Rohnson R-032 User manual

1
Electric Under Blanket
MODEL NO. : R-032 / R-035
Instruction Manual
.

2
IMPORTANT INSTRUCTIONS
Please keep for future reference
READ THE INSTRUCTIONS BEFORE USE.
I . Safety tips
(A) Safety instructions:
1. When the electric blanket is folded, crumpled or used abnormally the electric blanket
can overheat which will activate the permanent protection function. This cannot be
repaired at home and must be returned to the manufacturer.
2. When the power for the electric blanket is lower in voltage than recommended, the
temperature of the blanket rises slowly, and the heating ability is relatively low. This
situation is not a malfunction of an electric blanket, and users should pay attention to
checking the voltage of the power.
3. The indicator lamp and electric blanket circuit are connected in parallel. The
indicator lamp does not influence the electric blankets ability to generate heat when it
is broken so care should be taken to ensure the electric blanket is functioning
properly.
4．This appliance can be used by children aged from 8years and above and persons
with reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, if they have been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved. Children should be
supervised to ensure that they do not play with the appliance.
(B) Warnings and cautions
In order to prevent damage or malfunction, users must observe the following points while
using the product. Failing to do so will void any manufacturer responsibility.
1. Do not use folded or rucked. (Fig.1)
2. Do not roll and drape the appliance while being used. Ensure the bed the appliance is
being used on will guarantee the electric blanket is laid flat. Do not use the electric
blanket if the in any other circumstances to avoid overheating. (Fig.2)
3. Do not use pins on the appliance. Do not scratch with sharp devices or beat the
electric blanket with blunt devices. Do not attempt to secure the electric blanket with
pins or other metal objects (Fig.3)
4. Use the electric blanket under the body only. Do not wrap the body with the blanket
or use in any other way. (Fig.4)

3
5. To avoid scalding of the body, do not use with a helpless person, this appliance must
not be used by persons insensitive to heat and other very vulnerable persons who are
unable to react to overheating。(Fig.5)
6. Do not turn on the electric blanket when there is any folded bedding or heavy objects
on it, so as not to cause the electric blanket to overheat. (Fig.6)
7. Do not expose the electric blanket to direct sunlight. Do not roast and do not iron the
electric blanket.Avoid any damage to the insulation of the heating wires. (Fig.7)
8. Do not use together with any other heating appliances (such as foot warmer, hot-
water bottle). (Fig.8)
9. Do not use with anything that can start a fire on the bed such as cigarettes, sparks etc,
which can lead to fire. (Fig.9)
10. Switch off the electric blanket power or pull out the electric blanket plug when you
are going out or not using the electric blanket to avoid any accidental fires. (Fig.10)
11 12
Do not dry clean. (Fig.11)
Do not be used by very young children (0-3 years). (Fig.12) Children under the age of
three are not to use this appliance due to their inability to react to overheating.
Do not be used by young children over the age of three unless the controls have been pre-
set by a parent or guardian and using the appliance under supervised by the parents
or guardian.
After the electric blanket has been turned on, users can't leave for over an hour to prevent
any possible fire.
Do not unplug the power plug by pulling on the power cord and do not move the
appliance by pulling on the soft power cord.
Only use together with the switch unit model RU9.
The product is not intended for medical use in hospitals.
Wash by hand ,before cleaning, first disconnect the product from power and ensure the
electric blanket is off work and in room temperature, put the electric blanket into
water flat, Sprinkle with detergent, Gently knead by hand but keep away from the
heating wire which can be touch to avoid broking the heating wire.After
cleanning ,don’t twist,heavy ripping by hand then hang it , put the electric
blanket in a cool and airy place, Do not expose the electric blanket to direct
sunlight and do not use hairdryer to dry.it must be completely dry before use.
cleaning and user maintenance shall not be made by children without supervision

