Smart view KVS-12 User manual

VIDEO
SPLITTER
(KVS-12)
1 In 2 Out
(KVS-14)
1 In 4 Out
USER MANUAL
KVS-12 / KVS-14
Package Contents-
§1 Smart View KVS-12 or KVS-14 Video Splitter
§1 user manual
§1 power adapter DC 9V 600mA
Any thing missed, please contact with your vendor.
Introduction
Through the video splitter KVS-12, KVS-14, you can use
one PC to display identical image on 2,4 monitors or even
more.
Video splitter is ideal for:
§Test bench facilities
§Data Center
§Help desks
§Video broadcasting:
Presentation
Stock quotes
Timetables
Educational facilities
Features
§With 300 MHz pixel frequency.
§Extends the video signal up to 65 meter (213 feet).
§Supports the DDC, DDC2, DDC2B. (For video out port
1)
§Can be cascaded.
§The output is compatible with standard VGA card.
Specifications
Function KVS-12 KVS-14
Video Input Connector
(HD-15 Female)11
Video Output Connector
(HD-15 Female) 24
Max. Resolution 2048 x1536 60 Hz
Pixel Frequency 300 MHz
Cable Distance
(Device to Monitor) 65 m (213 feet) Max.
Signal Type VGA, SVGA,
XGA,QXGA,UXGA, Multisync
Power Adapter (Min.) DC 9V 600mA
Housing Plastic
Weight 94 g 111 g
Dimensions (LxWxH) 100x81.5x27.5 mm
-1-
Technical Specifications
Input/Output Signal
Pin # Signal Pin # Signal
1Red video 9NC
2Green video 10 Ground
3Blue video 11 ID0
4ID2 12 ID1
5Ground 13 Horizontal Sync
6Analog Ground 14 Vertical Sync
7Analog Ground 15 ID3
8Analog Ground
Appearance
Top View
1. Power LED
2. Input Power Jack
3. “Video In” Port
4. “Video Out” Port
*There are 2/4 out ports for KVS-12 / KVS-14.
-2-

Installation
1. Turn off the PC and monitors.
2. Connect the HD-15 video extension cable between the
PC and the “video in” port of splitter.
3. Connect the HD-15 video extension cables between the
monitors and the “video out” ports of splitter.
4. Connect the power cord and turn on the splitter.
5. Turn on the PC and monitors.
Note:
§If you install the DDC monitor for the splitter, the rest of
monitors must be the same resolution as the DDC
monitor.
§Available monitors include the VGA, SVGA, XGA,
QXGA,UXGA, Multisync, and exclude the CGA, EGA,
Mono.
Operation for cascade:
1. The function to display identical image on more monitors,
you request to attach another splitter.
2. Connect the HD-15 male/male video extension cable
between the “video out” port of the former splitter and
the “video in” port of the latter splitter.
Note:
Even though you are allowed to cascade the splitter with
varied ports, the image might become unstable if cascade
too many tiers of splitters.
P.S.: The example cascades the 2and 4ports splitters;
however, you can cascade the video splitter with
demanded port.
-3-
Trademarks:
All the companies, brand names, and product names
referred to this manual are the trademarks or registered
trademarks belonging to their respective companies.
-4-