SMART-AVI V2V-SC4KUHD User manual

V2V-SC4KUHD
Quick Start Guide
A full Manual can be downloaded from
www.smartavi.com/V2V-SC4KUHD/
TECHNICAL SPECIFICATIONS
VIDEO
Format HDMI 4K Converter and Scaler
Maximum Pixel
Clock 165 MHz
Input Interface (1) HDMI (Type A female connector)
Output Interface
(2) HDMI (Type A female connector);
(1) TOSLINK, Spdif audio output;
(1) 3.5mm jacket, L/R audio output
Resolution
640 x 480@60Hz, 800x600@60Hz,
1024x768@ 60Hz, 1280x768@60Hz,
1280x800@60Hz, 1280x960@60Hz,
1280x1024@60Hz, 1360x768@60Hz,
1366x768@60Hz, 1400x1050@60Hz,
1440x900@60Hz, 1600x900@60Hz,
DDC 5 volts p-p (TTL)
Input Equalization Automatic
Input Cable Length Up to 20 ft.
Output Cable
Length Up to 20 ft.
AUDIO
Output (1) 3.5 mm Stereo Audio
POWER
Power
Requirements
12V DC, 2A power adapter with center-
pin positive polarity
ENVIRONMENT
Operating Temp 32° to 104° F (0° to 40° C)
Storage Temp -4° to 140° F (-20° to 60° C)
Humidity 0-80% RH, non-condensing
CONTROL
Front Panel Push Buttons with LED indicators
WHAT’S IN THE BOX
PART NO. QTY DESCRIPTION
V2V-SC4KUHD-S 1 HDMI 4K Converter and Scaler.
PS5VD3A 1 12V DC, 2A power adapter with
center-pin positive polarity.
1 Quick Start Guide
NOTICE
The information contained in this document is subject
to change without notice. SMART-AVI makes no war-
ranty of any kind with regard to this material, includ-
ing but not limited to, implied warranties of merchant-
ability and fitness for particular purpose. SMART-AVI
will not be liable for errors contained herein or for
incidental or consequential damages in connection
with the furnishing, performance or use of this materi-
al. No part of this document may be photocopied,
reproduced, or translated into another language with-
out prior written consent from SMART-AVI, Inc.
Toll Free: (800) AVI-2123
Phone: [phone]
2455 W. Cheyenne Ave, Suite 112
North Las Vegas, NV 89032
smartavi.com
HDMI 4K CONVERTER
AND SCALER
HDMI 4K Converter
and Scaler

HARDWARE INSTALLATION
1. Using qualified HDMI cables, connect an HDMI source (such as Blue-ray, games console,
satellite/cable TV, media server etc.) to HDMI IN port of the splitter.
2. Connect the HDMI display devices (LED/LCD display or projector) to the HDMI OUT ports of
the splitter.
3. Insert the 5V power adaptor into the power input port of splitter and connect to wall outlet
mains supply.
4. After ensuing all sources and displays are properly connected, turn on mains power supply.
5. Check Power and IN/OUT LED on the front panel are fully lit for correct connection. If not,
check cable connections.
Note:
1. Both source and display devices must be powered on for LED indicators to detect device con-
nection.
2. Ensure power supplied are disconnected from all devices before installation.
SYSTEM CONTROL
LEDs Name Description
1IN
ON: An HDMI sour ce is connected to the
splitter
OFF: No HDMI source is connected to the
splitter
2OUT 1
ON: Display is connected to HDMI output
port 1
OFF: No display is connected to HDMI
output port 1
3OUT 2
ON: Display is connected to HDMI output
port 2
OFF: No display is connected to HDMI
output port 2
44K
ON: 4K signal input
OFF: None 4K signal input
5HDCP
ON: Ther e is HDCP encr yption with input
signal
OFF: None HDCP encr yption with input
signal
6POWER
ON: The splitter is power on
OFF: The splitter is power off
EDID Switch Resolution Switch
Position Descriptions
(EDID on input port) Position Descriptions (Resolution on Out 2)
0Copy EDID from OUT1 01920x1080@60Hz
11920x1080@60Hz 13840x2160@30Hz
23840x2160@30Hz 23840x2160@60Hz
33840x2160@60Hz 31280x720@60Hz
41280x720@60Hz 41024x768@60Hz
51280x1024@60Hz 51366x768@60Hz
61920x1200@60Hz 61280x1024@60Hz
7Reserved 71920x1200@60Hz
8Reserved 81280x1024@60Hz,DVI
9Reserved 91920x1080@60Hz,DVI