
0605
EN EN
Sign Up /In
If you have not registered an account with smanos, please press “Sign
Up” just below the “sign In” icon on the App, and follow the instructions
to create your account.
* If you do not receive an account verification code in your email after
signing up, please check your spam/junk folder.
Once your account has been verified, please select the “Sign In” icon
and enter your email address and password to log in.
If you already have an account with us, please select the “Sign In” icon
and enter your email address and password to log in.
3.2 Adding a Camera
Important: This camera does not support WiFi of 5GHz band, if dual-band (5GHz
and 2.4GHz) router under the same name is used, please go into your routers
settings to separate these two bands into different names and make sure to select
with the 2.4GHz WiFi instead of the 5GHz's.
Tap on [+], then follow the steps to set up your P70 camera with your
WiFi.
4. Setting Up Your P70 Camera
①Waiting for Your Camera to Boot Up
Plug the power adapter into a wall socket, the blue indicator light will
start blinking.
②Putting the P70 Camera into WiFi Connection Mode
Press and hold the Reset Button on the side by using the supplied Reset
Pin until the camera beeps once, and then release the button, the red
indicator starts to blink.