Skoda AUTORADIO BLUES - 03-10 User manual

SIMPLY CLEVERSIMPLY CLEVERSIMPLY CLEVER
www.skoda-auto.com
Autorádio Blues
Fabia, Roomster anglicky 03.10
S00.5610.74.20
5J0 012 095 CM
ŠkodaAuto
CAR RADIO BLUES

Contents 1
Contents
General information . . . . . . . . . . . . . . . . .
Equipment overview . . . . . . . . . . . . . . . . . . . . . . . . . .
Important information . . . . . . . . . . . . . . . . . . . . . . . .
Anti-theft protection . . . . . . . . . . . . . . . . . . . . . . . . . .
Basic setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Radio mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CD player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using the system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2
2
2
3
3
4
6
6
s5ss.8.book Page 1 Friday, October 15, 2010 12:42 PM

General information2
General information
Equipment overview
Control button
−Switching radio on and off (press)
−Volume control (rotate)
Control button to activate the function Scan
Button to activate the radio mode
Button to activate the play function of audio sources
Buttons
−manual station finding, select the track in CD mode (press briefly)
−fast station finding, fast forward/reverse in the CD mode (press for a long
period of time)
Button to activate the reception of traffic reports
Button to call up the menu settings of the parameter for radio or CD player
Function keys
−store and select the RDS station
−Enter code
−Call up the Stop menu
Button for adjusting the sound
CD case
CD - eject button
Explanation of symbols
items of equipment which are marked in such a way are only installed as standard
on certain models or are supplied as special equipment.
End of a section.
The section is continued on the next page.
Important information
Warranty
The equipment warranty terms and conditions also apply for new vehicles.
After the expiration of the warranty, a piece of equipment in need of repair will be
replaced with a reconditioned, original item with spare part warranty. It is, however, a
precondition that the housing has not been damaged and no unauthorised attempts
have been made to carry out repairs.
Note
Damage within the meaning of the warranty must not be the result of improper
handling of the system or from unprofessional repair attempts. It is also essential that
there is no external damage.
Device operation
The unit should only be used, if the traffic situation permits it.
The volume settings must be selected in such a way that audible signals from the
outside, e.g. a Martins horn from utility vehicles (police cars, ambulances and fire
brigade), can be heard at all times.
WARNING
Please concentrate fully at all times on your driving! As the driver you are fully
responsible for road safety. Only use the functions of the radio in such a way
that you are always in full control of your vehicle in all traffic situations!
Using the display
Carefully handle the display because dents and scratches can occur through pressure
of the finger or contact with sharp objects.
A
1
A
2
A
3
RADIO
A
4
MEDIA
A
5


A
6
TP
A
7
MENU
A
8
A
9

A
10
A
11
s5ss.8.book Page 2 Friday, October 15, 2010 12:42 PM

General information 3
The display can be cleaned with a soft cloth and finger marks can be wiped away with
pure alcohol.
Note
Do not use solvent such as turpentine or petrol as they will corrode the display
surface.
Anti-theft protection
Anti-theft coding
Your radio is equipped with a convenience coding. If the radio is being operated for the
first time, the safety code is not only stored in the radio but also in the vehicle.
After disconnecting and reconnecting the battery, first of all switch on the ignition and
then the radio.
If you wish to install the radio in another vehicle, the safety code must be entered. In
this case, please do not hesitate to contact a Škoda Service Partner or a Škoda importer.
As the unit only functions after entering the safety code, this practically excludes its use
after a theft - a contribution to increased anti-theft safety.
Note
The code is stored in the instrument cluster. This ensures that it is automatically
decoded (convenience coding). Manual input of the code is normally not necessary.
Enter code
– Switch on the radio if the ignition is on. SAFE is displayed and then 1000.
– Enter the safety code using the function keys - .
– Confirm the safety code by pressing down on the function key .
If you have confirmed a wrongly entered code, you can repeat once again the entire
process.
If the code number is entered incorrectly for the second time, the unit will be blocked
for approx. one hour. It is possible to enter again the safety code after one hour has
expired, when the unit and the ignition have been switched on.
The cycle - two attempts, blocked for an hour - will continue to apply.
Basic setting
Switching the unit on and off
– The system is switched on or off by pressing the control button .
If the key is pulled out of the ignition lock while the unit is switched on, the unit will
switch off automatically. You can switch on the unit again by pressing the control
button . If the ignition is switched off, the unit (discharge protection of the vehicle
battery) switches off automatically after approx. one hour.
If you have switched off the radio by withdrawing the ignition key, the radio switches
on again once the ignition is on.
Tone settings
– Press the button repeatedly to select the desired parameter.
– Set the desired value by turning the rotary/push knob .
You can select between the following parameters:
•TRE - Treble setting;
•BAS - Bass setting;
•BAL - setting of the volume ratio between the left and the right side;
•FAD* - setting of the volume ratio between the front and the rear.
Setting the special functions
– Press the button afterwards select the function key SET. You activated the
Setup menu.
1
4
6
A
1
A
1

