Sinovision HDE01F User manual

USERMANUAL
HDE01F
HDMIFiber OpticTransmission
550Meters
1.0Introduction
2.0PanelDescription
3.0Function Specification
4.0Connectionandoperation

1.0Introduction
HDE01Fisaperfect solution for transmittingHDMI audioand videothroughthe fiber, the set
ofdeviceincludes asender ofHDE01FTand areceiver ofHDE01FR.Ourproductstransmit the
HDvideo through gigabitsofopticalfiber, which making theimages clearer as well as the
transmission morestable.Atthe sametime,the producthasthe built-inIRremotecontrolfunction.
2.0PanelDescription
2.1Front Panel
HDMI TX HDMI RX
HDMI PORT Video Input Video Output
IRPORT IRInput IR Output
Fiber Port SC Optic-fiberDataTransmission
RESETKEY Holddownthe keyfor8seconds after power on, the modelwill restoredefault settings
Attention Toensureyour safety, please usethe ouroriginalpower cords, andconnect tothe
securesocket correctly.
2.3Indicator led.
Indicatorled Status
FX Light On Thefibertransmission rateisnormal
Light Off Thefibertransmission rateisabnormal
LinkACT Light On NetworkLinkup
Flash Packetsofdataaretransmittingintheindicating
port
FDX Light On Inthe Stateoffull-duplex
Light Off Inthe Stateof half-duplex

3.0Function Specification
>HDMI 1.3/HDCP1.1&1.2
>BothOptic-fiber transmission.
>Support point-to-point mode, one point-to-manymode and cascaded transmission mode.
>built-inIRremotecontrolfunction, you can controlthe set-top box at the receiving siteusing the IR
remotecontrol.
>Purehardwaredesign, just plug andplay, no need toinstall extrasoftware.
VideoParameter
Video Resolution
640X480 @60fps 800X600 @60fps
1024X600 @60fps 1024X768 @60fps
1152X864 @60fps 1280X600 @60fps
1280X720@60fps 1280X768@60fps
1280X800@60fps 1280X960@60fps
1280X1024@60fps 1440X1050@60fps
1440x900 @60fps 1600x900 @60fps
1660x1200 @60fps 1680x1050 @60fps
1920x1080 @60fps 1920 x1200 @60fps
Audio 32kHz, 44.1kHzand 48kHz
InfraredSupport 38KHz; NEC code
HDMI Version HDMI 1.3
HDCP Version HDCP 1.2
FiberParameter
Fiber Interface SC
Fiber Standard IEE802.3z/AB 1000Base-T/SX/LX
FiberType Singlemode
CenterWavelength 1310 nm
Transmission
Distance 550M
MinSending Power -8.0dBm
MaxSending Power -3.0dBm
Receiving Sensitivity <-21 dBm
Allowed LinkLoss 13.0dBm
Transmission Rate 1000M
OtherParameters
Power input AC input: 100V-240V(50-60Hz)
MaxPower
Consumption HDE01FT:5W
HDE01FR: 5W
Size(D-W-H)
NetWeight
Operating
Temperature/Humidity
0℃-70℃/ 10%- 80%RH(no condensation)
Storage
Temperature/Humidity
-10℃- 80℃/5%-90%RH(no condensation)

FiberParameter
Product
Model Max Distance
Fiber
type Optical Interface
Wave
Length Optical Power Receiving Sensitivity
Link
Budget
HDE01F
550M multi
mode SC 850nm -9~-3dBm
-26dBm -17dBm
4.0Connection and operation
1. PleaseconnecttheHDMI signalsourcetothe HDE01FT
2. Connect HDE01FRtothe HD displayer.
3. BetweenHDE01FT andHDE01FR(SCport-to-SCport)useapair of opticalfiberup
to20Kmtoconnect.
4. ifyou wanttotransmitnetworkdatawhiletransmitting the videos, pleaseconnectthe
RJ45 port , thisportsupportgigabit transmit.
5. IRremotecontrolfunction, connect the IRreceivertothe HDMI TXand connect the
IRtransmittertotheHDMI RX.
6. Poweronthedevice,POWERlighton,thenit will do theself-checking jobwiththe
otherindictorsblinking automatically.Whenthe STATUS lightonorflash, the
devicestartsup.