Smanos UFO User manual

© 2016 SMANOS HOLDING LTD. All Rights Reserved. Ver: PT-180-UM-ML-V1.0
Printed in China
UFO
Panoramic WiFi HD Camera
QUICK GUIDE

Thank you for becoming a UFO fan!
UFO Overview

An authorized
smartphone is
looking in on
the video
A single indicator
flashes constantly
Firmware
updates
One side of the
indicators flash
slowly
Getting Started
1. Download the “smanos home” app
Search for “smanos home” in App Store/Google Play,
then download and install the App.
Light Indicators
The indicators on the UFO give you an idea of the
current device status. Here is a list of what each pattern
means, with the UFO positioned as shown:
UFO
booting up
Searching for
WiFi signals
Left-row and
right-row
indicators flash
alternately
Indicators run in
succession
clockwise first and
then
counterclockwise,
repeatedly for
25~40 seconds
UFO
established a
successful WiFi
connection
Indicators run in
succession
clockwise
Description Indicators Meaning
UFO
configuration
mode
All indicators flash
simultaneously

3. Add Devices
Press the [+] button
on the main App
page.
2. Sign Up/In
If you have not registered an account with smanos,
please press “Sign up” just below the “Sign in” icon
on the App, and follow the instructions to create your
account first.
* If you do not receive an account verification code in
your email inbox during the registration process,
please remember to check your spam/junk folder and
make sure the notice has not been blocked by your
service provider.
Once you have an account with us, please select the
“Sign in” icon and enter your email address and
password to log in.
Tap on [UFO Panoramic WiFi HD Camera], or tap on the
[ ] icon at the bottom of this page to scan the QR code
on the back of your UFO; then follow the configuration
steps to set up your UFO with your home WiFi.
Option 1 Option 2

Step 1. Waiting for the UFO to boot up
Plug the power adapter into a wall socket and the UFO
camera will boot up in 25 to 40 seconds. During this time,
you will see indicators run in succession clockwise and
then counterclockwise.
Once the UFO is ready for launch, the indicators will flash
on the right then on the left as a row, which means it is
searching for viable WiFi signals.
Device Indication

Step 2. Connecting the UFO to your smartphone
Press and hold the Configuration Button on the side for 5
seconds, and you will hear a tone which indicates that the
UFO has switched to the WiFi configuration mode.
Tap on [WiFi] to jump to your smartphone’s WiFi list, and
select “smanos UFO” to connect to the camera. Now,
your smartphone is the control center of your UFO.
Note: Wait until you see all the indicators flash simultaneously. Note: Make sure the WiFi icon is on the top-left corner of your
phone before proceeding to the next step.
Configuration Button on the device

Installation
When a successful connection is established, the
indicators will run in succession.
Now, your UFO is ready for a spin!
Ceiling or Wall-Mounted
Step 3. Entering WiFi details for your UFO camera
Pick the 2.4GHz WiFi network from the display list for
your UFO camera and enter the WiFi network password.
The UFO will connect to the selected WiFi network. The
binding process should take about one minute.
Step One: Unlock the base from your camera.
Step Two: Place the base on the wall, in the angle and relative
position shown above; use the provided tool set to install it
properly.
StepThree: Lock your camera into position onto the base.
Step Four: Make sure the PIR motion sensor is pointing vertically
to the ground.
UP ↑

Specifications
Model: PT-180
Power: DC 5V 1A
Camera: Full HD 1080p
Field of view: Horizontal 180°, vertical 180°
Video compression: H.264/MJPEG
Video resolution: Birds Eye 1280x1280/ Panorama
1920x1080/Quad View 1280x960
Night vision: Yes, auto IR-cut filter
WiFi: 802.11b/g/n with WEP/WPA/WPA2 encryption
2.4GHz
On-site storage: microSD card up to 32GB
Operating conditions: 0-50℃, humidity < 95% RH
(non-condensing)
Dimensions (L x W x H):106 X 106 X 36mm
Technical support:
http://www.smanos.com/UFO
[email protected]
Desk or Any Flat Surface
Step One: Put the power cable (USB) through the bottom hole
of your bracket.
Step Two: Insert the USB into the power port.
Step Three: Lock your camera onto the bracket.
Step Four: Make sure the PIR motion sensor is pointing vertically
to the desk/ground.
®