SMART-AVI HSA-100 User manual

HDMI to HDMI with Audio/SPDIF
Converter
HSA-100
www.smartavi.com
Installation
Manual
What’s in the Box?
PART NO. QTY DESCRIPTION
HSA-100 1 HDMI to HDMI and Stereo Audio/SPDIF Converter
PS5VDC2A 1 5 Volt 2 Amp Power Supply
Technical Specications
OTHER
Power External 100-240 VAC/5VDC2A @10W
Dimensions 3.375 in W x 0.875 in H x 2.5 in D
Weight 0.83 lb
Operating Temp. 0-55 °C (32-131°F)
Storage Temp. -20-85 °C (-4-185 °F)
Humidity Up to 95%
© Copyright 2012 SmartAVI, All Rights Reserved
NOTICE
The information contained in this document
is subject to change without notice. Smart-AVI makes
no warranty of any kind with regard to this material,
including but not limited to, implied warranties of
merchantability and fitness for any particular purpose.
Smart-AVI will not be liable for errors contained herein or for
incidental or consequential damages in connection with the
furnishing, performance or use of this material.
No part of this document may be photocopied, reproduced or
translated into another language without prior written consent
from Smart-AVI.
For more information, visit www.smartavi.com.
SmartAVI, Inc. / Twitter: smartavi
11651 Vanowen St. North Hollywood, CA 91605
Tel: [phone] Fax: [phone]
http://www.SmartAVI.com
Rack Mountable Option
Our SmartRack is the perfect solution to allow
virtually all SmartAVI devices to be custom mounted
in a standard 19” server rack. The SmartRack is fully
adjustable and can secure/organize several devices.
HDMI VIDEO
Format HDMI 1.3b [Deep Color, xvYcc color space
supported]
DVI Compliance Single-link DVI-D 1.1
HDCP Compliance 1.0/1.1
Video Bandwidth Single-link 340MHz [10.2Gbps]
Resolution 480i,480p,720i,720p,1080i
Input Interface (1) HDMI[7.1ch audio & video]
Output Interface (1) HDMI[7.1ch audio & video]
Connector Type A[19-pin female]
Maximum Distance 25 ft.
V2V FAMILY
SPDIF DIGITAL AUDIO OUTPUT
Signal Type DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-
AC3/DSD
Sampling Rate 32, 44.1, 48 and 96 KHz
Input Interface (1) TOSLink Optical (1) COAX (RCA)
ANALOG AUDIO OUTPUT
Frequency Response 20 Hz to 20 KHz
Impedance 600 ohm
Nominal Level 0-1.0 V
Common Mode Rejection at 60dB
Output Interface Right/Left RCA (Female), 3.5mm Stereo
(Female)

Introduction
An HDMI cable carries the video and the audio in one
signal. However, many TVs and displays have poor
quality sound or no sound at all.With the HSA-100 HDMI
Separator you can separate your audio signal from the
HDMI and send it to external speakers, an audio receiver
without digital inputs, or amplier without digital
inputs etc. The HDMI Separator supports optical or
analog L/R audio in all digital audio formats including
5.1/7.1 Surround.
Applications
• Security
• PC Networking
• Conference Center Systems
• Point of Sale
• Camera Surveillance
• Video Phone
• Control Room Systems
• Recording Studio
Features
• Compliant with HDMI 1.3, HDCP 1.1 and DVI 1.1
• Supports HDMI Sample Rates up to 192 kHz
• Supports Optical Sample Rate up to 48 kHz
• Supports TMDS clock frequency rate 225MHz
• Supports high-bit-rate (HBR) audio
• HDMI cable distance testing showed that with
1080p 8bit resolution, the input & output can run
up to 15 meters
• Low power consumption
Installation
1. Connect an HDMI input device to the HDMI IN
connector on the HSA-100.
2. Connect a digital audio output device (SPDIF) or
the stereo audio RCA outputs.
3. Connect an HDMI display device to the HDMI OUT
connector on the HSA-100.
4. Connect the power cord to the HSA-100.
5. Power on the input devices, speakers and the
display.
HSA-100 Front
HSA-100 Rear
Product - Installation Diagram
HSA-100 HDMI HDTV AND HOME THEATER SPEAKERS
HDMI VIDEO SOURCE AMPLIFIER