Skoda Infotainment Radio Blues User manual

www.skoda-auto.com
Blues
Infotainment anglicky 05.2013
S00.5614.13.20
5E0 012 149 CT
SIMPLY CLEVER
Infotainment Radio Blues
Owner's Manual

Structure of this Owner's Manual
(explanations)
This Owner's Manual has been systematically designed to make it easy for you to
search for and obtain the information you require.
At the beginning of this manual you will find a table of contents where all the top-
ics described are arranged sequentially. At the end of this manual you will find an
alphabetical index.
Direction indications
All direction indications such as “left”, “right”, “front”, “rear” relate to the direction of
travel of the vehicle.
Explanation of symbols
Denotes the end of a section.
Denotes the continuation of a section on the next page.
® Denotes a registered trademark.
Examples of the information listed in the Owner's Manual
Press the SETUP → Sound button.
This information indicates that you must first press the SETUP button and then se-
lect and confirm the Sound menu.
The “→” symbol indicates the next step.
Example of the menu, the available menus, menu items or functions.
■xyz - the first menu level
■xyz - the second menu level
■xyz - the third menu level
■xyz - the first menu level
Notes
WARNING
The most important notes are marked with the heading WARNING. These
WARNING notes draw your attention to a serious risk of accident or injury.
CAUTION
A Caution note draws your attention to the possibility of damage to your vehicle
(e.g. damage to gearbox), or points out general risks of an accident.
Note
A normal Note draws your attention to important information about the operation
of your vehicle.

Preface
You have chosen a ŠKODA vehicle, which is fitted with an Infotainment Radio Blues (hereafter called the
unit) – we thank you for your confidence in us.
The new operating concept allows you to make vehicle settings and to operate electronic systems centrally
from the device.
Please read this Owner's Manual carefully, because the operation in accordance with these instructions is a
prerequisite for proper use of the unit.
Please note that these instructions are meant only as an addendum to the information presented in the
Owner's Manual of your vehicle. Therefore, they can be used only in conjunction with the latest manual for
this vehicle. For a detailed description of some functions listed in these instructions, see the Owner's Manual
for your vehicle.
If you have any questions about your device, please contact a ŠKODA Partner.
Your ŠKODA AUTO a.s. (hereinafter referred to as ŠKODA)

Table of Contents
Introductory information
Important notes 3
Description and operation of the device 4
Using Infotainment 5
Device setup 8
Audio
Radio 12
Media 14
Vehicle systems
Vehicle settings 19
Index
2Table of Contents

Introductory information
Important notes
Introduction
This chapter contains information on the following subjects:
Declaration of conformity 3
Warning statement 3
Component protection 3
This Owner's Manual describes all possible equipment variants without identify-
ing them as special equipment, model variants or market-dependent equipment.
Consequently, this vehicle does not need to contain all of the equipment compo-
nents described in these operating instructions.
The level of equipment of your vehicle refers to your purchase contract of the ve-
hicle. For more information, please contact your local ŠKODA retailer.
The illustrations in this manual can differ in minor details from your vehicle; they
are only intended for general information.
WARNING
■Concentrate fully at all times on your driving! As the driver you are fully re-
sponsible for the operation of your vehicle.
■Only use the device in a way that ensures that you are in full control of your
vehicle in every traffic situation - there is a risk of accident!
■Adjust the volume to ensure that acoustic signals from outside, e.g. sirens
from vehicles which have the right of way, such as police, ambulance and fire
brigade vehicles, can be heard at all time.
■High volumes can cause hearing damage.
Note
Excessively high volumes can cause sound resonance in the vehicle. 
Declaration of conformity
First read and observe the introductory information and safety warn-
ings on page 3.
ŠKODA AUTO a.s. hereby declares that the ŠKODA Infotainment systems meet the
basic requirements and additional provisions of Directive 1999/5/EC.

