Sinoboom GTTZ10EJ User manual

GTTZ10EJ Maintenance Manual
1
Maintenance Manual
GTTZ10EJ
© Copyright by Hunan Sinoboom Intelligence Equipment Co.,Ltd.
The first edition: May 2020

GTTZ10EJ Maintenance Manual
1
Key Points
Before maintaining the machine, it is necessary to read, understand and observe those safety rules,
operation instructions and maintenance instructions. Only the trained and authorized personnel are
allowed to maintain the machine. It is necessary to always keep this Manual along with the machine as a
part of it. Please contact with Hunan SINOBOOM Heavy Industry Co., Ltd.
Table of Contents
Importance.........................................................................................................................................3
Safety Rules...................................................................................................................................... 3
Product Performance Parameters................................................................................................. 6
Operating Procedures....................................................................................................................10
Regular Maintenance Procedures............................................................................................... 11
Procedure A............................................................................................................................... 16
A-1 Inspect All Manuals.................................................................................................16
A-2 Inspect All Labels....................................................................................................16
A-3 Inspect Damaged, Loose or Lost Parts...............................................................17
A-4 Inspect Hydraulic Oil Level....................................................................................17
A-5 Inspect Hydraulic Oil Leakage..............................................................................18
A-6 Functional Tests...................................................................................................... 18
A-7 Carry out Maintenance after 30 Days..................................................................19
A-8 Inspect Battery.........................................................................................................19
A-9 Inspect and adjust wirerope tightness.................................................................21
Procedure B............................................................................................................................... 21
B-1 Inspect Electric Wires.............................................................................................21
B-2 Inspect Rim，Tire and Fasteners........................................................................ 22
B-3 Test Key Switch....................................................................................................... 23
B-4 Test Emergency Stop Buttons.............................................................................. 23
B-5 Test Horn..................................................................................................................24
B-6 Test Braking Device............................................................................................... 24
B-7 Testing Traveling Speed (Platform in Lifted State)............................................25
B-8 Testing Traveling Speed (Platform in Fully Retracted State)...........................25
B-9 Test Full Lifting and Full Lowering Time............................................................. 26
B-10 Inspect Hydraulic Oil............................................................................................ 26
B-11 Inspect Ventilation System of Hydraulic Oil Tank........................................... 27
Procedure C............................................................................................................................... 27
C-1 Replace Air Filter of Hydraulic Oil Tank..............................................................27
C-2 Inspect Platform Weighing System (Optional)...................................................28
Procedure D...............................................................................................................................28
D-1 Replace Element of Return Oil Filter of Hydraulic Oil Tank............................ 28
Procedure E............................................................................................................................... 29
E-1 Inspect and Replace Hydraulic Oil.......................................................................29
Maintenance Procedures.............................................................................................................. 30
Platform Components............................................................................................................... 31

GTTZ10EJ Maintenance Manual
``
1
1-1 How to Remove Electric Control Box from Platform......................................... 31
1-2 How to Remove Platform....................................................................................... 31
Fly Jib Components...................................................................................................................32
2-1 How to Remove Fly Jib Cylinder...........................................................................32
Boom Components....................................................................................................................32
3-1 How to Remove Boom Assembly......................................................................... 32
3-2 How to Remove Lifting Cylinder of Boom........................................................... 33
3-3 How to Remove Boom............................................................................................33
3-4 How to Assemble Boom......................................................................................... 34
Turntable Components.............................................................................................................. 36
4-1 How to Remove Slewing Motor.............................................................................36
4-2 How to Remove Storage Battery.......................................................................... 37
4-3 How to Remove Hydraulic Valve Block............................................................... 37
4-4 How to Remove Power Unit.................................................................................. 37
4-5 How to Remove Hydraulic Oil Tank......................................................................38
Base Frame Components.......................................................................................................... 38
5-1 How to Remove Traveling Motor.......................................................................... 38
5-2 How to Remove Traveling Reducer..................................................................... 38
5-3 How to Remove Rear Wheel Bearing Seat........................................................ 39
5-4 How to Remove Steering Angle Sensor..............................................................39
Hydraulic System...................................................................................................................... 40
6-1 Detection of Function Pump.................................................................................. 40
6-2 How to Replace Hydraulic Pump..........................................................................40
6-3 Power Unit Control Valve Block............................................................................ 42
6.4 Symbols of Hydraulic System................................................................................43
6-5 Hydraulic Schematic Diagram...............................................................................45
Electrical System............................................................................................................46
7-1 Use and Maintenance of Lead-Acid Storage Battery........................................46
7-2 Trouble Diagnosis (Deltatech System)................................................................ 51
7-3 Fundamental Troubleshooting...............................................................................55
7-4 Electrical Symbols................................................................................................... 58
7-5 Electrical Schematic Diagram............................................................................... 59
Please contact us:
Website: www.sinoboom.com
E-mail: [e-mail]
Service Tel: [phone]
Fax: [phone]
Address: No.128, East Jinzhou Avenue, Ningxiang High-tech Industrial Park, Changsha,
Hunan,China
Zip code: 410600
Trainslation Version
Hunan SINOBOOM Intelligence Equipment Co., Ltd. All Rights Reserved
The first edition: May 2020