A
2
MENU
s5ss.8.book Page 3 Friday, October 15, 2010 12:42 PM

General information4
– You can select individual functions of the menu by pressing the function keys.
– Set the desired value by pressing the button or .
SKM (SEEK MODE)
•ALL - stops the station finding on all available stations;
•PRESET - stops the station finding on the stored stations.
VOL
Your radio stores the last volume set before switching off. If the value is higher, the
volume is reduced to the value of the parameter ON VOLUME after switching on the
radio again.
GAL (GALA)
Your radio increases automatically its volume with the increasing vehicle speed. A
higher setting value results in a stronger volume increase.
DIS (DISPLAY)
Set the level of the backlighting for the display.
PHONE*
If your vehicle is equipped with a handsfree system, the monophone play function of
the mobile phone calls is carried out via the loudspeakers of the vehicle.
PDC AT*
If your vehicle is equipped with “parking aid”, the volume is automatically decreased
to a pre-defined value, when the “parking aid” is active.
•PDC AT0 - no volume restriction;
•PDC AT1 - restricts the volume to a middle level;
•PDC AT2 - restricts the volume to a low level;
•PDC AT3 - Mute.
AUX*
Setting of the input sensitivity AUX VOL LEVEL:
•AUX VOL LEV 1 - high level, used in particular for notebooks;
•AUX VOL LEV 2 - middle level, used for cassettes or CD player;
•AUX VOL LEV 3 - low level, used for MP3 player;
Note
Each setting change is stored by changing to another menu point.
Radio mode
Waveband switch-over
Your radio is equipped with FM and AM wavebands.
In the ranges FM1/FM2 and AM1/AM2 there are each 6 memory spaces available, in
order to change, press the button briefly.
The process of searching for and storing the radio stations
Manual search
– Search the frequency of the desired radio station by turning the control button .
Automatic station finding
– The radio searches for the next radio station in the selected waveband by pressing
the button or briefly.
Function SCAN
– The radio stations of the current waveband are briefly played (10 seconds) by
pressing the control button or by pressing the button and tapping the
function key SCN afterwards.
– This function is ended by pressing the button once again and the current station
is replayed.
Function AS
– Press the button and then the button AS. An automatic station finding is
started during which the 6 stations with the strongest signal in the memory level
FM1 and/or AM1 are stored.


RADIO
A
2


A
2
MENU
A
2
MENU
s5ss.8.book Page 4 Friday, October 15, 2010 12:42 PM

General information 5
Store station
– After selecting the radio station, hold the station key , on which it should be
stored until it briefly switches to mute and a brief signal sounds.
RDS functions
Certain radio stations transmit additional text information - designated as radio text.
Note
•The text information must not be available to all radio stations.
•Depending upon the quality of the received signal, the radio needs a specific time,
in order to correctly read all the illustrated characters.
Traffic information function
Activating and deactivating the traffic reports
Press the button , TP appears in the display. If a set radio station does not transmit
a traffic report, NO TP appears on the display, and the radio searches for a station
which transmits the traffic report. TP SEEK is displayed on the display.
If no radio station which transmits the traffic reports is found, NO TP is shown on the
display.
An incoming traffic report will automatically interrupt CD playback. INFO and Station
name is shown on the display. At the end of the traffic report, the radio automatically
returns to the original play function.
If you wish to deactivate the traffic information, press once again the button , TP
goes out on the display.
A
8
TP
TP
s5ss.8.book Page 5 Friday, October 15, 2010 12:42 PM

