Sinoartizan ST-33BC User manual

INSTRUCTION MANUAL
MODEL:
ST-33BC/ST-33S
ST-54BC/ST-54D
1

2
Dear Users：
Thanks for choosing our wine coolers. You will enjoy
our kind, prompt and considerate service after you
buy our products. This manual would apply to various
models of our wine coolers. The model you choose
may have a little difference from the description in this
manual, but please don’t worry about，it will still useful
for you. In order to make it easy for your using, please
read this manual carefully and do as the manual
guidance. You will be satisfied with it. In addition, we
sincerely hope that you will enjoy using our wine
coolers.

18
Company name:
GuangDong Sinoartizan ElectricAppliance Co.,Ltd.
Add.:
Room 901-4,Building No.1,Gaojun Science And Technology Innovation
Center, Chaogui South Road ，Ronggui Xiaohuangpu Residential
Committee, Shunde District,Foshan City
Contact person: Ms.Julia Xie
Cellphone: [phone]
E-mail: [email protected]
Website: http://www.sinoartizan.com
3
Catalogue
Notes -------------------------------------------------------------------- 4
Structure of Wine Coolers------------------------------------------- 6
Installation ---------------------------------------------------------------10
Operation Instruction --------------------------------------------------11
Care and Maintenance ------------------------------------------------14
Troubleshooting ---------------------------------------------------------15
Technical Parameters -------------------------------------------------17

4
1. Important Safety Notes:
aWarningsa
To reduce the risk of fire, electrical shock, or injury when
using your appliance, follow these basic precautions:
zRead all instructions before using the Wine cooler.
zDo keep the children away from the wine cooler. Never allow children to
operate, play with, or crawl inside the appliance.
zNever clean appliance parts with flammable fluids. The fumes can create a
fire hazard or explosion.
zWhile wine cooler stops working, please call our after-sell service
department or other related technicians to check and repair. Never do it by
yourself in case of accident.
zOnce the power cord is damaged, find a professional technician or
electrician to change a new one. Never do it by yourself or continue to use
so as to avoid danger.
zDo make sure that the plug is pulled while cleaning, moving or repairing.
zKeep ventilation openings,in the appliance enclosure clear of obstruction.
zDo not use mechanical devices or other means to accelerate the defrosting
process,other than those recommended by the manufacturer.
zDo not damage the refrigerant circuit.
zDo not use electrical appliances inside the food storage compartments of
the appliance,unless they are of the type recommended by the
manufacturer.
-Save these instructions-
aNotesa
•In order to avoid damage of door seal, please make sure the door totally opened while
pulling out the movable shelves.
•Place the cooler closed to power socket.
•Once the cooler is stored with wines, please do not move it again.
•Make sure the cooler placed in proper place in order to avoid that the compressor in the
17
7. Data Parameters
Model ST-33S ST-33BC ST-54BC ST-54D
Climate Type N
Volume(L) 80 80 154 154
Bottles Capacity 33 76 154 44
Rated current(A) AC110-120V,60Hz
1.1A 1.1A 1.1A 1.1A
Rated power(W) 90W 90W 100W 100W
Sound (db) 42 42 43 43
Net Weight (LBS) 80 80 108 121

16
Turn on and off frequently. The room temperature is hotter than normal.
A large amount of contents has been added to the
Wine Cooler.
The door is opened too often.
The door is not closed completely.
The temperature control is not set correctly.
The door gasket does not seal properly.
The light does not work. Not plugged in.
The circuit breaker tripped or a blown fuse.
The bulb has burned out.
The light button is “OFF”.
Vibrations. Check to assure that the Wine Cooler is on level.
The Wine Cooler seems to make too much
noise.
The ratting noise may come from the flow of the
refrigerator, which is normal.
As each cycle ends, you may hear gurgling sounds
caused by the flow of refrigerator in your Wine
Cooler.
Contraction and expansion of the inside walls may
cause popping and crackling noises.
The Wine Cooler is not on level.
The door will not close properly. The Wine Cooler is not on level.
The door was reversed and not properly installed.
The gasket is dirty.
The shelves are out of position.
Notes: The replacement of LED light must need the qualified technician. First to
unscrew the 2 screws on the light cover, then take out the screw on the LED
panel, and replace LED light of same specification.
5
back could be easily touched.
•Do not start the wine cooler too frequently. The interval should be at least 5 minutes.
•Before you throw away your old wine cooler: Take off the door. Leave the shelves in
original place so that children may not easily climb inside.
•If the wine cooler with R600a, Flammable and explosive articles should not be put in or
near the cabinet, to avoid the fire or explosion.
•This appliance can be used by children aged from 8 years and above and persons witj
reduced physical,sensory or mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning use of the appliance in a safe
way and understand the hazards involved .
•Children shall not play with the appliance.Cleaning and user maintenance shall not be
made by children without supervision.
•If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
•Please keep this Use Manual carefully, if you lost the Use Manual,
please go to website: www.sinoartizan.com and download it
accordingly
•The instructions shall include the substance of the following: This
appliance is intended to be used in household and similar applications
such as .
– staff kitchen areas in shops, offices and other working environments;
– farm houses and by clients in hotels, motels and other residential
type environments;
– bed and breakfast type environments;
– catering and similar non-retail applications.
•Parameters and appearance of the product may be different from the manual, does not
affect the normal use of the product.