Warning statement
First read and observe the introductory information and safety warn-
ings on page 3.
FCC § 15.19 Labelling requirements
This device complies with part 15 of the FCC Rules and Industry Canada license-
exempt RSS standard(s). Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesired operation.
FCC § 15.21 Information to user
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
INDUSTRY CANADA Statements
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence. L'exploitation est autorisée aux deux
conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2)
l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, męme
si le brouillage est susceptible d'en compromettre le fonctionnement. 
Component protection
First read and observe the introductory information and safety warn-
ings on page 3.
Some electronic control units are factory-equipped with component protection.
The component protection was developed as a protection mechanism for: 



3
Introductory information

›impairment of factory- or garage-fitted control units after installation in another
vehicle (for example, after a theft);
›impairment of components operated outside of the vehicle;
›the possibility of a legitimate installation or change of control units for repairs
at a ŠKODA specialist garage.
When component protection is activated, the following message appears on the
device display screen: Component theft protection - Warning: partial malfunc-
tion! Please switch on the ignition.
If the component protection does not activate by switching on the ignition,
please contact a ŠKODA specialist garage. 
Description and operation of the device
Introduction
This chapter contains information on the following subjects:
Description of the device 4
Switching the device on/off 5
Adjusting the volume 5
First and foremost, pay attention to the safety instructions » page 3, Important
notes.
Description of the device
Fig. 1 Description of the device
First read and observe the introductory information given on page 4.
 - Switch device on/off, adjust volume
Menu button for calls and confirmations
Function keys (the functions for these keys are described in the relevant
chapters)
Display
RADIO - Radio menu » page 12
MEDIA - Media menu » page 14
MUTE - Mute
SETUP - Device settings » page 8
CAR - Settings for the vehicle systems » page 19
BACK - Return to higher-level menu
  - Backward and forward menu navigation (the key functions are descri-
bed in the relevant chapters) 

1
2
3
4
5
6
7
8
9
10
11
4Introductory information

Switching the device on/off
First read and observe the introductory information given on page 4.
›Press the  knob to switch the device on or off.
When the device is switched on, the audio source and operating mode that were
active before switching off the device will be restored.
If the vehicle key is pulled out of the ignition lock while the unit is switched on,
the unit will switch off automatically. After switching on the ignition, the unit is
turned on automatically.
If the device was switched off using the  knob, then the device will not switch
on automatically after switching on the ignition.
If your vehicle is fitted with the KESSY system, the device will switch off automat-
ically after the engine has been turned off and the door opened.
When the ignition is switched off, the system switches off automatically after ap-
prox. half an hour (discharge protection of the vehicle battery). 
Adjusting the volume
First read and observe the introductory information given on page 4.
Increase volume
›Turn the  knob to the right.
Decrease volume
›Turn the  knob to the left.
Muting
›Press the MUTE button
or
›Set the volume to 0 using the  knob.


Note
■The change in volume is displayed on the device display screen.
■When the sound is muted, the  symbol appears in the display.
■Some connected sources allow the output volume to be changed directly at the
source. 
Using Infotainment
Introduction
This chapter contains information on the following subjects:
Device display screen 6
Display in the instrument cluster 6
Operating with the lever 7
Operating using the multifunction steering wheel - Audio menu 7
First and foremost, pay attention to the safety instructions » page 3, Important
notes.
5
Introductory information

Device display screen
Fig. 2 Displays
First read and observe the introductory information given on page 5.
Display of menus, menu items and functions
Currently selected menu item
Previous menu item
Next menu item
Higher-level menu
Function with “checkbox”
› - Function is switched on.
› - Function is switched off
Function of the menu/menu item
Selecting menu/menu item
Select by turning the menu knob 2» Fig. 1 on page 4.

A
B
C
D
E
F
Confirming menu/menu item
Confirm by pressing the menu button 2.
Confirming function of menu/menu item
Confirm the function of menu/menu item F » Fig. 2 by pressing the correspond-
ing function key 3 » Fig. 1 on page 4.
Returning to higher-level menu
Return by pressing the BACK button.
Switching function on/off with “checkbox”
Switch the function on/off by pressing the menu button 2.
Note
■Greyed out menus or menu items are not enabled or available.
■For some menus or menu items, the current setting is displayed, e.g. Distance:
km or Distance: mi.
■If the device is not currently being used, the display will return to the higher-
level menu after a few seconds. 
Display in the instrument cluster
Fig. 3 Display in the instrument cluster, colour/black and white
First read and observe the introductory information given on page 5.
Main menu points
■Audio » page 12
■Vehicle » page 19 

