sleepypod SUBARU Clickit Sport User manual

To connect Clickit Sport to your vehicle,
insert seat belt through both loops located
on the back of the harness and then buckle
into the car’s seat belt buckle. Avoid locking
the seat belt.
To use as a walking
harness, clip both metal
rings (at the neck) onto
your dog’s leash.
Your dog should be
able to sit up and lie
down comfortably.
Buckle Shield S-Clip
Pets should ride in the back seat.
Never leave a pet unattended. (optional accessories)
Place Sleepypod logo in the center of your dog’s chest.
Straps should fit tight with three fingers laid flat under
the buckles while your dog is standing up. Straps may
appear loose while dog is lying down.
Clickit Sport
Car Harness Restraint
Watch the instructional video at YouTube.com/Sleepypod
HOW TO CLICKIT ON YOUR DOG
HOW TO CLICKIT IN THE REAR SEAT
Attach hook and loop tab to
the strap.
Take time to acclimate your pet
to its new harness before a trip.

Hold metal slide and pull
bottom strap.
Hold metal slide and pull
plastic buckle.
Pull metal slide toward buckle. Hold metal slide and pull strap
then repeat step 2.
Hold metal slide and pull
plastic buckle.
Too tight Too loose
Pull top strap and move metal
slide toward vest.
This product is covered through Sleepypod’s Crash Replacement Program when used in accordance
with manufacturer recommendations and for as long as the original purchaser owns the product.
It is eligible for replacement in full or part if damaged in an auto accident. View program details at
Sleepypod.com/crash-replacement-program
Crash Replacement Warranty
©2022
Patented
[e-mail]
Sleepypod.com
HOW TO ADJUST CLICKIT SPORT HARNESS SIZING GUIDE