Install this unit onto Finisher FS-534.
This unit supports the punching function.
19 Relay Unit RU-514 This unit is required to install Finisher FS-534.
"D311/D310" in

3.1 Checking the list of optional components
3
[About This Machine] 3-4
List of other optional components
The following options are built into this machine and are not shown in the figure.
20 Finisher FS-533 Install this unit onto the output tray of this machine.
The Mount Kit MK-602 and Mount Kit MK-603 are required to install
Finisher FS-533.
Sorts, groups and staples printed paper before outputting it.
21 Mount Kit MK-602 This unit is required to install Finisher FS-533.
22 Punch Kit PK-519 Install this unit onto Finisher FS-533.
This unit supports the punching function.
23 Job Separator JS-506 Install this unit onto the output tray of this machine.
This unit sorts printed sheets.
The Mount Kit MK-603 is required to install Job Separator JS-506.
This unit is referred to as Job Separator in the manual.
24 Mount Kit MK-603 This unit is required when the Finisher FS-534, Finisher FS-533, or
Job Separator JS-506 is installed on this machine.
No. Name Description
No. Name Description
1Stamp Unit SP-501 Stamps a scanned original when sending a fax. This unit allows you
to check that the original has been scanned.
2Spare TX Marker
Stamp 2
A replacement stamp for the Stamp Unit SP-501.
3Local Interface Kit
EK-608
Install this unit when using the voice guidance function, Authentica-
tion Unit AU-102, Authentication Unit AU-201S, or Upgrade Kit
UK-212.
The speaker and USB port are added.
This unit is referred to as the Local Interface Kit in the manual.
4Local Interface Kit
EK-609
Install this unit when using the voice guidance function, Authentica-
tion Unit AU-102, Authentication Unit AU-201S, Upgrade Kit UK-
212, or the connection function with a Bluetooth LE-compatible iOS
terminal.
The speaker, USB port, and receiving device for Bluetooth LE com-
munication are added.
This unit is referred to as Local Interface Kit or Local Interface Kit
(voice guidance / Bluetooth LE compatible).
• For details on the association with an iOS terminal, refer to "User's
Guide[Web Management Tool]/[Associating with External Applica-
tion]".
• For details on user authentication of an iOS terminal, refer to "Us-
er's Guide[Web Management Tool]/[Restricting Users from Using
this Device]".
5i-Option LK-102 v3 Supports the PDF processing function that is one of the advanced
functions.
6i-Option LK-104 v3 Supports the voice guidance function that is one of the advanced
functions.
7i-Option LK-105 v4 Supports the searchable PDF function that is one of the advanced
functions.
8i-Option LK-106 Used to add a bar code font that is one of special fonts.
9i-Option LK-107 Used to add a unicode font that is one of special fonts.
10 i-Option LK-108 Used to add an OCR font that is one of special fonts.
In the standard, the OCR-B font (PostScript) is available. Installing the
i-Option LK-108 allows use of the OCR-A font (PCL).
11 i-Option LK-110 v2 Used to add an advanced function that converts a file into the DOCX
or XLSX type or generates highly-functional and high-quality data.
i-Option LK-110 v2 includes the function licenses for i-Option LK-
102 v3 and LK-105 v4. If you purchase i-Option LK-110 v2, you do
not need to purchase i-Option LK-102 v3 or LK-105 v4.
For details about functions able to be added, refer to "User's
Guide[Advanced Function Operations]/[Advanced Functions]".

[About This Machine] 3-5
3.1 Checking the list of optional components
3
12 i-Option LK-111 Supports the ThinPrint function that is one of the advanced functions.
13 i-Option LK-114 Supports the serverless pull printing function that is one of the ad-
vanced functions.
14 i-Option LK-115 v2 You can use TPM (Trusted Platform Module) that is one of the ad-
vanced functions. Security enhancement is realized by encrypting
confidential information such as certificates and passwords of this
machine.
15 Upgrade Kit UK-211 • Install this unit when using i-Option LK-102 v3, LK-104 v3, LK-
105 v4, LK-106, LK-107, LK-108, LK-110 v2, or LK-114.
• Install this unit when using My Address in association with My
Panel Manager.
This unit is referred to as Extension Memory in the manual.
The Hard Disk is optional in some areas. When installing the optional
Extension Memory, the optional Hard Disk must also be installed in
this machine.
16 Upgrade Kit UK-212 Allows you to use this machine in a wireless network environment.
To install the Upgrade Kit UK-212, the Local Interface Kit EK-608
or Local Interface Kit EK-609 is required.
This unit is referred to as the Wireless LAN Interface Kit in the man-
ual.
17 Heater HT-509 Prevents paper in a paper tray from being affected by humidity.
The Heater HT-509 can be mounted when you purchase the Paper
Feed Cabinet PC-114, Paper Feed Cabinet PC-214, Paper Feed
Cabinet PC-414, or Desk DK-514.
18 Power Supply BOX
MK-734
Turns on/off the Heater HT-509 operations.
The Power Supply BOX MK-734 can be mounted when you pur-
chase the Paper Feed Cabinet PC-114, Paper Feed Cabinet PC-
214, Paper Feed Cabinet PC-414, or Desk DK-514.
19 Mount Kit MK-735 Required to have Authentication Unit AU-201S built in to the main
unit.
20 Hard Disk HD-522 Used to increase the hard disk storage capacity to add functions.
The hard disk is installed as the standard in North America and Eu-
rope.
No. Name Description