6Introductory information

■Multifunction display » page 23
■Assist systems » page 20
Using menu items depending on vehicle equipment
■with the control lever - » page 7
■with the multifunction steering wheel - » page 7
Note
The Audio menu item is only displayed if the vehicle is equipped with a factory-
fitted Infotainment radio. 
Operating with the lever
Fig. 4
Buttons on the control lever
First read and observe the introductory information given on page 5.
The menus and associated menu items can be operated in the instrument cluster
display as follows, using the lever.
Press and hold - open main menu
Press briefly - select individual menu items or menus
Press briefly - select menu item or menu 

A
A
B
Operating using the multifunction steering wheel - Audio menu
Fig. 5 Multifunction steering wheel: Control buttons and dials
First read and observe the introductory information given on page 5.
The individual menu items in the Audio menu can be operated via the multifunc-
tion steering wheel on the instrument cluster display. 

7
Introductory information

Control buttons and dials
Button/
dial Action Radio Media
1Press briefly Change source, change frequency band
1Press and hold Switch between the Radio and Media operating modes, and open the last context status (e.g. the last radio station or track to be
played)a)
2Press briefly Switch sound off or onb)
Switch track playback off or on
2Turn upwards Increase volume of the current source
2Turn downwards Reduce volume of the current source
3Press briefly
Switch to the next saved radio station in the station list
or to the next saved radio station in the preset listc)
Interrupt traffic report
Switch to the next tracka)
3Press and hold Interrupt traffic report Fast forwarda)
4Press briefly
Switch to the previous saved radio station in the station list
or to the next saved radio station in the pre-set list
Interrupt traffic report
Switch to the previous track within 5 seconds of title playback,
switch to start of track after 5 secondsa)
4Press and hold Interrupt traffic report Fast rewinda)
5Press briefly Interrupt traffic report without function
5Turn upwards Show list of available stations
Scroll upwards Switch to the previous tracka)
5Turn downwards Show list of available stations
Scroll downwards Switch to the next tracka)
6Press briefly Open main menu in the instrument cluster display
a) Does not apply for AUX.
b) The sound is turned on again by pressing dial 2 or turning dial 2.
c) Context-dependent selection.
Note
■If the ignition and the side light are switched on, the buttons and dials on the
multifunction steering wheel will also be illuminated.
■The set of loudspeakers in the vehicle is adapted to the 4 x 20-W Infotainment
power output.
■The buttons with the  symbol for voice control and  for the telephone are
not supported by the device. 
Device setup
Introduction
This chapter contains information on the following subjects:
Main menu 9
Sound setup 9
Radio settings 9 
8Introductory information

Media settings 10
Device system setup 10
First and foremost, pay attention to the safety instructions » page 3, Important
notes.
Main menu
Fig. 6 Main menu SETUP
First read and observe the introductory information given on page 8.
Opening the main menu for unit setup
›Press the button SETUP .
Menu items in the main menu for device setup
■Sound - Sound settings » page 9
■Radio - Radio settings » page 9
■Media - Media settings » page 10
■System - System settings » page 10 
Sound setup
First read and observe the introductory information given on page 8.
›Press the SETUP → Sound button.
■Bass - Bass setting
■Mid - Mid-range setting
■Treble - Treble setting


