Sirio Antenne GP 160 LB User manual

Model GP 160 LBGP 160 LB
GP 160 LBGP 160 LB
GP 160 LB
VHFVHF
VHFVHF
VHF Base Station Antenna 145-175 MHzBase Station Antenna 145-175 MHz
Base Station Antenna 145-175 MHzBase Station Antenna 145-175 MHz
Base Station Antenna 145-175 MHz
BCopyright SIRIO antenne - Technical Data are subjected to change - Printed in ITALY - Rev. 20/01/2003 - Cod. ID064
OPTIONAL FT-2 FIXING BRACKET
Type : Side Mast Fixing Bracket
Top Size : ∅38 mm for antenna fitting
Botton Size : ∅42/50 mm for fitting on the mast
Weight (approx.) : 1100 gr
Material : Galvanized Steel
P/N 2510004.00 FT-2 Universal
Installation ManualInstallation Manual
Installation ManualInstallation Manual
Installation Manual

MOUNTING INSTRUCTIONS
DESCRIPTION
1/4 λ wide-band antenna for base station service covering the frequency range of 145-175
MHz. It as been developped according to the most modern technologies to assure a perfect
protection against the worst atmospheric climates and to get the best performance. It is entirely
made of aluminium to assure strength and robustness and its radial whip is earthed. Its 30 MHz
bandwidth makes it particularly recommended for relay stations or two-party systems.
SPECIFICATIONS
Electrical Data
Type : 1/4 λFolded Ground Plane
Frequency Range : 145-175 MHz at V.S.W.R.≤2:1
Impedance : 50 ΩUnbalanced
Radiation (H-plane) : 360oOmnidirectional
Radiation (E-plane) : Beamwidth at -3 dB = 78o
Radiation angle deg. : 0o
Polarization : Vertical
Gain : 0 dBd - 2.15 dBi
Bandwidth at V.S.W.R. 2:1 : 30 MHz
V.S.W.R. at res. freq. : ≤1.2 : 1
Max Power : 1000 Watts
Feed System / Posistion : Direct DC-Ground / Center
Connector
GP 160 LB - U : UHF Female, gold plated central pin
GP 160 LB - N : N Female, gold plated central pin and teflon insulator
Mechanical Data
Materials : Anodized Aluminium, Nylon, Stainless Steel
Wind Load / Resistance : 43 N at 150 Km/h / 160 Km/h
Wind Surface : 0.04 m2
Height (approx.) : 700 mm
Weight (approx.) : 1150 gr
Mounting Mast : ∅36-40 mm
ID064