SkyLink HU-318 User manual

Setup Guide
HU-318
skylinkhome.com

2
CONTENTS
1. Setup HU-318
1.1 Obtain the IP address of HU-318...............3
1.2 Login HU-318 Main Page.......................... 4
1.3 HU-318 Network Setting............................5
1.4 Setup Portforward......................................6
2. Setup App
2.1 App Download........................................... 7
2.2 App Network Settings................................ 8
2.3 Zone Settings.............................................9
2.4 Device Settings..........................................10
2.5 Scene Settings.......................................... 11
2.6 Timer Settings........................................... 14
3. Operation......................................................... 17
4. Putting Receiver into
Programming Mode..................................... 18
CONTENTS

3
SETUP HU-318
2. Connect the power adaptor to the outlet and to the HU-318 hub
1. Connect the ethernet cable to the HU-318 hub and to your router
3. You will see your IP address as well as the port number on
the HU-318 > 192.168.x.xx:8081
192.168.0.14:8081
192.168.002.036:8081
1.1 OBTAINING THE IP ADDRESS OF HU-318
1.1 SETUP HU-318
Example

4
SETUP HU-318
1.2 SETUP HU-318
3. Click on “Settings” icon
4. Scroll down and click on
“Network Settings”
2. Input the default user name admin and default password admin
1. Open the browser on your desktop and input your IP address
http://192.168.x.xx:8081
1.2 LOGING INTO THE HU-318 MAIN PAGE
admin
admin
Omit the zeros from your IP
address shown on the hub to
the following format:
example
http:192.168.002.036:8081
to
http:192.168.2.36:8081
X

5
1.3 HU-318 NETWORK SETTINGS
1.3 SETUP HU-318
3. Now the HU-318 is rebooting
2. Uncheck the DHCP Client and Click on “Save Cong”
1. Ensure the DDNS Status is OK.
If it states Fail, Check your internet access
“Uncheck”
DDNS Status : OK
SETUP HU-318

61.4 SETUP HU-318
If you want to control your devices/appliances
outside your wi-network, you need to set up
PORT FORWARDING on your Router!
To do this visit http://www.portforward.com and
enter the router brand and model found at the back
of your router, into the search engine.
On the returned page, click on the hyperlink
“Default Guide” and follow the step by step guide.
SETUP HU-3181.4 SETUP PORTFORWARD

72.1 SETUP APP
SETUP APP
2.1 APP DOWNLOAD
3. Run the App 3. Run the App
2. Install the Skylink App 2. Install the Skylink App
1. On your iphone, go to the App Store,
and search “skylink homecontrol”
1. On your smartphone, go to the App
Store, and search “skylink home”

8
2.2 APP NETWORK SETTINGS
2.2 SETUP APP
5. Tap on “Back”
3. Tap on “1” 4. Enter the following information:
1. Tap on “Settings” 2. Tap on “Network Settings”
1
2
3
4
5
6
7
1. Prole: Home
2. IP Address: xxxxx.my.skyhm.net
or
192.168.x.xx (If you didn’t setup DDNS)
3. Port: 8081
4. User name: admin
5. Password: admin
6. Enabled: ON
7. Tap “Save”

92.3 SETUP APP
4. Tap on “Back”
3. Enter Your Zone Name:
eg. Master Room
and Tap on “Rename”
1. Tap on “Zone Settings” 2. Tap on one of the “Unused” buttons
Zone Name:
eg. Master Room, Living Room
Tap on “Rename”
to Save
1
2
SETUP APP
2.3 ZONE SETTINGS

10
SETUP APP2.4 DEVICE SETTINGS
2.4 SETUP APP
6. Tap on the Button you created
7. Put your skylink receiver into
programming mode and Tap on “Learn”
4. Enter Your Device Name and
Tap on “Return”
5. Select either ON/OFF or
No-Dim/Dim and tap on “Add”
1. Tap on
“Device Settings”
2. Tap on
your zone
3. Tap on one of the
“Unused” buttons
Device Name:
eg. Bed Light,
eg. Table Lamp
After Programmed,
Tap on “Home”
To set your skylink
receiver into
programming
mode please refer
to page 18 of
this guide.

112.5 SETUP APP
5. Tap on your “Scene Name:
eg.Movie” 6. Tap on “Zone”
3. Tap on one of the
“Unused” buttons
4. Enter your Scene Name and
tap “Rename”
1. Tap on “Settings” 2. Tap on “Scene Settings”
1
2
Scene Name:
eg. Movie,
eg. Evening
Tap
“Rename”
to Save
SETUP APP
2.5 SCENE SETTINGS

12
2.5 SCENE SETTINGS SETUP APP
2.5 SETUP APP
12. Tap on “Set”
9. Select your Device,
and Tap “Done”
11. Select “% Brightness”
Tap “Done”
10. Tap on “Brightness”
7. Select your zone name
Tap “Done” 8. Tap on “Device”
1
1
1
2
2
2
Select
Zone
Select
Device
eg. Wall Lamp
Select
% Brightness
Tap “Done”
Tap “Done”
Tap “Done”
Select 100% to turn off
dimming function

132.5 SETUP APP
16. Tap icons to control the device,
ON/OFF switch
14. To add more devices to the same scene, repeat scene settings: steps 5-13
15. Tap on “Scene”
13. Set your Device into programming mode
and Tap “Learn” to program
ON OFF
After Programmed,
Tap on “Home”
Tap on “Learn”
1
2
SETUP APP
2.5 SCENE SETTINGS
To set your skylink
receiver into
programming
mode please refer
to page 18 of
this guide.

142.6 SETUP APP
SETUP APP2.6 TIMER SETTINGS
5. Tap on “Return” to Save the name
6. Tap on “Zone”, Select your zone and
Tap “Done” to save
3. Tap one of the “Unused” buttons 4. Enter your Timer Name
1. Tap on “Settings” 2. Tap on “Timer Settings”
Timer Name:
eg. Timer1
eg. NIght
1
2
3
1. Tap “Zone”
2. Select
from list
3. Tap “Done”
to Save

152.6 SETUP APP
SETUP APP2.6 TIMER SETTINGS
12. Tap on the “On/Off” button to
program your action
9. Tap Hour, Select your Hour
from the List and Tap “Done” to Save
11. Slide to activate/deactivate
the Days
10. Tap Minute, Select your Minute
from the List, Tap “Done” to Save
7. Tap “Device”
8. Tap Device, Select your Device
from the List and Tap “Done” to Save
2 2
3 3
1
2
1. Select Device:
eg. Wall Lamp
2. Tap “Done”
to Save
11
1. Tap Hour
2. Tap to Select
Hour amount:
eg.01
3. Tap “Done”
to Save
1. Tap Minute
2. Tap to Select
Minute amount:
eg.00
3. Tap “Done”
to Save

16
2.6 TIMER SETTINGS SETUP APP
2.6 SETUP APP
1. Select
“On” or “Off”
2. Tap “Done”
to Save
17. Timer is now active
15. Tap on your Timer name 16. Tap on Activate Icon
13. Tap on “On” or “Off” depending on
your desired action
14. Tap on the “Add” button
to add your timer
2
1
The above example now has Timer1 Set for:
Wall Lamp to turn ON in Demo Zone,
Monday-Fridays at 1:00am

17
OPERATION
OPERATION
4. Tap on the device you want to control
and use the 4 buttons below to control
3. Tap on the Zone you want to control
1. Tap on the “Zone” button
ON OFF BRI DIM

18
PUTTING RECEIVER INTO PROGRAMMING MODE
PUTTING RECEIVER INTO PROGRAMMING MODE
Mini Screw-In Dimmer
Model: LS-318
Start with dimmer off. Position the slide switch
to the desired operating mode. Power on
(by turning on the light switch or the circuit
breaker). The LED will ash quickly for Regular
On/Off mode, slowly for Flashing Alert mode or
will be solid for Countdown Timer mode. LS-
318 is now in programming mode and will stay
that way for 15 seconds.
On/Off & Dimming Control
Model: MD-318
Start with dimmer off; Power on the dimmer
(by turning on light switch or the circuit
breaker), you will hear a beep from the MD-
318 indicating unit is now in programming
mode and will stay that way for 15 seconds.
Mini Screw-In Dimmer
Model: LX-318
Start with dimmer off. Power on the unit
by turning on the light switch or the circuit
breaker. You will hear a beep. LX is now in
programming mode and will stay that way for
15 seconds.
On/Off Control
Model: MR-318
Start with unit powered off. Power on the unit
by turning on the light switch or the circuit
breaker. Your will hear a beep from the
On/Off control which indicates the unit is in
programming mode and will stay that way for
15 seconds.
Indoor/Outdoor Plug-In On/Off Control
Model: PA-318
On-Off/Countdown Timer Mode:
Start with the load turned off. Press and hold
the ‘SET’ button; Red LED will ash quickly
(release for On/Off mode) and then it will stay
on solid (release for Countdown Timer mode)
Wireless Wall Switch
Model: WE-318/WR-318
On-Off/Countdown
Timer/ Flashing Alert Mode:
Start with the load turned on. Press and hold
‘SET’ button; Blue LED’s will ash quickly
(release for On/Off mode), then slowly
(release for Flashing Alert mode- only the
WR-001 has this feature) and then it will be
solid (release for Countdown Timer mode).
Plug-In Dimmers
Model: PL-318/PR-318 (repeater)
PR-318S (repeater for security)
On-Off/Countdown
Timer/ Flashing Alert Mode:
Start with the load turned off. Press and
hold ‘SET’ button; Red LED will ash quickly
(release for On/Off mode), then slowly (release
for Flashing Alert mode) and then it will be
solid (release for Countdown Timer mode).
Garage Door Smart Button
Model: GB-318
Press and hold the black learn button (right
side of the unit) for approx. 3 seconds. The
LED light will start to blink faster. Immediately
let go and transmit the learn code from your
transmitter

skylinkhome.com
Wireless Control Everywhere.