Smart Smart pe260 User manual

SMART Hub PE260

Cautions, warnings and other important product information are contained in the SMART Hub

PE260 Multi-language Warnings Document, document 123005 at www.smarttech.com/support.

yy (×6)

xx (×6)

zz (×6)

yy (×6)

SMARTHub PE260

REV0.3-18June2008

99-00897-20REVA0

QuickReference

SMARTHub PE260

Howdo I get started?

Togetstarted:

1. If the power indicator on the SMART Hub PE260 isred,press it to turn on the unit.

2. Turn on the projectors or displays connected to the SMART Hub PE260.

3. If a login dialog box appears, log in using the name and password provided by your system administrator.

TheWelcomeCenter appears.

4. Press the desired button.

PowerIndicator

Capturenotesand present

informationusing

Whiteboard.*

Collaboratewithothers

usingBridgit™

conferencingsoftware.*

UseSMARTtools with

Whiteboard.*

Viewyouroffice files.*

Orientyour

SMARTproduct.

Configurethe

SMARTHubPE260.

Movethemenu bar to

thetopor bottom

ofthedisplay.

ViewonlineHelp.

*Seereverse for details.

99-00866-20REVC0 1

ImportantInformation

WichtigeInformationen

Informaciónimportante

WARNING • Failure to follow the installation instructions shipped with your SMART Board product

couldresultin personal injury and damage to the product.

• Ensure that any cables extending across the floor to your SMART Board product are

properlybundledand marked to avoid a trip hazard.

• Make sure an electrical socket is near your SMART Board product and remains easily

accessibleduringuse.

• Toreduce the risk o f fire or electric shock,do notexposetheSMART Board productto

rainormoisture.

• Don’t open or disassemble the SMART Board product. Opening the casing voids your

warranty.

• The external power supply (when required) needs to meet the Limited Power Source

(LPS)requirementsof CSA/UL/IEC/EN 60950-1.

WARNUNG • Sollten die Aufbauanleitungen, die mit dem SMART Board-Produkt geliefert wurden,

nichtbeachtetwerden, kann dies zu Verletzungen der Bediener sowie Schäden am

Produktführen.

• Stellen Sie sicher, dass alle Kabel, die über den Boden zum SMARTBoard-Produkt

laufen,ordnungsgemäßgebündelt und markiert sind, damit keine Stolpergefahr

besteht.

• Stellen Sie sicher, dass sich in der Nähe des SMARTBoard-Produkts eine Steckdose

befindetunddass sie während der Verwendung leicht zugänglich bleibt.

• Um das Risiko eines Feuers oder eines Stromschlags zu reduzieren, darf das SMART

Board-ProduktwederRegen noch Nässe ausgesetzt werden.

• Öffnen oder zerlegen Sie nicht das SMART Board Produkt. Durch Öffnen des

GehäusesverfälltIhre Garantie.

• Den eksterne strømforsyning (hvor en sådan er påkrævet) skal opfylde LPS-kravene

(LimitedPowerSource) i CSA/UL/IEC/EN 60950-1.

ADVERTENCIA • No seguir las instrucciones de instalación que se facilitan con el producto SMART

boardpuedeocasionar lesiones personales y daños en el producto.

• Asegúrese de que cualquier cable que vaya por el suelo hasta el producto SMART

Boardestébien sujeto y marcado para evitar cualquier tropiezo.

• Asegúrese de que el producto SMART Board se sitúe junto a una toma de corriente y

dequeésta permanezca fácilmente accesible durante su uso.

• Para reducir el riesgo de incendio o de descarga eléctrica, no exponga el producto

SMARTBoarda la lluvia o la humedad.

• No abra ni desarme el producto SMART Board. Si se abre el gabinete se anula la

garantía.

• La fuente de alimentación externa (en los casos en que sea necesaria) debe cumplir

conlosrequisitos para fuentes de alimentación limitadas (LPS, por sus siglas en

inglés)dela normativa CSA/UL/IEC/EN 60950-1.

99-00866-20REV C0 1

Important Information

Wichtige Informationen

Información importante

WARNING • Failureto follow the installation instructions shipped with your SMART Boardproduct

couldresult in personal injury and damage to the product.

• Ensure that any cables extending across the floor to your SMART Board product are

properlybundled and marked to avoid a trip hazard.

• Make sure an electrical socket is near your SMART Board product and remains easily

accessibleduring use.

• Toreduce the risk of fire or electric shock, do not expose the SMART Board product to

rainor moisture.

• Don’t open or disassemble the SMARTBoar d product. Opening the casing voids your

warranty.

• The externalpower supply (when required) needs to meet the Limited Power Source

(LPS)requirements of CSA/UL/IEC/EN 60950-1.

WARNUNG • Solltendie Aufbauanleitungen, die mit dem SMART Board-Produkt geliefert wurden,

nichtbeachtet werden, kann dies zu Verletzungen der Bediener sowie Schäden am

Produktführen.

• StellenSie sicher, dass alle Kabel, die über den Boden zum SMART Board-Produkt

laufen,ordnungsgemäß gebündelt und markiert sind, damit keine Stolpergefahr

besteht.

• StellenSie sicher, dass sich in der Nähe des SMART Board-Produkts eine Steckdose

befindetund dass sie während der Verwendung leicht zugänglich bleibt.