GTTZ10EJ Maintenance Manual
``
2

GTTZ10EJ Maintenance Manual
``
3
Importance
Before maintaining GTZZ10EJ, it is necessary to read,
understand and observe corresponding safety rules
and operation instructions.
This Manual provides detailed maintenance
information for the owner and the operator, and
specifies inspection, maintenance and troubleshooting
methods and procedures for the competent
professional maintenance personnel.
The execution of maintenance procedures requires
basic knowledge on machinery, hydraulic and
electrical aspects. Some maintenance procedures
need special skills, tools, lifting equipment and
appropriate work place. Therefore, it is strongly
recommended to maintain and repair at the
designated service center of the SINOBOOM.
Hunan SINOBOOM Heavy Industry Co., Ltd. will
provide accurate information and quality services.
However, the products will be improved continuously
and technical specification of product may be modified
without advance notice. We suggest the users to
update latest product maintenance specifications
regularly.
We will appreciate if the customers could inform us the
deficiencies of the products and propose improvement
measures. We will consider all suggestions carefully
and use them as the reference for the preparation of
maintenance specification and other specifications.
Please contact us by E-mail or fax.
Safety Rules
Hazard
Failure to observe the instructions in this Manual and
corresponding operation manual would cause death or
serious injury accident.
Pay attention to the unsafe operations mentioned in
the operation manual when carrying out maintenance
procedures.
Do not operate, unless:
You have understood and observed the safe
operation rules in the operation manual
You shall have read, understood and observed
—Manufacturer’s instructions and safety rules
—User’s safety rules and workplace regulations
—All the applicable government regulations
You must use appropriate tools, lifting equipment
and work place.
Personal safety
All working staff on or around the machine must be
aware of any possible safety hazards. The personal
safety and the continuous and safe operation are the
most important.
Read the procedures carefully.
The marks used in the labels in
this manual and on the machine
are defined as follows:
Safety warning mark- It is used to prompt
potential personal injuries. Observe all
safety prompts behind this mark for the
purpose of avoiding personal injuries or
death.
Red mark- It is used to prompt the urgent
hazardous cases; if not avoided, it would
lead to death or serious injuries.
Orange mark- It is used to prompt
potential hazardous cases; if not avoided,
it would lead to death or serious injuries.
Orange mark with safety warning- It is
used to prompt potential hazardous case;
if not avoided, it might lead to mild or
moderate personal injury.
Orange mark without safety warning- It is
used to prompt potential hazardous case; if not avoided, it might
lead to property losses.
Green mark- It is used to prompt operation or maintenance
information.
It is necessary to wear protective goggles,
and work clothes.
Hazard
Warning
Caution
Caution
Attention

GTTZ10EJ Maintenance Manual
``
4
With potential hazards such as movable
parts, components which could rotate
freely or have not been fixed, lifting or
moving weight. Be sure to wear work
boots.

GTTZ10EJ Maintenance Manual
``
5
Safety in Work Place
Keep sparks, flame and lit cigarette end
away from flammable and explosive
materials such as storage battery and
engine fuel. Equip qualified fire
extinguisher nearby.
Maintain all tools and work place properly
for future use. Ensure the working
environment to be clean and prevent the
sundries or fragment dropping into the
machine components, resulting in damages.
Ensure good ventilation and illumination
conditions in the work place and working
area.
Ensure any forklift, traveling crane or other
lifting/supporting equipment to have
sufficient bearing and lifting capacity.
Ensure to use steel wire rope or belt with
sufficient bearing capacity and in good condition.
Do not use disposable fasteners (such as
split pins and self-locking nuts) repeatedly.
The components might become invalid if
they are used again.
Dispose the used hydraulic oil and other
fluid appropriately. Use appropriate
container. Protect the environment from
being polluted.

GTTZ10EJ Maintenance Manual
``
6
Product Performance Parameters
Parameter Items
GTTZ10EJ
Maximum platform height
8.3m(27 ft 3 in)
Maximum working height
10.3m(33 ft 9.5 in)
Maximum horizontal extension
3.3m(10 ft 10 in)
Rotation of turntable
345°
Tailswing of turntable
0
Jib pitch angle
+70°/-50°
Length- in retracted state
2.97m(9 ft 9 in)
Width- in retracted state
0.99m(3 ft 3 in)
Height- in retracted state
1.99m(6 ft 6 in)
Wheel base
1.2m(3 ft 11 in)
Ground clearance(Pothole protection plate close)
0.06m(2.36 in)
Ground clearance(Pothole protection plate open)
0.02m(0.79 in)
Platform dimensions (L x W x H)
0.99mx0.7mx1.1m(39x27.5x43in)
Allowable quantity of people working on the platform
(indoors)
2 person
Allowable quantity of people working on the platform
(outdoors)
1 person
Bearing capacity of platform
200kg(440 lbs)
Traveling speed- in retracted state
0~4km/h(0~2.5 mph)
Traveling speed- in lifted state
0~0.6km/h(0~0.37 mph)
Lifting time of main jib
57s～66s
Lowering time of main jib
47s～57s
Maximum allowable wind speed (indoors)
0m/s
Maximum allowable wind speed (outdoors)
12.5m/s(28 mph)
Maximum allowable yawing force (indoors/outdoors)
400N/200N
( 90 lbf/45 lbf)
Gradeability
25%
Inner/outer turning radius
0m/1.55m
(0 ft/5 ft 1 in)

GTTZ10EJ Maintenance Manual
``
7
Allowable dip angle when working(portrait/lateral)
3°/3°
Tire specification/type
406x127mm//Solid tire(16 x5in)
Battery voltage/capacity
6Vx4/240Ah
Power unit
24V DC ，3 kW(24V DC ，4 hp)
Control voltage
24V DC
Allowable ambient temperature (lithium batteries)
-20°C to 40°C -(4°F to 104°F)
Allowable ambient temperature (lead-acid batteries)
-10°C to 40°C (14°F to 104°F)
Driving mode
2WD，Rear wheel
Input voltage of charger
100～240V AC
Output current of charger
30A
Pressure of hydraulic system
15Mpa(2175psi)
Brake
2Rear wheel
Capacity of hydraulic system
13L(2.8 gal(UK)/3.4 gal(US))
Total weight (indoors/outdoors)
2678kg(5904 lbs)
Applicable standards
ISO/CE/ AS / CU-TR/KCS

GTTZ10EJ Maintenance Manual
``
8
Description of Hydraulic System
Hydraulic oil
Normal temperature region (-10°C to 40°C)(14°F
to 104°F):L-HM46;
Cold region (-30°C to -10°C)( -22°F to 14°F):
L-HV32
Hot region (>40°C (>104°F)): L-HM68;
Extremely cold region (<-30°C (<-22°F)): Special
scheme to be determined;
Different hydraulic oil may be filled in according
to the requirements of the customer upon
delivery.
Hydraulic pump
Type
Gear pump
Flow rate (at 3000r/min)
11L/min
Maximum driving pressure
150bar
Functional valves
Pressure of function main safety
valve
150bar
Pressure of slewing motor overflow
valve
50bar
Pressure of pit-hole reducing valve
50bar
Oil return filter
Oil return filter of hydraulic oil tank
TL441C/30
Bypass pressure of oil return filter
2.5bar
Gearbox of traveling motor
Gearbox ratio
45.13:1
Brake torque of gearbox
15ft-lbs
Output speed of gearbox
75rpm
Input voltage of traveling motor
24V
Output speed of traveling motor
3400rpm

GTTZ10EJ Maintenance Manual
``
9
Installation Instructions for Hydraulic Hoses
and Fittings
When removing or installing the hydraulic hoses
and fittings with O-ring, it is necessary to
operate as per the torque specified in the
following table.
Hose fittings
Thread
Torque Nm
G1/8A
20±1
G1/4A
35±2
G3/8A
50±3
G1/2A
75±5
G3/4A
120±8
G1A
180±10
G1 1/4A
240±15
G1 1/2A
280±20
Hoses
Thread
Torque Nm
M12×1.5
19±1
M14×1.5
26±2
M16×1.5
40±3
M18×1.5
50±4
M22×1.5
70±5
M26×1.5
90±6
M30×2
120±8
M36×2
150±12
M45×2
240±15
M52×2
250±16
Tightening Procedures
1. Replace the O-ring. It is necessary to
replace the O-ring if the seal has been
damaged. The O-ring shall not be reused if
the pipe fitting or the hose has between
tightened.
2. Lubricate the O-ring before installation.
3. Ensure to place and fix the O-ring properly.
4. Align the hose nut to the pipe fitting, and
tighten the nut.
5. Tighten the nut or the pipe fitting as per the
torque specified in the above table.
6. Perform all machine functions and inspect
hoses, hose fittings and relevant
components to confirm that no leakage
occurs.

