Sinovision HDE01X User manual

HDMI Extenderby TCP/IP
HDE01X
USERMANUAL
HDMI Extender over SingleUTP120M

HDMI Extenderby TCP/IP
HMDI Extender byTCP/IP
Dearcurtomer
Thankyou forpurchasingthisproduct.Foroptimumperformaceandsafety,pleaseread
theseinstructionscarefullybeforeconnecting,operatingoradjustingthisproduct.Please
keep thismanualforfuturereference.
1.0 INTRODUCTION
HDMI ExtenderbyTCP/IPisbaseonTCP/IPstandard.It extendsyourHD displaywiththe
resolutionsof1080p/60Hzup to395feets(120meters)awayfromyourHDMIorDVI-D
sourcebyusingone CAT5e/6cable.
Withthe advantageofTCP/IPstandard,you can extendyou HD video tomultipledisplays
byusingan Ethernet routerorhuband the totaldistancecan be up tomax660 feets
1.1FEATURES
lHDMI 1.3b
lFollowingTCP/IPstandard.
lSupportsresolutionupto480p/720p/1080i/1080p.
lCAT5e/6cablefollowsthe standardofIEEE-568B
2.0 SPECIFICATIONS
Signal Input/Output
Input/Outputportof sender HDMIFemalex1
RJ45 Femalex1
IR Extenderinx1
RS232 in x1
Input/OutputportofreceiverHDMIFemalex1
RJ45 Femalex1
IR Extenderoutx1
RS232 out x1
Operating Frequency
Vertical Frequency Range 50/60HZ
VideoAmplifierBandwidth Maxup to 1.65Gbps/165MHZ
Resolutions(HDTV)
Interlaced(50&60HZ) 480i,576i,1080i,forHDMI
Progressive(50&60HZ) 480P,576P,1080P forHDMI

HDMI Extenderby TCP/IP
Mechanical
Size(L-W-H) 103X100X24mm
Weight(Net) 800g
Environmental
OperatingTemperature 0 C-70 C
Operation Humidity 10%-85%RH(no condensation)
StorageTemperature -10 C+80 C
StorageHumidity 5%-90%RH(no condensation)
PowerRequirement
ExternalPowerSupply DC 5V@1Ax2
Powerconsumption(Max) 2.5W
Accessories Adapter
Usemanual EnglishVersion
3.0 PACKAGECONTENTS
Beforeattemptingtousethisunit, pleasecheck the packagingand makesurethefollowing
itemsarecontained inthe shippingcarton:
1)Mainunit No.1Sender
2)Mainunit No.2receiver
3)Twopiecesof DC 5V 1Apowersupply
4)User sManual
4.0 Panel Descriptions
Sender
1234

HDMI Extenderby TCP/IP
56
1:DC5V
Powersupplyforsender
2:IR
IRextenderinput
3:LED
PowerLed display
4:HDMI IN
HDMI input port connect HMI sourcetothisport
5:RS232
RS232 input port
6:CATOut
Connect thesendertothe receiverorEthernet routerorhubbyusing aCat5E/6cable
Receiver
1234

HDMI Extenderby TCP/IP
56
1:DC5V
Powersupplyforreceiver
2:IR
IRextenderoutput
3:LED
PowerLed display
4:HDMI out
HDMI out port connectHMI sinkdevicetothisport
5:RS232
RS232 outputport
6:CATin
Connect theReceivertotheSenderorEthernet routerorhub byusingaCat5E/6 cable
5.0 Connection andOperation
1)Connect theHDMI source(suchasDVD,PS3,STB)tothe HDMI INoftheSender
2)Connect theHDMI outofreceivertoHDTV display
3)UseoneCat5e/6cableup to120mtoconnectthe senderand receiver
4)Plugtwopiecesof 5V powersupplyintothe senderandreceiver
5)Poweron theHDTV displayand HDMI souces
Attention :Insert/Extractcablegently
5.1 RS232 Operation:
Thisfunction operatedbySuperTerminal firmware.
SenderDevice(TX)IPaddressis: 192.168.168.55
Receiver. Device(RX)IPaddress is:192.168.168.56
1)SettingRS232 port:
Baudrate:115200
Databits: 8
Parity: none
Stop bits:1
Flowcontrol: none

HDMI Extenderby TCP/IP
2)Operation:
Note:TheRS232commandscanbesentfrom TXtoRXorRXtoTXareboth
available.
a)From Sender(TX) senddatato Reviver(RX):
Firstwrite Receiver IPaddress(192.168.168.56),HEXformat C0A8A838,thenwrite
yourdata(ASCII CODE),andthenpress “send”key,thedatawill be sentto Receiver
RS232 port.
b)From Receiver(RX) senddatato Sender(TX):
Firstwrite Sender IPaddress (192.168.168.55),HEXformat C0A8A837,then writeyour
data(ASCII CODE),and then press “send”key,thedatawill besentto SenderRS232
port.
5.2 IR Extension
IRreceiverConnected totheReceiver(RX)
IRsenderConnected totheSender(TX)
5.3 CONNECTION DIAGRAM
Application 1:Application 2:
(default) (Customizedfunction, ifneed, please notifyus)