SK SATO SK-L751-1 User manual

Instruction Manual
Optional Probes for SK-L751 2-ch Datalogger
Thank you for purchasing the SK-L751 Series Optional Probes.
This product is designed to measure temperature and humidity by connection with SK-L751 2-ch
Datalogger. Do not use it for other purposes.
Read this manual thoroughly before using and keep the manual in a safe place for future references
whenever necessary.
Names of Parts
1. Model SK-L751-1 Probe (plug-in type)
(1) Sensor
(2) Connector
2. Model SK-L751-2 Probe (with-sensor-cord type)
(1) Sensor
(2) Sensor cord
(3) Connector
Installing Probes
Install the temperature probe as the drawing
Insert the connector of the probe straight into the sensor connector
of the Datalogger and firmly tighten the sensor-nut.
Notes: 1. Be sure to connect the probe to CH 1. If the probe is connected to CH 2 without using CH 1,
the probe can measure the temperature; however the measured values cannot be logged.
2. Waterproofness is effective only when both channels are connected with SK-L751-2 probes. When
SK-L751-2 probe is connected to CH1 only, put the sensor cap to CH 2 for making the unit
waterproofness.
Safety Precautions
To use the probes safely, follow the precautions below.
・Model SK-L751 plug-in type probe is not waterproof. Do not let the probes to get wet.
・Never drop the probe or knock it over.
・Measuring temperature outside the measurable range may cause malfunctions.
・Never disassemble or modify the sensors to avoid any malfunctions.
・Do not modify, forcibly pull, bend or tie the sensor cord. Placing heavy objects on the sensor cord or
heating it will also damage the cord.
For a repair or a calibration, contact us or the retailer from which the Datalogger or probe was purchased.
②
①
①
②
③

Specifications
Model
SK-L751-1 Plug-in type
SK-L751-2 With-sensor-cord type
Cat. No.
No. 8810-01
No. 8810-02
Sensor
(Temp.)
Thermistor
Measuring range
(Temp.)
–10 to 60°C
–40 to 80°C
Accuracy
(Temp.)
±0.5°C
Waterproof property
----------
IP65 JIS C 0920 compliance
(When probe is connected with main unit)
Storage ambient
–10 to 60°C, lower than 85%rh (no condensing)
Materials
Sensor unit
PC
SUS304
Connecting part
PVC resin
PVC resin
Cord
---
PVC resin
Dimensions
Sensor unit
Ø11 x 60(H) mm
Ø3.3 x 13(L) mm
Connecting part
Ø9 x 30(L) mm
Ø12 x 40(L) mm
Cord length
---
1.6 m
Weight
9 g
23 g
Accessory
Test result, English instruction manual
WARRANTY POLICY
Our products are warranted to be free from defects in materials and workmanship for a period of one year from date of
delivery. If repair or adjustment is necessary and has not been the result of abuse or misuse within the
one-year-period, please return the units on - Freight Prepaid - basis and correction of the defect will be made without
charges. We alone will determine if the product problem is due to deviations or customer misuse.
Out-of-warranty products will be repaired on charge basis.
Warranty during transportation
The warranty during transportation only applies to the products that we arrange the shipment. The case that the
products had been purchased in domestic and were sent to overseas by the purchaser is out of warranty.
Return of items
Authorization must be obtained from us before returning items for any reason. When applying for authorization, please
include data regarding the reasons the items are to be returned.
S11E
3-4, Kanda-kajicho, Chiyoda-ku, Tokyo 101-0045 JAPAN
URL: http://www.sksato.co.jp/english/