4
Machine Washing:
·Wash the heated under blanket in the washing machine at 30℃using the delicate
program for sensitive clothing.
·Only use the spin program for sensitive clothing. DO NOT PERFORM an additional
spin cycle.
It is proposed to wash the product in the washing machine for maximum 2 times per year
to ensure the maximum life span of the product.
When not in use, the electric blanket should be stored in a dry place. When storing the
appliance, allow it to cool down before folding. Do not crease the appliance by
placing items on top of it during storage. After storing, the blanket should be
carefully checked before use to make sure the control and cords are safe. Do not
power on when the blanket is not totally safe.
Do not attempt to perform any repairs on the electric blanket by yourself. Any use
contrary to the instructions can lead to unwanted consequences.
The power cord of the appliance cannot be changed or repaired. If the cord is damaged,
the appliance must be disposed of.
Do not use the electric blanket on an adjustable bed.
Children should not use the electric blanket unless their parents or guardian have already
set it up in advance, or unless the child has been adequately instructed on how to use
it safely. Children should be supervised to ensure that they do not play with the
appliance.
Do not use when crumpled.
Do not insert pins.
If the heating wire has been cut, do not attempt to repair it by yourself. Please send it to
the technological service departments of our factory or service center to maintain or
check.
Do not try to repair a fuse link or thermal link. The appliance must be returned to the
manufacturer or his agent if the link has ruptured.
Users must observe all the above points. Otherwise, it can produce overheating or
unusually high temperature of part of the blanket due to improper use of the electric
blanket, which can lead to fire, cause bodily injury or property loss.
V Operation method
Lay the electric blanket flat on the bed. The end with no control is the foot of the bed. In
case you desire, you can adjust four fasteners through the four loops (NOTE: the
four fasteners are provided in the package) in order to fix them on the four corners
of the bed. Only spread sheets or thin cotton-padded mattress on the blanket. Make
sure they are laid flat to help conduct heat and to be able to see whether the electric
blanket is uneven. With everything flat on the bed the electric blanket can be used
safely.
General temperature adjustment: Plug power cord into an AC220-240V~ 50Hz wall
outlet (do not connect this appliance with DC) before bedtime.
sheet can use the electric blanket safely.
⚫Microcomputer-timing setting controller adjustment: 1-10hours

5
User can adjust the time as their need, but if not adjust, Turn on the system
default 8 hours.
The temperature can be adjusted in 5 levels,5/4/3/2/1/5 button circulation
Setting 5, setting 4, setting 3 for pre-heat fast for 15 minutes, if don’t need fast
heat any more, button “Cancel”, then button “Temperature” to Constant
temperature state. If you turn on the controller and set no specific setting, it defaults to
setting 5 and after 3 hours of operation, it will change to setting 3.
●Humanized design: To avoid too hot ,after working on “setting 5” or “setting 4” 3
hours, system can change from setting 5 or setting 4 to “setting 3” to keep warm.
●Set the temperature by pressing "temp" (red light will glow)
⚫Set the time by pressing "time" (green light will glow)
⚫When the time is up, the controller will turn off automatically
Dual control: Equivalent to two single beds combined. Two people can adjust
according to their own needs without interfering with each other.
When the electric blanket runs, the control must be uncovered in a position that is easy to
access. Ensure not to put the control under the quilt, pillow, or covered by other
things. Do not leave the control close to any other heat source in case the control is
overheated and damaged.
IV Daily checks and safeguards
To guarantee the electric blanket is used safely. Please pay attention to the following
items:
1. Pay attention and observe the power cords, plug, soft cords that are used to connect
the appliance and control. Check whether there are any unusual situations before
using. If uncertain about the condition and whether it is safe or not, don't continue to
use, please send it to the technological service departments of our factory or service
center to maintain or check.
2. During use, checks should be regularly carried out to ensure the electric blanket is
leveled, fitted firmly and not folded or rolled.
3. Examine the appliance frequently for signs of wear or damage. If there are such
signs or if the appliance has been misused, return it to the manufacturer or his agent
prior to
any further use.
4. The heating wire in the electric blanket should be spaced evenly and smoothly with
no crossing, and no folds between wires. Do not use when any of these situations
occur. It must be sent to the technological service departments of our factory or
service center to deal with. Testing method: lay the electric blanket flat on the bed;
touch the heating wires with hand.
5. When the electric blankets is on the bed, forbid children from jumping on the bed. If
this has already taken place pay special attention to check whether every part of the
electric blanket is normal. Use only after confirming it is normal.
6. When any accident or damage takes place (smoking, fire, abnormal sound, abnormal

6
smell, etc.), first the power must be disconnected from the electric blanket (pull out
the plug), before checking for damage.
VI REPAIRATION:
ATTENTION: THIS PRODUCT CANNOT BE SELF SERVICED AND CAN ONLY
BE FIXED BY PROFESSIONAL WORKERS, OR CONTACT WITH FACTORY TO
GET FIXED.
IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN
ACCORDANCE WITH EC DIRECTIVE 2002/96/EC.
At the end of its working life, the product must not be disposed of as urban waste.
It must be taken to a special local authority differentiated waste collection centre or to a
dealer providing this service. Disposing of a household appliance separately avoids
possible negative consequences for the environment and health, deriving form
inappropriate disposal and enables the constituent materials to be recovered to obtain
significant savings in energy and resources. As a reminder of the need to dispose of
household appliances separately, the product is marked with a crossed-out wheeled
dustbin.