Skyrc CTG-015 User manual

Digital Camber Gauge
CTG-015 Instruction Manual V1.0
INTRODUCTION
MEASURE CAMBER
CONNECTING
Congratulations on the purchase of SkyRC Digital
Camber Gauge for 1/10 Touring Car!
With Bluetooth integrated, CTG-015 can measure the
RC car's camber angle and toe angle and send data
to your mobile phone.
Download the RC Gears app to get started to fine-tune
your race wheels!
The accurate Digital Camber Gauge allows you to
tweak your camber and camber gain settings, finding
peace of mind that you are following a precise,
replicable and trustworthy measurement tool.
On your setup wheels, in your race wheels, or next to
your setup station, it will give you incredibly accurate
readings on the camber angle of your wheels.
The fine-tuning and camber-adjusting allow you to
achieve your perfect tire wear and traction point.
1. Long press to turn on. Enable Bluetooth
on your smartphone and open the App;
3. The corresponding
module flashes blue
during the process.
Place the racing wheel on a
reference surface, and select
the Zero button on the app.
Hold the gauge against the
wheel, and read the value
through the app.
After measuring,
you can tap the
Hold button on
the app for better
reading.
2. Search to connect;
* Long press the
switch to turn on.
GNSS Performance Analyze r
GSM020
Corner Weight Syst em
SCWS2000
Center of Gravity Gaug e
CGG-020 & SAM-020
CTG-015
RC Gears Searching....
Camber Gauge
ZERO HOLD o
o
0o
10
o
5o
15
o
-10 o
-5
o
-15
o
3.5
80% Turn Off
* The module
flashes in blue
Camber Gauge
ZERO HOLD o
o
0o
10
o
5o
15
o
-10 o
-5
o
-15
o
3.5
80% Turn Off
* Click to lock data
- 1 - - 2 -
1
2 3
Positive Camber Zero Camber Negative Camber
Remark: More camber means more grip that the tire will touch the corner.
Camber Gauge
Digital
Camber Gauge
for 1/10 Touring Car
Digital
Camber Gauge
for 1/10 Touring Car
Digital
Camber Gauge
for 1/10 Touring Car
Digital
CamberGauge
for1/10 Touring Car

This gauge's accuracy is astonishing. Tests have shown a tolerance of up to 0.2
degrees across a 3-degree range, which is commonly adopted for touring cars.
Every single Camber and Toe Gauge is tested and calibrated before delivery.
You can use this gauge on any angle setup station as the Zero function allows
it to zero to any angled surface you are working on. Zero it on your setup
station before use, and you will have accurate measurements throughout the
day!
We guarantee this product to be free of manufacturing and assembly defects
for a period of one year from the time of purchase. The warranty only applies
to material or operational defects, which are present at the time of purchase.
During that period, we will repair or replace free of service charge for products
deemed defective due to those causes.
This warranty is not valid for any damage or subsequent damage arising as a
result of misuse, modification or as a result of failure to observe the procedures
outlined in this manual.
Note: The warranty service is valid in China only.
If you need warranty service overseas, please contact your dealer in the first
instance, who is responsible for processing guarantee claims overseas. Due to
high shipping cost, complicated custom clearance procedures to send back to
China. Please understand SkyRC can't provide warranty service to overseas end
user directly.
If you have any questions which are not mentioned in the manual, please feel
free to send email to [email protected]
Input Voltage: 5V
Input Current: 200-300mA
Interface: Type C
Working Voltage: 3.4-4.2V
Working Current: <10mA
Size: 45×12×80mm
Weight: 53g
Low-voltage Protection: <3.4V (Flashes Red)
Measuring Range: ±17.5°
Measuring Accuracy: ±0.2°
Working Temperature: 0°C-50°C
Working Humidity: 5%-90% (None-condensation)
Storage Temperature: -10°C-50°C
Storage Humidity: 1%-75% (None-condensation)
- 3 -
2022.04
7504-1648-01
SPECIFICATIONS
WARRANTY AND SERVICE
MEASURE TOE
Hold the car kit vertically on
the setup station
Hold the gauge against the wheel, and
read the value through the app, with
peace of mind achieving a very accurate
measurement of toe-in and toe-out.
1 2
Camber Gauge
ZERO HOLD o
o
0o
10
o
5o
15
o
-10 o
-5
o
-15
o
3.5
80% Turn Off
Toe-in No Toe Toe-out
Remark: More toe-out increases oversteer!
Digital
Camber Gauge
for 1/10 Touring Car