SKYN CARE LMSBHR1 User manual

BLACKHEAD REMOVER
INSTRUCTION MANUAL
LMSBHR2
LMSBHR1

PRODUCT INTRODUCTION
Microcrystalline Firming Blackhead Remover is a multifunctional beauty
instrument which integrates the functions of microdermabrasion, firming
skin, cleansing pores, blackheads and acne. The vacuum aspirator utilizes
more than 100,000 natural mineral micro-drilling particles to remove the
aging skin and the dirt in the pores reduce facial fine lines, which is a non-
invasive and non-irritating technique, uses the diamond thickness on the
suction bar to control microdermabrasion strength. At the same time, 4
dierent shape probes have 4 dierent functions, which combines various
functions such as microdermabrasion, firming and clean pores.
WORKING PRINCIPLE
Vacuum vapour-pressure type slimming face technology
1. With a vacuum suction system, it gently massages the skin, promotes
blood and lymph circulation, promotes metabolism, and makes the
dermal tissue get enough nutrients to make the skin more firm and shiny;
2. Enhances the absorption of your favorite beauty products so they can
penetrate the skin;
3. Promotes collagen reproduction, enhancing the skin to look
young and firm;
4. Promotes skin cell regeneration;
5. Improves skin microcirculation and promotes melanin metabolism,
thereby diminishing melanin spots on the skin.
Microdermabrasion probe
The natural mineral microcrystalline diamond particles on the
microdermabrasion probe gently remove the stratum corneum to make the
skin smoother and more radiant. It gently pushes out the rough surface and
debris, and has the function of suction. It can suck out the dirt on the skin,
promote the blood circulation while removing the skin old dead cell, help
skin cell renewal, keeps the skin smooth and rejuvenates.
PRODUCT DETAILS
Name: Blackhead Remover
Power input: 5V•1A
Power: SW
Size: 140.35mm
Body weight: 67.6g

SAFETY WARNING
1. The firming function has the function of facial V shape lifting, and skin
with injuries and scars is not recommended.
2. Dry skin is recommended to be used once a week. Oily mixed skin can
be used twice a week for less than 5 minutes each time, but it is also
depending on the skin condition.
3. Please do not press hard on the skin, the instrument itself has a
strong suction.
4. After the end of the nursing, the skin will have some irritation or
redness due to the accelerated microcirculation of skin. This is a normal
phenomenon. After stopping use, it will automatically disappear after
about 30 minutes.
5. Make sure you are moisturizing and using sunscreen when you
have finished using the device.
6. Do not use scrubs or other exfoliating products before and after
treatment.
PRODUCT FUNCTION
Four replaceable heads with dierent functions:
Microcrystalline skin head
A microdermabrasion probe with microcrystalline
diamond particles. The surface area of the crystallites
is large, and the surface adsorption performance and
activity are quite prominent. In the case of not harming
the skin, it is better to massage the skin to achieve the
exfoliating eect, so that the skin is rejuvenated!
Blackhead removal & skin firming head
The large round mouth tip has the characteristics
of strong suction. It has a remarkable eect on fat
blackheads and so on. The unique vacuum pressure
suction mechanism is used for micro-lifting and massage
on the skin, deeply aecting the bottom layer of the skin,
stimulate microcirculation operation, promote blood and
lymph circulation, and recreating firm skin!
Clean pores head
The small round hole probe has a weak suction force.
Aim the round holes at blackheads and acne to remove
dirt, blackheads and acne. If the acne is severely broken
and redness, it is not recommended. If the blackhead is
stubborn, it is recommended to use a large round hole
probe. Suitable for thin and sensitive skin.
Reduce fine lines head
The special elliptical hole design is designed for micro
lifting massage of unique parts of the face such as the
corners of the eyes, the nose and the corners of the
mouth, which are dicult to care for, and deeply acts on
the bottom layer of the skin to stimulate microcirculation
and prevent deep wrinkles.

HOW TO USE
FACIAL MICRODERMABRASION
AND FIRMING SKIN FUNCTION:
1. Make sure you have a clean and dry face. Choose which
sized beauty head you want to use and attach to the device.
2. Starting from the jaw, move the beauty instrument from the bottom up.
Place the device on the cheek and move from the inside out.
3. Place the device on the forehead and move from the middle to the sides
then place the Blackhead Remover in the T zone and move from the
bottom to the top of the face.
HOW TO REMOVE BLACKHEADS
1. Replace with a large round hole or a small round hole beauty head.
2. Use the device on the blackheads and acne. Move the device
around your face as needed. .
Technique: When you suck the blackheads move the device around slowly
around the targeted area but please don’t move back and fourth.
REDUCE FINE LINES
1. Insert the oval hole beauty head.
2. Place it in the corners of the eyes, nose, mouth, etc. for care, adjust
the machine position as needed.
Technique: You can use it to suck the skin parts that need to be treated, and
then quickly pull it out, and repeat this operation many times. This operation
can act on the bottom layer of the skin to stimulate microcirculation,
promote blood circulation and increase skin elasticity and prevent wrinkles.

PRODUCT DETAIL
MODE DISPLAY
POWER DISPLAY
When the battery is low, all the symbols flash together.
0.2 SECOND INTERVAL
Replaceable
head
Switch button/ suction
adjustment button
Display status:
Mode 1
When charging, the symbol is displayed in a clockwise rotation cycle.
When the charging is completed, the symbol is always on.
Display status:
Mode 2
Display status:
Mode 3
Display status:
Mode 4
Suction adjustment
indicator
USB charging
interface

WHERE TO USE THE 4 SUCTION HEADS
PRODUCT CONFIGURATION
MICROCRYSTALLINE
HEAD:
Exfoliating eect for rejuvenating skin
1. Device x1
2. Suction Head x4
3. Sponge x5 + Silicone ring x2
PORE PERFECTION
HEAD:
Delicate blackhead removal
for sensitive skin
BLACKHEAD
REMOVAL HEAD:
Large round head for strong
suction
SPECIAL POINTED
HEAD:
Designed for Microliftin massage
suction for the corners of the
nose and mouth.
4. Charging cable x1
5. Instruction manual x1
1 2 3 4 5
BLACKHEAD REMOVER
INSTRUCTIONMANUAL
LMSBHR2
LMSBHR1

PRECAUTIONS
1. Ensure your hands are dry before use and do not let water come into
contact with the device as it could damage it.
2. Make sure the filter sponge is properly inserted into the filter cup before
handling and make sure the sponge is dry. Make sure water or other liquid
will not be sucked into the air pump of the body, causing blockage, the
device will not work properly.
3. Do not wash the product with water.
4. This product is not intended for use by persons with disability or lack of
experience and knowledge, (including children). There must be a guardian
who supervises and guides the use of this product and is responsible for
how the device is used.
5. This product is not suitable for cosmetic surgery, rhinoplasty and other
parts of the skin cosmetic surgery, including pregnant women and
heart patients.
REF Model Reference
Complies with EU requirements
“Environment Protection” – Waste electrical products should not be
disposed of with household waste. Please recycle where facilities exist.
Check with your local Authority or retailer for recycling advice.
Manufacture Date
Unit 3 Perrywood Business Park
Honeycrock Lane, Redhill, RH1 5DZ UK
[phone] | www.skyncare.co Made in China