GTTZ10EJ Maintenance Manual
``
10
Operating Procedures
Energy
Four 6V lead-acid storage battery are
connected in series and drive one 24V DC
motor. The gear pump is connected to the
output shaft of the motor with the spline to
provide power for the system.
Hydraulic System
All functions except for traveling and braking of
the machine are driven by the hydraulic
functions. The entire hydraulic system may be
divided into five parts: tire steering function,
turntable slewing function, main jib
lifting/lowering function, fly jib lifting/lowering
function and pit-hole switching function.
When the motor works, the hydraulic pump will
deliver the pressure oil to the functional valve
block on which the directional valve is installed
and is used to complete different actions. For
protecting relevant components, and prevent
the system overloading, the valve block is fitted
with overflow valve.
Electrical System
Four separate 6V storage batteries are installed
in this system and are used to drive the DC
motor on the hydraulic pump and the DC motor
reducer box on the tire. The storage batteries
are re-charged with external power supply.
Machine Control
The functions of the machine are controlled with
one controller in this system. This controller is
installed in the ground control box. The
controller exchanges data through a high-speed
data bus.
Safety Measures
A series of angle sensors and limit switches
provides signals to the controllers. The level
sensor measures the angle of vehicle body on
axis X and axis Y; when the angle on axis X or
the angle on axis Y exceeds 3°, the alarm will
be triggered, and the machine could not lift,
travel or turn.
The travel switch is used to verify whether the
pi-hole protector is turned on; if the boom is
lifted up by about 0.2m(7.9 in) off the ground,
the pit-hole protection plate has not be unfolded
and the sensor has not detected signals, the
platform will stop lifting.

GTTZ10EJ Maintenance Manual
``
11
Regular Maintenance Procedures
Compliance
The maintenance and inspection should
be completed by trained and competent
personnel.
The regular maintenance inspection
consists of daily, quarterly, semiannual,
annual and biennial maintenance. The
maintenance and inspection personnel
must inspect and maintain according to
the maintenance and inspection reports,
and fill in maintenance and inspection
reports in details.
Warning: Failure to carry
out maintenance
procedures specified
herein timely and regularly may lead to death,
serious injury or machine damages.
The damaged or troubled machine must
be labeled and moved away timely.
The damaged or troubled machine must
be repaired before operation.
All records shall be stored for at least
three years.
The machine which has not been
maintained by over three months must be
subjected to quarterly inspection.
Unless otherwise specified, the
maintenance procedures shall be carried
out according to the following precautions:
Park the vehicle on level firm ground.
Engage the platform in loaded state.
Turn the key switch to the position “OFF”
and take down the key.
Turn the red emergency stop buttons on
platform controller and ground controller to
the position “OFF”.
Disconnect all DC power supplies on the
machine.
Lock the tires.
Description
This section provides detailed operation
procedures for the regular maintenance and
inspection.
The procedure includes description, safety
warning and step description.
Symbol Definition
Safety warning mark- It is used to
prompt potential personal injuries.
Observe all safety prompts behind
this mark for the purpose of
avoiding personal injuries or
death.
Red mark- It is used to prompt the
urgent hazardous cases; if not
avoided, it would lead to death or
serious injuries.
Orange mark- It is used to prompt
potential hazardous cases; if not
avoided, it would lead to death or
serious injuries.
Orange mark with safety warning-
It is used to prompt potential
hazardous case; if not avoided, it
might lead to mild or moderate
personal injury.
Orange mark without safety
warning- It is used to prompt
potential hazardous case; if not
avoided, it might lead to property
losses.
Green mark- It is used to prompt operation or
maintenance information.
Hazard
Warning
Caution
Caution
Attention
Warning

