Sinope SP2600ZB User manual

SP2600ZB
Quick start guide
Smart Plug
INTRODUCTION
YOUR SP2600ZB SMART PLUG
This guide will give you an overview of the
Sinopé Smart Plug and will help you perform
the initial setup.
The SP6000ZB Smart Plug allows you to control
your device remotely with your smartphone,
tablet, or computer.
The plug also measures the power
consumption of connected devices, and you
can track the number of kilowatt-hours
consumed from anywhere, anytime *.
ON / OFF BUTTON
Notices:
• Indoor use only.
• Do not exceed the rated current of the plug
• The ON / OFF button is used to close the
device. The Smart Plug must be located where
the ON / OFF button is easily accessible and
can also be unplugged from the main outlet.
• Clean only with a dry cloth
• Risk of electric shock. The integrity
of the grounding must be maintained.
* Available functionality if supported by your
compatible Zigbee gateway and its application.
POWER /
CONNECTION STATUS LED
ADD YOUR SMART PLUG TO THE
GT130 GATEWAY AND NEVIWEB
Tap the then select "Add Device"
2
1If you do not have an
account yet, download the
Neviweb app for iOS or
Android to open an account
and add your device.
Follow the steps of the Installation Wizard
3
zigbee HA 1.2

TECHNICAL SPECIFICATIONS
CONNECT YOUR SMART PLUG TO A COMPATIBLE ZIGBEE SYSTEM
Initiate the connectivity
session of your compatible
Zigbee hub by referring to
the device's user guide.
Operating voltage: AC 120 V 60 Hz
Maximum load: 120V - 15A
Operation temp.: 0 °C to 40 °C (32 °F to 104 °F)
Storage: 20 °C to 50 °C (-4 °F to 122 °F)
Maximum load:
Resistive: 1800 W
Incandescent: 960 W
Electronic ballast: 500 VA
Motor: 0.5 HP
Certifications:
Conforms to UL 60730-1 / CSA E60730-1
Indoor installation only
Zigbee HA 1.2 profile
Frequency: 2.4 GHz
Transmission power: +8 dBm
Connect all your
compatible Zigbee devices
the same way, by going to
the next closest device.
3
When your smart plug is
connected, close the connectivity
session of your compatible
Zigbee gateway.
4
Connect the smart plug to your network by
pressing the ON / OFF button once
The connection status light
Blinks green: The smart plug is connecting
Green for 5 seconds: Connected
Note: If the smart plug can not reach the
gateway’s network after one minute, reset it
and try again.
2
1
Hub
2nd
1st
3rd
3-year limited warranty
SINOPE TECHNOLOGIES INC. warrants the components of
their products against defects in material and workmanship
for a 3-year period from the date of purchase, under
normal use and service, when proof of purchase of such
is provided to the manufacturer. This warranty does not
cover any transportation costs that may be incurred by the
consumer. Nor does it cover a product that has been
improperly installed, misused or accidentally damaged.
The obligation of SINOPÉ TECHNOLOGIES INC., under the
terms of this warranty, will be to supply a new unit and this
releases the manufacturer from paying the installation costs
or other secondary charges linked to replacing the unit or
the components.
For more information, visit our Website:
660-2520-0001-B
Neviweb® is a registered trademark of Sinopé Technologies Inc. in
Canada and the United States.
Apple and the Apple logo are trademarks of Apple Inc., registered in
the U.S. and other countries. App Store is a service mark of Apple Inc.,
registered in the U.S. and other countries. Google Play and the Google
Play logo are trademarks of Google Inc.
Transmitter module IC: 3653A-EM3585 / FCC ID: NHS-EM3585
This device complies with Industry Canada license exempt RSS
standard(s). Operation is subject to the following two conditions: (1) this
device does not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation
of the device.
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy, and if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the
equipment OFF and ON, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected. Consult the dealer or an experienced
radio/TV technician for help.
• Avoid using in an environment with high humidity
or extreme temperatures
• Do not expose the device or its accessories to
flammable liquids, gases, or other explosives.
• Controllable devices should never be used to
supply power to or control the ON/OFF status
of medical and/or life support equipment.
WARNING: Failure to follow these safety instructions
can result in fire, electric shock, other personal
injuries, or damage to the smart plug and other
property. Read all the safety instructions below
before using the smart plug.
Reset. Press and hold the ON / OFF
button for six seconds.
(The indicator will remain on
for 10 seconds.)