■Balance - Sets the balance between the left and right
■Fader - Sets the balance between the front and the rear
■Volume - Volume setting
■Maximum switch-on volume - Volume after switching on
■Traffic announcements - Volume setting for the Traffic programme alerts (TP)
■Volume adjustment (GALA) - Speed-dependent volume increase
■AUX volume - Sets playback volume via an external source
■Quiet - Low volume
■Medium - Medium volume
■Loud - High volume 
Radio settings
First read and observe the introductory information given on page 8.
›Press the button SETUP → Radio.
■Radio text - Switches radio text display on/off
■Alternative frequency (AF) - Switches on/off the search for alternative frequen-
cies for the station currently being listened to
■Arrow keys - Sets the station selection function in RADIO mode
■Station list - Switches all stations currently in range for the selected fre-
quency band
■Preset list - Switches only stored stations in the selected frequency band
■RDS regional - Switches the automatic tracking of related regional stations on/
off
■Fixed - The selected regional station is kept permanently (another regional
station must be set manually if signal is lost)
■Automatic - Automatic tracking of regional stations (the radio will automati-
cally switch to another available regional station if reception is lost in the re-
gion in question)
■PTY filter - Selects radio stations based on station topics
■Off - Switches off
■News - News
■Music - Music
■Sport - Sports
■Culture - Culture
■Special - Other 

9
Introductory information

■Station list sort - Sorts the station list
■Default - based on programme identification (PI code)
■A - Z - In alphabetical order and also based on the frequency number (if the
station name changes during the programme, it can be displayed just at the
end of the list)
■Name of station - Displays the station name
■Variable - Allows changes to the station name
■Fixed - The station name is fixed (for the A-Z listing)
■Delete presets - Deletes the stored stations
Note
■The Radio Data System (RDS) is used to transfer additional information. The
RDS enables program identification, program type identification (PTY), the recep-
tion of traffic reports (TP) or automatic station tracking, for example. If there is
sufficient reception, RDS-compatible radio stations will be displayed by station
name rather than station frequency.
■The alternative frequency (AF) function ensures that the best receivable fre-
quency for the selected station is set automatically.
■In countries where the Radio Data System (RDS) function is not adequately
supported, the radio may not be fully functional. We therefore recommend
switching off the RDS Regional setting as well as the Alternative frequency (AF)
setting, if applicable. Otherwise, these settings can affect the functionality of the
radio. 
Media settings
First read and observe the introductory information given on page 8.
›Press the button SETUP → Media.
■Activate AUX - Input on/off switches activation of AUX
■Mix/repeat including subfolders - Switches on/off playback of the tracks in Mix
and Repeat modes including subfolders
■Display ID3 tags - Switches on/off display of the artist, album and track name in
the device display screen1) 

Device system setup
First read and observe the introductory information given on page 8.
›Press the button SETUP → System.
■Language - Defines the menu language for displays
■Time/date - Time and date settings
■Time - Time settings
■Date - Date settings
■Summer (DST) - Switches summer time adjustment on/off
■Time format - Sets the time format
■24 h
■12 h
■Date format - Sets the date format
■DD.MM.YYYY - Day - Month - Year
■YYYY-MM-DD - Year - Month - Day
■MM-DD-YYYY - Month - Day - Year
■Units - Sets the units of measurement
■Distance - Distance units
■km - Kilometres
■mi - Miles
■Temperature - Temperature units
■°C - Degrees Celsius
■°F - Degrees Fahrenheit
■Volume - Volume units
■l - Litres
■gall. (UK) - Gallons (UK)
■gall. (US) - Gallons (US)
■Speed - Speed units
■km/h - Kilometres per hour
■mph - Miles per hour
■Consumption - Consumption units
■l/100 km - Litres per 100 kilometres
■km/l - Kilometres per litre
■mpg (US) - Miles per gallon (US)
■mpg (UK) - Miles per gallon (UK) 

1) Regardless of the setting, the ID3 tag is always displayed in the Audio menu in the instrument cluster
display.
10 Introductory information

■Gas consumption - Gas consumption units
■kg/100 km - Kilograms per 100 kilometres
■km/kg - Kilometres per kilogram
■Display - screen setting
■Brightness - Adjusts the brightness of the screen
■Brightest - brightest level
■Brighter - brighter level
■Medium - medium level
■Darker - darker level
■Darkest - darkest level
■Clock in standby mode - Time display on the screen when the ignition is
switched on and the device switched off
■Remove USB device safely - Safe removal of the USB device1)
■Factory settings - Reset to factory settings
■All - All settings
■Sound - Sound settings
■Radio - Radio settings
■Vehicle - Vehicle system settings
■Media - Media settings
■System - System settings
■Driving profile - Choice of driving mode
■Display off - Activates/deactivates the screen's power-saving mode, where the
screen is black (the screen can be switched on again by pressing any key)
■System information - Displays system information
■Versions data - Displays version information
■Device part number: xyz - Part number of device
■Hardware: xyz - Hardware used
■Software version: xyz - Software version
■Copyright - Information on licences and copyrights used 
1) If a sound is currently played from the USB data carrier, this function is not active.
11
Introductory information

