SKY-HERO AT9 User manual

1
Quick start
Guide Up -> Normal
Mid -> Stabilise
Down -> GPS
Fail safe
( Down = RTH )
Return to home
Flight mode:
Signal power level:
Nose down
Nose up
Throle up
Throle down
Tilt le Tilt right
Nose turn le Nose turn right
Low Mid Hight

Your model is equiped with a DJI NAZA V2 ight controller.
All sengs are done from factory.
Only NAZA leveling and magnetometer calibraon is needed.
Please read and follow the NAZA user manual,
to familiarise to all foncons ( link ).
2
Pre ight check
Verify your propeller orientaon and secure them rm in place.
Please read and refer to your Lile Spyder user manual p: ( 16, 25, 26 )
Use only fresh charged baery in your transmier.
Check your signal transmier power level.
Make a rst 5 min ight, land and check motor temperature.
Check if no screw is coming loose.
Recharge your baery.
Max ight me should be 8’ 30’’
You can program a mer and alarm on your TX, refer to your AT9 user manual
We recommend to not exceed 8 min
To garantee good baery life me
naza v2: hp://download.dji-innovaons.com/downloads/nazam-v2/en/NAZA-M_Quick_Start_Guide_v1.26_en.pdf
Lipo baery user: hp://www.instructables.com/id/Lithium-Polymer-Equee
Lile spyder: hp://sky-hero.com/usermanuals/User-Manual-Lile-Spyder.pdf
User manuals: