Sirio Antenne IN-GLASS W-LAN User manual

Model IN-GLASS W-LANIN-GLASS W-LAN
IN-GLASS W-LANIN-GLASS W-LAN
IN-GLASS W-LAN
On-Glass Indoor AntennaOn-Glass Indoor Antenna
On-Glass Indoor AntennaOn-Glass Indoor Antenna
On-Glass Indoor Antenna
Installation ManualInstallation Manual
Installation ManualInstallation Manual
Installation Manual
BCopyright SIRIO antenne - Technical Data are subjected to change - Printed in ITALY - Rev. 30/07/2002 - Cod. ID301
WINDOW HOME INSTALLATION
ALTERNATIVE INSTALLATION
Choose the mounting position
far from metallic parts

DESCRIPTION
W-LAN indoor antenna conceived for inside on-glass installation. The radiant element is made on
PCB in Microstrip technology protected by a thermoplastic material. IN-GLASS W-LAN is supplied
with a 3M VHB adhesive tape for a permanent fitting. It is available the removable version thanks
to its 3M adhesive dual lock which allows it to be detached and repositioned.
SPECIFICATIONS
Electrical Data
Type : On-glass Indoor Antenna
Frequency Range : 2300-2500 MHz (W-LAN)
Impedance : 50 ΩUnbalanced
Beamwidth Vertical : E-plane 52°at 2.4 GHz
Beamwidth Horizontal : H-plane 360°Omnidirectional
Downtilt : 0°
Polarization : Vertical
Gain : 2.14 dBi
V.S.W.R. : ≤2 : 1
Max Power : 10 Watts
Connector type : SMA Male, other type on request
Cable Type / Length : RG 174 A/U / standard 3 m or on request
Mechanical Data
Materials : PCB, Thermoplastic, Copper
Dimensions (approx.) : 57 x 77 x 10 mm
Weight (approx.) : 70 gr
Operating Temperature : -20°C to +80°C
Mounting : "On-Glass"
ID301
MOBILE MOUNTING INSTRUCTIONS
• •
• •
• 3::
::
:Remove the protective film avoiding
to touch the adhesive tape with your
hands. Proceed by sticking the antenna
on the window and pressing uniformly
on its whole surface to get a perfect
adhesion.
••
••
•1: Choose the best mounting position by following the drawing below.
• •
• •
• 2::
::
:Morever, we suggest to clean carefully
the glass surface and to proceed with the
installation at a temperature of 20oC or
higher.
Min.