3.1 Checking the list of optional components
3
[About This Machine] 3-6
Front
The illustration shows the main unit with Reverse Automatic Document Feeder DF-628, and Paper Feed
Cabinet PC-414.
No. Name Description
1Original Pad Fixes the loaded originals.
2LCT (built-in) Allows you to load up to 2500 sheets.
This tray can hold up to 1000 sheets of Thick 1, Thick 1+, Thick 2, and
Thick 3.
3 Jam Removal Dial Turn this dial to remove paper that caused a paper jam in the ADF.
1
2
3
3.1 Checking the list of optional components
3
[About This Machine] 3-6
Front
The illustration shows the main unit with Reverse Automatic Document Feeder DF-628, and Paper Feed
Cabinet PC-414.
No. Name Description
1Original Pad Fixes the loaded originals.
2LCT (built-in) Allows you to load up to 2500 sheets.
This tray can hold up to 1000 sheets of Thick 1, Thick 1+, Thick 2, and
Thick 3.
3 Jam Removal Dial Turn this dial to remove paper that caused a paper jam in the ADF.
1
2
3

[About This Machine] 3-7
3.1 Checking the list of optional components
3
The illustration shows the main unit with Paper Feed Cabinet PC-214 or Paper Feed Cabinet PC-114, and
Reverse Automatic Document Feeder DF-628.
No. Name Description
4Left Cover Release
Lever
Used to open the Left Cover.
5Left Cover Open the Left Cover when clearing a paper jam.
6Lateral Guide Adjust this guide along the width of the original.
7Original Tray Load the original face up in this tray.
8Original Output Tray The scanned original is fed out onto this tray.
9Bottom Right Door Open this door when clearing a paper jam in the Tray3 or Tray4 trans-
port unit.
10 Bottom Right Door
Release Lever
Used to lock the Bottom Right Door.
11 Tray3 Allows you to load up to 500 sheets.
This tray can hold up to 150 sheets of Thick 1, Thick 1+, Thick 2, and
Thick 3.
12 Tray4/Storage Box Used as a Storage Box when installing Single Paper Feed Cabinet.
This box allows you to load up to 500 sheets when Double Paper
Feed Cabinet is installed.
This tray can hold up to 150 sheets of Thick 1, Thick 1+, Thick 2, and
Thick 3.
4
567
8
9
10
11
12
[About This Machine] 3-7
3.1 Checking the list of optional components
3
The illustration shows the main unit with Paper Feed Cabinet PC-214 or Paper Feed Cabinet PC-114, and
Reverse Automatic Document Feeder DF-628.
No. Name Description
4Left Cover Release
Lever
Used to open the Left Cover.
5Left Cover Open the Left Cover when clearing a paper jam.
6Lateral Guide Adjust this guide along the width of the original.
7Original Tray Load the original face up in this tray.
8Original Output Tray The scanned original is fed out onto this tray.
9Bottom Right Door Open this door when clearing a paper jam in the Tray3 or Tray4 trans-
port unit.
10 Bottom Right Door
Release Lever
Used to lock the Bottom Right Door.
11 Tray3 Allows you to load up to 500 sheets.
This tray can hold up to 150 sheets of Thick 1, Thick 1+, Thick 2, and
Thick 3.
12 Tray4/Storage Box Used as a Storage Box when installing Single Paper Feed Cabinet.
This box allows you to load up to 500 sheets when Double Paper
Feed Cabinet is installed.
This tray can hold up to 150 sheets of Thick 1, Thick 1+, Thick 2, and
Thick 3.
4
567
8
9
10
11
12

3.1 Checking the list of optional components
3
[About This Machine] 3-8
Side/rear
The illustration shows the main unit with Reverse Automatic Document Feeder DF-628, Paper Feed Cab-
inet PC-214, Fax Kit FK-513, Power Supply BOX MK-734, Clean Unit CU-101, and Mount Kit MK-748.
No. Name Description
1Jack for connecting a
telephone (TEL PORT)
Used to connect a telephone cord.
2Telephone Jack 1
(LINE PORT)
Used to connect a general telephone subscriber line.
3Heater Power Switch Used to turn Heater operations on or off. This function prevents paper
from being affected by humidity when the power is turned on.
The dehumidifier Heater is available when you purchase Single/Dou-
ble Paper Feed Cabinet, LCT (built-in), or Desk.
TEL
LINE
2
1
3

[About This Machine] 3-9
3.2 Finisher FS-533, Punch Kit PK-519
3
3.2 Finisher FS-533, Punch Kit PK-519
No. Name Description
1Jam Removal Dial
[FS1]
Turn this dial to remove paper that caused a paper jam in the finisher.
2Punch Kit Release Le-
ver [FS2]
Used to open the punch kit when removing a punch scrap box.
3Punch Kit You can punch printed sheets for filing by installing the Punch Kit in
the finisher.
4Staple Cartridge Pull out this cartridge from the finisher when clearing a staple jam or
replacing a staple cartridge.
5Lock Release Lever Used to release and move the finisher and main unit when clearing a
paper jam.
6Output Tray Outputs printed pages.
7Tray Extension Pull this tray out when handling paper longer than 8-1/2 e 11 (A4) w.
1 2
3
45
7
6
[About This Machine] 3-9
3.2 Finisher FS-533, Punch Kit PK-519
3
3.2 Finisher FS-533, Punch Kit PK-519
No. Name Description
1Jam Removal Dial
[FS1]
Turn this dial to remove paper that caused a paper jam in the finisher.
2Punch Kit Release Le-
ver [FS2]
Used to open the punch kit when removing a punch scrap box.
3Punch Kit You can punch printed sheets for filing by installing the Punch Kit in
the finisher.
4Staple Cartridge Pull out this cartridge from the finisher when clearing a staple jam or
replacing a staple cartridge.
5Lock Release Lever Used to release and move the finisher and main unit when clearing a
paper jam.
6Output Tray Outputs printed pages.
7Tray Extension Pull this tray out when handling paper longer than 8-1/2 e 11 (A4) w.
1 2
3
45
7
6