CD player6
CD player
Using the system
Inserting the CD
– Press the button , in order to select the source for the play function: CD
(internal CD drive), EXT (CD changer, if it is connected to the radio) or AUX.
– Carefully insert a CD into the CD case until it is automatically drawn in. The play
function begins automatically.
Operating the CD player
Select track
– Press the button or during the play function of the CD, in order to select the
previous and/or the next title.
– Press the button or longer for fast replay of the track (reverse or forward). The
play function is continued after releasing the button.
– Press the relevant station key (valid for MP3 data) for scrolling in the folders or
in the play lists (if they are present on the CD).
Function SCAN
– Press the button , in order to scroll through the CD. The first 10 seconds of each
title are played.
– In order to return to the normal mode, press once again the button .
– Press the button or if you wish to select the previous or the following track.
End the play function of the CD
– In order to end the play function of the CD and to activate the radio, press the
button .
Ejecting CD
– Press the button , the Cd is ejected.
Display of additional information (MP3 data)
In the display, you can select the display of additional information via the MP3 data
using the function key INF.
Note
•If the ejected CD is not removed, it is drawn in again for safety reasons.
•If the radio is functioning in the TP mode before changing to the CD mode, the play
function of the CD is interrupted during the traffic reports and the unit switches over
to the radio mode. After the traffic reports have ended, the unit switches back once
again to the CD mode.
Replay the tracks in random order
– Select a function of the MIX menu with the help of the station keys.
MIX
Play function of titles in random order.
•MIX OFF - the function of the menu is switched off;
•MIX CD - Plays the tracks on a CD in random order;
•MIX FLD - Play function of titles in random order in a certain (folder);
•MIX PLS - Play function of the playlist (folder of selected tracks from individual
folders, which is stored on the CD). Is only displayed when a playlist is created for the
replayed CD.
General information for MP3 operation
Requirements for the MP3 data and data carrier
•CD-ROM, CD-R, CD-RW with a capacity of 650 MB and 700 MB.
•The CDs must correspond to the ISO 9660 Level 2 standard as well as the Joliet data
system (single and multi-session).
•Data names must be no longer than 64 characters.
MEDIA
A
10




A
8
A
2
A
2


RADIO
A
11
s5ss.8.book Page 6 Friday, October 15, 2010 12:42 PM

CD player 7
•The list structure is restricted to a depth of 8 list levels.
•The name of the artist, the album and the title of the reproduced MP3 data can be
shown as ID3 tag, providing this information is available. The list and data name will be
displayed if there is no ID3 tag.
•Playlists are not supported.
Bit rate (data flow per time unit)
•The system supports MP3 data with bit rates of 32 to 320 KB/s as well as MP3 data
with variable bit rates.
•The indicated playing time data with variable bit rates is not reliable.
Information on how to use a CD
CD to jump
Uneven road surfaces and strong vibrations may cause the CD to jump.
Formation of condensation
When it is cold and after rain showers, moisture can deposit in the CD drive (conden-
sation). This can effect the CD jump or impair the play function. In such cases wait until
the moisture has dissipated.
Notes for the care of the CDs
If a CD is soiled, please never clean the CD in the direction of a circle but rather from
inside to outside with a soft lint-free cloth. In case of severe layers of dirt we recom-
mend to clean the CD with a commercially available CD cleaner. Also in this case do
not clean the CD in the direction of a circle but rather from inside to outside and then
let it dry off.
Overheating protection
If the temperature in the unit exceeds 85°C, the play function of the CD is ended for
safety reasons.
Caution
•Never use liquids such as gasoline, paint thinner or disk cleaner, otherwise the
surface of the CD could get damaged!
•Never expose the CD to direct sun rays!
•Please never write or affix the CD!
Note
Dirt or damage of a CD can lead to difficulties when “reading” the information. The
difficulty in reading the error depends on the dirt or on the severity of the mechanical
damage. Severe scratches cause reading errors which can make the CD jump or “get
stuck”. All CDs must be treated carefully and always be stored in a protective case.
External sources*
Input AUX-IN
– The input for external audio sources AUX-IN is located under the armrest of the
front seats.
– Activate the AUX-IN input by pressing the button and by subsequently
pressing the function key .
– External audio sources, which are connected to the AUX-IN input, cannot be oper-
ated via the radio.
It is possible to play back external audio sources via the loudspeakers of the radio in
the vehicle.
You can select another audio source on the radio at any time. As long as the external
audio source is not switched off, it remains always active in the background.
Please refer to the Owner's manual of the respective manufacturer for the operation of
the external audio source.
Adjust the play function volume of the external audio source
The play function volume of the external audio source can be changed via the volume
control on the radio.
Depending on the connected audio source, the output volume on the external audio
source can be changed.
You can also change the input sensitivity of the external audio source page 4, in
order for the play function volume of the external audio source to adapt to other audio
sources or to avoid distortions of the play function volume.
MEDIA
AUX
s5ss.8.book Page 7 Friday, October 15, 2010 12:42 PM