GTTZ10EJ Maintenance Manual
``
12
Maintenance Symbol Definition
Attention: The following
symbols are used in this
manual for helping the
reader understand the intent of this
specification. If one or several symbols are
marked in front of the maintenance procedure,
it is defined as follows:
Indicate the tools for carrying out this
operation.
Indicate new parts for carrying out this
operation.
Indicate that hydraulic motor must be
stopped before carrying out this
operation.
Indicate that hydraulic motor must be
started before carrying out this
operation.
Indicate that this operation must be
carried out by the supplier.
Maintenance Schedule
There are five types of repair & inspection to be
carried out according to the schedule: Every
day, every quarter, every six months, every
year and every two years. With consideration to
the repeated procedures, the “Regular Repair
Procedure Section” and the “Repair &
Inspection Report” shall be classified into five
sections- A, B, C, D and E. The necessary
procedure combination for regular inspection
shall be determined according to the following
table.
Inspection Interval Inspection Procedures
Every day or every 8 hours A
Every quarter or every 250 hours A+B
Every half a year or every 500 hours A+B+C
Every year or every 1,000 hours A+B+C+D
Every two years or every 2,000 hours A+B+C+D+E
Repair & Inspection Report
The repair & inspection report shall include the
inspection table of each regular inspection.
Duplicate the repair & inspection report for each
inspection. Store the completed tables by over
three years.
Attention

GTTZ10EJ Maintenance Manual
``
13
Pre-delivery Inspection:
It is quite necessary to carry out the preparation
before delivery.
Carry out this procedure each time before
delivery for the convenience of finding before
putting the machine into service whether there
are any obvious errors.
Damaged or troubled machine shall not be
used. It is necessary to label and move away
the machine if finding damaged or abnormal
machine.
The machine repair must be completed by the
competent repair personnel strictly according to
the repair manual.
Daily maintenance must be completed by the
competent operator according to the provisions
of this Manual
Description:
Use the operation manual for this machine.
The preparation before delivery includes
inspection before delivery, maintenance
procedures and functional inspections.
Record the inspection results. If any inspection
result is N, it is necessary to stop the machine,
repair the machine and then re-inspect the
machine, and mark R.
Notes:
Y—Yes, the machine is in good condition.
N—No, the machine has trouble.
R—Repaired, the machine has been repaired.
Record Form of Preparation before Delivery
Items
Y
N
R
Inspection before
Delivery
Maintenance
Procedures
Functional Inspections
Model
Serial No.
Date
User
Signature of Inspector
Position of Inspector
Organization of Inspector
Attention

GTTZ10EJ Maintenance Manual
``
14
Maintenance Record Form:
Model
Serial No.
Date
User
Signature of Inspector
Position of Inspector
Organization of Inspector
Description
Record the following results after inspection on
each step.
Time Interval Inspection
Procedures
Every day or every 8 hours A
Every quarter or every 250 hours A+B
Every half a year or every 500 hours A+B+C
Every year or every 1,000 hours A+B+C+D
Every two years or every 2,000 hours
A+B+C+D+E
Inspect according to the steps in this section to
get acquainted with the inspection procedures.
Record the inspection results. If any inspection
result is N, it is necessary to stop the machine,
repair the machine and then re-inspect the
machine, and mark R.
Notes:
Y—Yes, the machine is in good condition.
N—No, the machine has trouble.
R—Repaired, the machine has been repaired.
Record Form A
Items
Y
N
R
A-1 Inspect All Manuals
A-2 Inspect All Labels
A-3 Inspect Damaged, Loose or
Lost Parts
A-4 Inspect Hydraulic Oil Level
A-5 Inspect Hydraulic Oil Leakage
A-6 Functional Inspections
Carry out Inspections of New Vehicle after
40 Working Hours
A-7 Carry out Maintenance after
30 Days
Carry out Inspections Every 125 Hours
A-8 Inspect Battery
Record Form B
Items
Y
N
R
B-1 Inspect Electric Wires
B-2 Inspect Rim and Tire
(Including Mounting Nuts)
B-3 Test Key Switch
B-4 Test Emergency Stop Buttons
B-5 Test Horn
B-6 Test Braking Device
B-7 Test Traveling Speed
(Platform in Lifted State)
B-8 Test Traveling Speed
(Platform in Fully Retracted State)
B-9 Test Full Lifting and Full
Lowering Time
B-10 Inspect Hydraulic Oil
B-11 Inspect Ventilation System of
Hydraulic Oil Tank
Record Form C
Items
Y
N
R
C-1 Replace Air Filter of Hydraulic

