sleepypod Clickit Terrain User manual

Sizing Guide
Correct size
Wrong size, too large
Wrong size, too small
TIGHTENING
Pull bottom strap and move
metal slide towards vest. Hold metal slide and pull
strap then repeat step 2.
Hold metal slide and pull
metal buckle.
LOOSENING
Pull metal slide toward
metal buckle.
Hold metal slide and pull
metal buckle.
Hold metal slide and pull
top strap towards buckle.
FULLY EXTENDED FULLY RETRACTED
EXTRA LOCKING POWER (OPTIONAL)
Tuck the excess strap into
the vest pocket.
Fold excess strap down
through elastic band.
Fold excess strap up
through top of metal slide.

Your dog should be able to sit
up and lie down comfortably
in the Clickit Terrain.
To connect Clickit Terrain to your vehicle, insert seat belt through both
loops located on the back of the harness and then buckle into the car’s
seat belt buckle.
Avoid locking the seat belt.
Place Sleepypod logo in the center of your dog’s
chest. Buckle with enough room under both
straps for 3 flat fingers.
To use as a walking
harness, clip both metal
rings (at the neck) onto
your dog’s leash.
Take time to acclimate
your pet to its new
harness before
a trip.