Slot.it 4WD Audi R18 User manual

Mechanical Instructions 4WD Audi R18

Mechanical 4WD Audi R18 2
Wheel assemby: front right
Bearing must
be aligned in
the plastic wheel
so that its inside
surface is aligned
with the inside
surface of the
plastic wheel.
1) Insert bearing from
the inside of the wheel
Warning the bearing in right front wheel must be assembled
with the 'HF0406' writing facing OUTSIDE of the car
FRONT RIGHT WHEEL
XX = Item number
21
17

Mechanical 4WD Audi R18 3
2 - Insert aluminium
hub in the bearing, and
insert the mini screw
M2x3 in one of the two
hub holes
26
22

Mechanical 4WD Audi R18 4
3 - Use the special
seeger ring pliers to
mount the seeger ring
in the recessed guide,
to assemble bearing
and aluminium hub
together.
23

Mechanical 4WD Audi R18 5
4 - Mount front wheel
insert and tyre
18
25

Mechanical 4WD Audi R18 6
Wheel assemby: front LEFT
Bearing must be
aligned in the plastic
wheel so that its
inside surface is
aligned with the
inside surface of the
plastic wheel.
5 - Insert bearing from
the inside of the wheel
Warning the bearing in left front wheel MUST be assembled with the
'HF0406' writing facing INSIDE the car
then repeat steps 2,3,4 as done for the front right wheel
FRONT LEFT WHEEL
21 17

Mechanical 4WD Audi R18 7
6) Insert mini screw in
the front wheel hub all
the way, until it's
completely inside the
aluminium hub
26

Mechanical 4WD Audi R18 8
7) Press pulley with 17
teeth (2 dots on the back,
see below) on the hub.
The cut in the pulley must
be aligned on top of the
grub screw.
33

Mechanical 4WD Audi R18 9
8) Unscrew the miniscrew
so that the axle can be
inserted in the front wheel.

Mechanical 4WD Audi R18 10
Wheel assemby: rear right
REAR RIGHT WHEEL
9) This is a standard wheel
- use tyres, aluminium hub,
insert, mini screw
19
26
16
24

Mechanical 4WD Audi R18 11
Wheel assemby: rear left
REAR LEFT WHEEL
10) Same tecnique used for
the front wheels:
insert mini screw in the front
wheel hub all the way, until
it's completely inside the
aluminium hub
26
16

Mechanical 4WD Audi R18 12
11) Press pulley with 16
teeth (1 dot on the back,
see below) on the hub.
The cut in the pulley must
be aligned on top of the
grub screw.
34

Mechanical 4WD Audi R18 13
12) Unscrew the miniscrew
so that the axle can be
inserted in the rear wheel

Mechanical 4WD Audi R18 14
13) add tyre and wheel
insert
16
24
19

Mechanical 4WD Audi R18 15
Motor mount assembly
14) Add standard motor
mount parts: motor, magnet,
bushings, adapter
1
228
20
20

Mechanical 4WD Audi R18 16
15) Screw the motor to the motor mount, keeping the pulley tensioner between the
motor mount and the heads of the screws
30
3

Mechanical 4WD Audi R18 17
Final result

Mechanical 4WD Audi R18 18
Chassis assembly
16) turn chassis
upside down, and
insert two 6mm mini
screws in the special
holes. Also add two
bushings in the front
axle supports.
20
27
20

Mechanical 4WD Audi R18 19
17) Add front shaft.
14