zRemove all items.
2. Structure of Wine Coolers zSecurely tape down all loose items (shelves) inside your appliance.
zTurn the adjustable leg up to the base to avoid damage.
1.ST-33S series structure diagram：
zMake the door shut.
zBe sure the appliance stays secure in the upright position during
transportation.
Also protect outside of appliance with a blanket, or similar item.
Energy saving Tips
zThe Wine Cooler should be located in the coolest area of the room, away from
heat producing appliances, and out of the direct sunlight
6. Troubleshooting
You can solve many common wine cooler problems easily, saving you the cost of a
possible service call. Try the suggestions below to see if you can solve the problem
before calling the service.
TROUBLESHOOTING GUIDE
(a) PROBLEM (b) POSSIBLE CAUSE
Wine Cooler does not operate. Not plugged in.
The appliance is turned off.
The circuit breaker tripped or a blown fuse.
Wine Cooler is not cold enough. Check the temperature control setting.
External environment may require a higher setting.
The door is opened too often.
The door is not closed completely.
The door gasket does not seal properly.
(1) Control panel (2) Full wooden shelf (3) Small wooden shelf
(4) Latch hook (5) The front vent (6) Upper hinge
(7) Glass door (8) Door handle (9) Lower hinge
6 15

The wines are kindly advised to layout equally. 2.ST-54D series structure diagram：
The best temperature for red wines is 11-18℃；For white wines is 6-12℃；
The temperature range of our wine coolers could set between 5-22 .℃
5. Care and Maintenance
14
Cleaning Your Wine Cooler
zWash the inside surfaces with warm water and baking soda solution. The
solution should be about 2 tablespoons of baking soda with a quart of water.
zWash the shelves with a mild detergent solution.
zTurn off the power, unplug the appliance, and remove all items including
shelves and rack.
zWring excess water out of the sponge or cloth when cleaning area of the
controls, or any electrical parts.
zWash the outside cabinet with warm water and mild liquid detergent. Rinse well
and wipe dry with a clean soft cloth.
¾Power Failure
zMost power failures are corrected within a few hours and will not affect the
temperature of your appliance if you minimize the number of times the door is
opened. If the power is going to be off for a longer period of time, you need to
take the proper steps to protect your contents.
(1) Control panel (2) Full wooden shelf (3) Compartment divider
(4) Full wooden shelf (5) Small wooden shelf (6) Latch hook
(7) The front vent (8) Feet (9) Upper hinge (10)Glass door
¾Vacancy time (11) Door handle (12)Lower hinge
zShort vacancy: Leave the Wine Cooler stopping working for around three
weeks.
zLong vacancy: If the appliance will not be used for several months, remove all
items and turn off the appliance. Clean and dry the interior thoroughly so as to
restraint odors and mould. Leave the door open slightly all the time if
necessary.
¾Moving Your Wine Cooler 7