Audio
Radio
Introduction
This chapter contains information on the following subjects:
Main menu 12
Search for radio stations and store 12
Frequency band and selecting a radio station 13
Switching Traffic programme TP on/off 14
First and foremost, pay attention to the safety instructions » page 3, Important
notes.
Main menu
First read and observe the introductory information given on page 12.
Accessing radio mode in main menu
›Press the RADIO button.
The most recently tuned radio station plays.
Symbols in the display
Symbol Importance
Sound is muted
 Traffic information station
  Station without traffic information
, , ,  Currently selected frequency band and memory bank
a) Radio station is selected based on desired station top-
ic » page 9, Radio settings

Symbol Importance
Radio station from the station list is a station from the
preset list
 Auto-play of available radio stations
a) PTY (programme type) - the programme type refers to the type of the programme transmitted by the
radio station. 
Search for radio stations and store
First read and observe the introductory information given on page 12.
If no memory bank is displayed for the frequency bands,
›press the RADIO button → menu button 2 » Fig. 1 on page 4.
Search options:
■TP - switches traffic programme on/off » page 14
■Manual - Manual station search » page 12
■Scan - Successive play of all receivable stations in the current frequency band or
the current station buttons for five seconds each
■OK - Stops auto-play function at the current radio station
■Skip - Selects another radio station
■Auto store - Automatic station search » page 12
Automatic station search
Press the function key 3 to start an automatic station search. Auto store... is dis-
played on the device display screen when searching and storing.
At the end of the search, the five radio stations with the strongest signal are
stored in the memory bank for the current frequency band.
If radio stations have been stored under the preset buttons, then the station keys
will be overwritten with newly located stations after the automatic station
search.
Manual station search
Turn the menu button 2 or use the / keys in the selected frequency band to
carry out a manual station search.
Briefly press the  or  buttons to go forwards or backwards in the current fre-
quency band. Press and hold the button to stop the search at the next radio sta-
tion to be found. 

12 Audio

Press the function key 3 at the desired memory bank position for the frequency
band to store the selected station.
Saving a radio station
Set the desired radio station and press and hold the corresponding function key
3 until a beep is heard. The station name is displayed above the corresponding
function key 3.
Frequency band and selecting a radio station
Fig. 7 Main menu/selecting the frequency band
First read and observe the introductory information given on page 12.
Selecting a frequency band
Your radio can receive FM (memory bank FM1 and FM2) and AM (Memory bank AM1
and AM2 ) frequency bands.
›Press the RADIO button.
›Press the corresponding function key 3 » Fig. 1 on page 4.
or
›Press the RADIO button repeatedly and select the desired memory bank.
›Press the menu button 2 to confirm the selected memory bank.
Selecting a stored radio station from the preset list1)
›Press the RADIO button.
›Press button  or  in the selected memory bank.
or
›Press the function key 3 under the desired radio station.
Five presets are available in each memory bank.
Selecting a radio station from the station list1 )
›Press the RADIO button.
›Press button  or .
or
›Turn the menu button 2 » Fig. 1 on page 4.
A menu is displayed, showing available stations.
The PTY code 2) is displayed next to the station name. If the station is stored in
the device memory, then the  symbol also appears.
If no station list is available, the device will automatically search for radio sta-
tions.
›Turn the menu button 2 to scroll through the list of available stations.
›Press the menu button 2 to select the displayed channel. 