CD player8
Adapter
A 3.5 mm jack plug is required to connect external audio sources via the AUX-IN input.
If the external audio source does not have this jack plug, you must use an adapter.
We recommend that you purchase an adapter for connecting the USB devices, the
devices with Mini USB output or an iPod, at an authorised Škoda Service Partner.
Conditions for proper connection
•Only USB devices with the specification 2.0 can be connected.
•The version of the file allocation table FAT (File Allocation Table) of the connected
device must be FAT16 (< 2 GB) or FAT32 (> 2 GB).
•In order to replay from a unit with a hard disk (HDD) which includes a large data
volume, it can lead to a time delay when reading in the overview of the music data.
•In order to replay from a unit, which includes a complicated folder structure, it can
lead to a time delay when reading in the overview of the music data.
•The folder structure in the connected unit must not exceed a depth of 8 levels. One
folder must not contain more than 1000°data.
•A USB extension cable or USB distributor (HUB) must not be used to connect the
unit.
WARNING
•On no account place an external audio source on the dash panel. You could
make sudden manoeuvres in the passenger compartment and injure the occu-
pants.
•On no account place an external audio source close to the airbags. You could
be thrown back in the passenger compartment by the airbags being deployed
and injure the occupants.
•You must not hold the external audio source in the hand or on the knees
while driving. You could make sudden manoeuvres in the passenger compart-
ment and injure the occupants.
•Always guide the connection cable of the external audio source in such a
way that is does not restrict you when driving.
Caution
The AUX-IN input must only be used for audio sources!
Note
•If an external audio source is connected via AUX-IN, which is equipped with an
adapter for external power supply, it can occur that the audio signal is interrupted. This
depends on the quality of the adapter which is used.
•The loudspeakers in the vehicle are matched to a power output of the radio of
4x20 W.
•For the equipment sound system*, the loudspeakers are matched to a power
output of the amplifier of 4x40°W + 6x20 W.
s5ss.8.book Page 8 Friday, October 15, 2010 12:42 PM

Notes 9
s5ss.8.book Page 9 Friday, October 15, 2010 12:42 PM

Notes10
s5ss.8.book Page 10 Friday, October 15, 2010 12:42 PM

Notes 11
s5ss.8.book Page 11 Friday, October 15, 2010 12:42 PM

SIMPLY CLEVERSIMPLY CLEVERSIMPLY CLEVER
www.skoda-auto.com
Autorádio Blues
Fabia, Roomster anglicky 03.10
S00.5610.74.20
5J0 012 095 CM
ŠkodaAuto
CAR RADIO BLUES

Škoda Auto pursues a policy of constant product and model development. We trust
that you will understand that changes to models in terms of shape, equipment and
engineering, may be introduced at any time. The information about scope of delivery,
appearance, performances, dimensions, weight, fuel consumption, standards and
functions of the vehicle is only correct at the time of publication. Certain items of
equipment are only supplied later on (information given by authorised Škoda Service
Partners) or are only envisaged for particular markets. It is therefore not possible for
legal claims to be made based on the data, illustrations and descriptions contained in
this Owner's Manual.
Reprint, reproduction or translation, either in whole or in part, is not permitted without
the written consent from Škoda Auto.
Škoda Auto expressly reserves all rights relating to copyright laws.
We reserve the right to make changes to this document.
Issued by: ŠKODA AUTO a.s.
© ŠKODA AUTO a.s. 2010
s5ss.8.book Page 12 Friday, October 15, 2010 12:42 PM