◎ Shelf Change
3.ST-33BC series structure diagram：Do as the following shows if needing to pull out or change the shelves;
8
Firstly take out all the wines from the shelves and pull shelf out to the limit. Then
press down the left limit of sliding rail and meanwhile press up the right one, pull the
shelves out at this time. It could be easily pulled out if doing the three steps (Press
down left limit, press up the right one and puling out) at the same time.
◎ Placement and storage of wines
Several common layouts of wines:
(1) Control panel (2)Glass shelf (3) Wire basket
(4) Lock hook (5) The front vent (6) Feet (7) Upper hinge
(8) Glass door (9) Handle (10) Lower hinge 
Your cabinet was designed to store a maximum number of bottles in total security.
13

◎ Display Windows 4. ST-54BC series structure diagram：
· RUN light：Indicator light of compressor working. While the compressor operating,
the red light is on. While it stops operating, the red light is off.
12
·UPPER CHAMBER：Display of the actual temperature of the upper chamber. The
range is 0℃~37℃or 32℉~99℉.
·LOWER CHAMBER：Display of the actual temperature of the lower chamber; The
range is 0℃~37℃or 32℉~99℉.
· ℃/℉light：When the ℃light is on, it indicates Celsius temperature; When the
℉light is on, it indicates Fahrenheit temperature.
◎ Button Operation
• SET Button of the upper chamber：Temperature setting button; Once you press
the button, the temperature increase 1℃or 1℉. Setting range is between
5℃~12℃or 41℉~54℉.
• SET Button of the lower chamber：Temperature setting button; Once you press
the button, the temperature increase 1℃or 1℉. Setting range is between
12℃~22℃or 54℉~72℉.
• LIGHT Button：Cabinet light control button; Note: Once the light is turned on, it will
automatically off after 10 minutes all out of protecting the wines inside.
• ℃/℉Button：Celsius and Fahrenheit conversion button;
• ON/OFF button：Power on and off button; Press the button, it starts; press it again.
9
(1) Control panel (2) Wire shelf (3) Glass shelf
(4) Lock hook (5) The front vent (6) Feet (7) Upper hinge
(8) Glass door (9) Handle (10) Lower hinge

10
3.Installation
¾Before Using Your Wine Cooler
zRemove the exterior and interior packing.
zBefore connecting the Wine Cooler to the power source, let it stand
upright for approximately 2 hours. This will reduce the possibility of a
malfunction in the cooling system from handling during transportation.
zClean the interior surface with lukewarm water with a soft cloth.
zThe cooler is specially designed for wine storage, please do not put in
other goods.
¾Installation:
•The cooler should be placed independently so as to make sure good heat
dissipation. The back of the cooler should be away from the wall 10cm at
minimum.
•Place your wine cooler on a floor that is strong enough to support it when it is
fully loaded. To level your Wine Cooler, adjust the front leveling leg at the
bottom of the Wine Cooler.
•Locate the Wine Cooler away from direct sunlight and sources of heat (stove,
heater, radiator, etc.).Direct sunlight may affect the acrylic coating and heat
sources may increase electrical consumption. Extreme cold ambient
temperatures may also cause the unit not to perform properly.
•Avoid locating the unit in moist areas.
•Plug in the proper power socket. Make sure that the shape and voltage of the
socket is consistent with the nameplate on the back of the cooler.
11
4. Operation Instruction
4.1 Control Panel Below(Single Zone)：
◎ Display Windows
· RUN light：Indicator light of compressor working. While the compressor operating,
the red light is on. While it stops operating, the red light is off.
·SETTING：Display of the temperature you set. The range of temperature setting is
0℃~37℃or 32℉~99℉.
·CHAMBER：Display of the actual temperature inside the cabinet; The range is
0℃~37℃or 32℉~99℉.
· ℃/℉light：When the ℃light is on, it indicates Celsius temperature; When the
℉light is on, it indicates Fahrenheit temperature.
◎ Button Operation
• SET Button：Temperature setting button; Once you press the button, the
temperature increase 1℃or 1℉. Setting range is between 5℃~22℃or
41℉~72℉(ST-33S). 【3℃~18℃or 37℉~64℉(ST-33BC)】【1℃~18℃or
34℉~64℉(ST-54BC)】
• LIGHT Button：Cabinet light control button; Note: Once the light is turned on, it will
automatically off after 10 minutes all out of protecting the wines inside.
• ℃/℉Button：Celsius and Fahrenheit conversion button;
• ON/OFF button：Power on and off button; Press the button, it starts; press it again,
it stops. (Touch products press three seconds to off or on.)
4.2 Control Panel Below (dual zone):