1) The function is influenced by the setting; see Arrow keys » page 9.
2) PTY (programme type) - the programme type refers to the type of the programme transmitted by the
radio station.
13
Audio

Switching Traffic programme TP on/off
First read and observe the introductory information given on page 12.
›Press the RADIO button → menu button 2 » Fig. 1 on page 4 → TP.
Screen display
The functionality of the traffic monitoring system is indicated on the screen by
the letters .
The display , together with a station name (e.g. in the station or preset list), indi-
cates a traffic station.
While playing in Media mode, the last selected radio station continues to be re-
ceived in the background if it supports traffic information.
If a radio station is set that does not support  traffic reports, then the most ap-
propriate  station is set automatically in the background to continuously receive
traffic reports.
The radio works the same when an  frequency band is selected.
If the radio station does not broadcast traffic reports, or if no traffic stations can
be found (due to a general radio reception interruption, for example), then  is
displayed.
Interrupting/stopping the traffic programme
When the TP traffic programme is being received, Traffic announcement is dis-
played on the device display screen with the following options:
■TP off - Switches off the traffic announcement currently being played
■Cancel - Breaks off the TP traffic programme reception 
Media
Introduction
This chapter contains information on the following subjects:
Selecting source 15
Supported sources and file formats 15
Operation 16

Setting additional functions 17
USB, AUX inputs 17
First and foremost, pay attention to the safety instructions » page 3, Important
notes.
The device allows you to play audio files in various formats and to connect differ-
ent source types » page 15.
When the source has been connected, the device starts to automatically play au-
dio files in alphabetical order.
WARNING
■Never place external sources on the console panel. They could be thrown in-
to the passenger compartment during sudden driving manoeuvres, thereby in-
juring the occupants.
■Never place external sources close to the airbags. They could be thrown into
the passenger compartment when the airbags are deployed, injuring the oc-
cupants.
■Never hold external sources in your hand or on your knees while driving.
They could be thrown into the passenger compartment during sudden driving
manoeuvres, thereby injuring the occupants.
■Always route the connection cable for the external source such that it does
not restrict you when driving.
CAUTION
Do not store any important data on the connected external sources. ŠKODA as-
sumes no responsibility for lost or damaged files or connected devices.
Note
See the owner's manual of the specific manufacturer for instructions on operat-
ing the external source. 
14 Audio

Selecting source
Fig. 8 Main menu/USB operation
First read and observe the introductory information and safety warn-
ings on page 14.
Accessing main menu in media mode
›Press the button MEDIA .
Selecting the audio source
■USB - Changes to an external audio source connected at the USB in-
put1) » page 17
■AUX - Changes to an external audio source connected at the AUX in-
put » page 17
Symbols in the display
Symbol Importance
Sound is muted
/ Repeat track or folder
Random play
,  Currently selected audio source
 Auto-play function for 10 seconds 

Supported sources and file formats
First read and observe the introductory information and safety warnings on page 14.
Audio files
Supported sources
USB devices: USB stick, USB MP3 player, HDD (without special software)
Specifications for USB devi-
ces:
USB 1.x and 2.x or higher, supported by USB 2.x (the speed of data transmission then corre-
sponds to the maximum speed of USB 2.x )
Speedrating of max. 480 Mb/s
Other external sources: Portable playback devices with AUX connection, MTP players 

1) Operating an externally connected audio source is possible with certain restrictions, depending pri-
marily on the type of the connected device.
15
Audio

Audio files
Data system
The version of the FAT (File Allocation
Table)
for the connected device must be in the
following format:
USB stick: FAT16, VFAT, FAT32
Codec type (file formats) MPEG-1/2 (layer 3) Windows Media Audio 7, 8, 9 and 10
File suffix mp3 wma
Playlists m3u; pls; wpl; m3u8; asx
File properties Bitrate: max. 320 kb/s
Sampling rate: max. 48 kHz
Prerequisites and restrictions:
›The device has been tested with most products and media available on the mar-
kets. However, it is possible that some devices, media or files will be unreadable
or unplayable.
›The more files, folders or playlists on one source, the longer it will take to read
the source. It is a good idea to create subfolders with files (e.g. by artist or al-
bum names) in order to save time.
›The name of the artist, the album and the title of the played file can be dis-
played if the information is available as a so-called ID3 tag. If no ID3 tag is avail-
able, only the folder name is displayed.
›WMA (Windows Media Audio) files can only be played if they are not additionally
copyright-protected by DRM (Digital Rights Management). These kinds of WMA
files are not supported by the device.
›In order to ensure high-quality playback, we recommend using compressed MP3
files at a bit rate of at least 160 kb/s. For audio files with variable bitrates, the
indicated remaining playback time does not correspond to the actual remaining
playback time.
›The correct display of country-specific characters (e.g. ID3 tag information) can
not always be guaranteed. 
Operation
First read and observe the introductory information and safety warn-
ings on page 14.
The  and  buttons always affect the audio source currently being listened to,
regardless of the menu being used.