GTTZ10EJ Maintenance Manual
``
15
Oil Tank
C-2 Inspect Platform Weighing
System (Optional)
Record Form D
Items
Y
N
R
D-1 Replace Element of Return Oil
Filter of Hydraulic Oil Tank
Record Form E
Items
Y
N
R
E-1 Inspect and Replace Hydraulic
Oil

GTTZ10EJ Maintenance Manual
``
16
Procedure A
A-1 Inspect All Manuals
Storing the operation manual and the
maintenance manual in appropriate place is of
great importance to the safe operation of the
machine. The manuals shall be stored in the
dedicated storage box on the platform. The
illegible or damaged manuals could not provide
necessary safety and operation information for
safe operation.
1. Inspect and confirm that the document box
is placed on appropriate position of the
platform.
2. Inspect and confirm that the operation
manual and the maintenance manual are
stored in the storage box on the platform
properly.
3. Inspect the pages of the manuals and
confirm that they are legible and intact.
4. Return the manual into the storage box
after use.
Attention: If needing to
replace the manual,
please contact with
Hunan SINOBOOM Heavy Industry Co., Ltd.
A-2 Inspect All Labels
Maintaining all safety and prompt labels
properly is of great importance to the safe
operation of the machine. The labels are used
to prompt the operator the potential risks in the
operation process, and meanwhile provide
operation and maintenance information to the
user. The illegible labels could not guide the
operator properly, and might result in unsafe
operation.
1. Consult to the label section in the
GTTZ10EJ Operation Manual” and
determine the correct positions of the
labels according to the label list and chart.
2. Inspect whether all labels are legible and
intact; replace the damaged and illegible
labels timely.
Attention: If needing to replace the labels,
please contact with
Hunan SINOBOOM
Heavy Industry Co., Ltd.
Attention
Attention

GTTZ10EJ Maintenance Manual
``
17
A-3 Inspect Damaged, Loose or Lost Parts
Inspecting the condition of the machine daily is
of great importance to the safe and reliable
operation of the machine. It would lead to
unsafe operation if the damaged, loose or lost
parts have not been found and repaired timely.
Observe the entire machine and check whether
any parts are damaged, installed improperly or
lost, including:
Electrical components, wirings and cables
Hydraulic power unit, oil tank, fittings,
hoses, hydraulic cylinders and valve
blocks
Storage battery pack and its connection
Driving motor and its fastening bolts
Tires and its fastening nuts
Power unit
Limit switch and horn
Alarms and indicator lamps (if equipped)
Nuts, bolts and other fasteners
Platform door rod bolt
Pit-hole protector
Slewing motor and its fasteners
Pin shafts and fasteners for fly jib
Platform joystick
A-4 Inspect Hydraulic Oil Level
Ensuring appropriate hydraulic oil is of great
importance to the normal operation of the
machine. The hydraulic components may be
damaged of the hydraulic oil level is
inappropriate. By virtue of daily inspection, the
observer could learn about the oil level changes
so as to find the problems existing in the
hydraulic system.
Attention: Open the right door and carry out this
procedure.
Observe the scale line on the side plate of
hydraulic oil tank.
Attention: The
hydraulic oil level
should be within the
mark of "min" and "max" in the oil tank.
Attention

GTTZ10EJ Maintenance Manual
``
18
A-5 Inspect Hydraulic Oil Leakage
Preventing hydraulic oil leakage is of great
importance to the safe operation and normal
work of the machine. It would lead to hazardous
situation, impair the machine performance and
damage the components if the leakage has not
been found.
Observe whether there are overflowing,
dripping or residual marks on or around the
following components:
Hydraulic oil tank- filter, pipe fittings, oil pipe,
power unit
All hydraulic cylinders and pumps
All hydraulic valve blocks
The area around the machine
A-6 Functional Tests
Inspect Platform and Ground Controller
Testing functional switches and emergency stop
buttons of machine is of great importance to the
safe operation of the machine. If any function
could not operate normally or the emergency
stop buttons could not stop all functions, it
would lead to unsafe cases. Any function shall
operate stably and reliably, and there shall be
no swaying, or strong and abnormal noise.
Inspect Ground Controller
1. Turn the key switch to the ground
controller.
2. Turn the functional switches on ground
control panel.
Result: All functions shall be performed
normally (refer to “Operation Manual” for the
indication of specific functions).
Inspect Platform Controller
1. Turn the key switch to the platform
controller.
2. Try to press the function control handle of
the machine, turn the switch or the button.
Result: All functions shall be performed
normally (refer to “Operation Manual” for the
indication of specific functions).