It is also possible to change tracks using the function keys 3 » Fig. 1 on page 4
from within the menu of the audio source currently being played.
A list of function keys 3 is displayed in the menu of the audio source currently
being played after the menu button 2 is turned.
■Play - Plays the current track
■Up - Returns to a higher level
Press on 2 to start playback of the current track or to open the current folder.
Button 
Action Function
Press briefly
Go to the start of the track being played if the track
has been playing for more than 5 seconds
Go to the start of the previous track if the track has
been playing for less than 5 seconds
Press and hold Fast-reverse of the track
Button 
Action Function
Press briefly Go to the start of the next track
Press and hold Fast-forward of the track 
16 Audio

/ function key
Action Function
Press briefly
Play/pause: the playback function is stopped at the
current position and the symbol changes to ; when
pressed again, the playback function will continue
from this position.
Function key 
Action Function
Press briefly
Go to the start of the track being played if the track
has been playing for more than 5 seconds
Go to the start of the previous track if the track has
been playing for less than 5 seconds
Press and hold Fast-reverse of the track
Function key 
Action Function
Press briefly Go to the start of the next track
Press and hold Fast-forward of the track
Function key 
Action Operation
Press briefly Scrolling down in folders
Function key 
Action Operation
Press briefly Scrolling up in folders 
Setting additional functions
First read and observe the introductory information and safety warn-
ings on page 14.
›Press the MEDIA button → menu button 2» Fig. 1 on page 4.

■TP - switches traffic programme on/off
■ - Displays the artist, album and track name from ID3 tag1)
■Repeat - Sets repeat play
■Off - Switches repeat function off
■Track - Repeats the current track
■Folder - Repeats all tracks in folder
■Mix - Random play
■Off - Random play function off
■All - Sets random playback of all tracks on the current audio source
■Folder - Repeats all tracks in folder
■Scan - Consecutive playback of the tracks for 10 seconds
■OK - Stops auto-play function at the current track
■Skip - Selects another track
■Cancel - Changes to the track played originally 
USB, AUX inputs
Fig. 9
USB and AUX inputs
First read and observe the introductory information and safety warn-
ings on page 14.
The USB and AUX inputs are located above the storage compartment at the front
of the centre console » Fig. 9.
The device can be used to play audio files from sources connected via the USB
and AUX inputs, either directly or via a connection cable available from ŠKODA
original accessories. 

1) If there are no artist, album and track names available in the file being played, the folder or file name
is displayed.
17
Audio

Adjusting the playback volume of the source
The playback volume of the source can be adjusted by turning the  knob.
Depending on the connected source, the output volume can be adjusted at this
source » page 9, Sound setup.
AUX input
External audio sources connected to the AUX input cannot be operated from your
device.
The standard 3.5-mm jack plug is used for the AUX input. If the external audio
source does not have this jack plug, you must use an adapter .
USB input
External audio sources connected to the USB input cannot be operated from your
device.
Before removing the USB device, proceed as follows:
›Press the button SETUP → System → Remove USB device safely.
Do not use USB extension cables or adapters. These can impair the function of
the device.
USB hubs are not supported.
The USB input can be used to charge the batteries of most devices that allow
charging via USB.
CAUTION
The AUX input must only be used for audio sources!
Note
■If an external audio source is connected to the AUX input, which is equipped
with an adapter for external power supply, the sound may be impaired. This de-
pends on the quality of the adapter which is used.
■See the owner's manual of the specific manufacturer for operating the external
audio source. 
18 Audio