• Um das Risiko eines Feuers odereines Stromschlags zu reduzieren, darf das SMART

Board-Produktweder Regen noch Nässe ausgesetzt werden.

• Öffnenoder zerlegen Sie nicht das SMART Board Produkt. Durch Öffnen des

Gehäusesverfällt Ihre Garantie.

• Den eksternestrømforsyning (h vor en sådan erpåkrævet) skal opfylde LPS-kravene

(LimitedPower Source) i CSA/UL/IEC/EN 60950-1.

ADVERTENCIA • No seguir las instruccionesde instalación que se facilitan con el producto SMART

boardpuede ocasionar lesiones personales y daños en el producto.

• Asegúrese de que cualquier cable que vaya por el suelo hasta el producto SMART

Boardesté bien sujeto y marcado para evitar cualquier tropiezo.

• Asegúrese de que el producto SMART Board se sitúe junto a una toma de corriente y

deque ésta permanezca fácilmente accesible durante su uso.

• Para reducir el riesgo de incendio o de descarga eléctrica, no exponga el producto

SMARTBoard a la lluvia o la humedad.

• No abra ni desarme el producto SMARTBoard. Si se abre el gabinete se anula la

garantía.

• La fuente de alimentaciónexterna (en lo s casos en que sea necesaria)debe cumplir

conlos requisitos para fuentes de alimentación limitadas (LPS, por sus siglas en

inglés)de la normativa CSA/UL/IEC/EN 60950-1.

SMART Hub PE260 Registration

By registering you’ll receivecontinued customer support and notiﬁcation

of new models and software upgrades.

*Required

Date of Purchase* ____________________ Serial Number* _______________________________

Name* ___________________________________________________________________

Title ___________________________________________________________________

Organization* ___________________________________________________________________

Address* ___________________________________________________________________

City* ___________________________________________________________________

State/Province ___________________ Zip/Po stal Code ____________ Country* _________

Phone ___________________ Fax ___________________________________________

E-mail* ___________________________________________________________________

Youcan a lso register online at www. smarttech.com/p roducts/regis tration.

SMART Hub PE260

SMARTTechnologies

1207– 11 Avenue SW, Suite 30 0

Calgary,AB T3C0M5

CANADA

www.smarttech.com/support www.smarttech.com/contactsupport

0AVER02-99800-99)adanaC/.S.U(1976.815.668.1eerFlloTro0495.822.304.1+troppuS

registeredtrademarks of SMART Technologies ULCin Canada, the U.S., and/or other countries. Contents aresubject to change

withoutnotice.07/2008.

Administrative Measures for the Control of Pollution

Caused by Electronic Information Products

Namesand content of toxic and hazardous substances or elements in a SMART Hub PE260.

Toxic and Hazardous Substances or ElementsPart Name

Pb Hg Cd Cr6+ PBB PBDE

Functional Unit ? ? ? ? ? ?

Power Supply ? ? ? ? ? ?

Cabling ? ? ? ? ? ?

? Indicates that this toxic or hazardous substance co ntainedinall of the homogeneous materials for this

partis below the SJ/T11363-2006 limit requirements.

× Indicatesthat this toxic or hazardous substance contained in at least one of the homogeneous

materialsused for this part is above the SJ/T11363-2006 limit requirements.

SMARTHub PE260

系列交互式白板所含有毒有害物质的名称及成份

有毒有害物质或元素部件名称

铅

(Pb)

汞

（Hg）

镉

（Cd）

六价铬

（Cr6+）

多溴联苯

（PBB）

多溴二苯醚

（PBDE）

功能单元 ? ? ? ? ? ?

电源 ? ? ? ? ? ?

缆线连接 ? ? ? ? ? ?

?表示该有毒有害物质在该部件所有均质材料中的含量均在SJ/T 11363-2006 标准规定的限量要求以下

×表示该有毒有害物质至少在该部件的某一均质材料中的含量超出SJ/T 11363-2006 标准规定的限量要求

www2.smarttech.com/

kbdoc/127260

www2.smarttech.com/

kbdoc/127259

www2.smarttech.com/

kbdoc/123005

1 1

USB

×6

×3

zz (×6)

www.smarttech.com/support www.smarttech.com/contactsupport

Support +1.403.228.5940 or Toll Free 1.866.518.6791 (U.S./Canada)

Technologies ULC in the U.S. and/or other countries. All other third-party product and company names may be trademarks of their respective

owners. Other patents pending.

Contents are subject to change without notice. 07/2008. 99-00896-20 REV B0

Waste Electrical and Electronic Equipment Regulations

This section contains information about the Waste Electrical and Electronic Equipment Regulations (WEEE) that apply to all electrical and electronic equipment within the

European Union.

When you dispose of any electrical or electronic equipment, including SMART products, we strongly encourage you to contact your local WEEE recycling agency for

recycling and disposal advice.

Your SMART product required the extraction and use of natural resources for its production. It may contain hazardous substances.

By disposing of electrical and electronic equipment appropriately, you lower the impact of these substances upon health and the environment and reduce the pressure on

natural resources. Recycling agencies can reuse or recycle most of the materials from your product.

Please think about how you intend to dispose of any product that has a WEEE symbol or accompanying WEEE guidelines.

If you need more information on the collection, reuse and recycling of electrical and electronic equipment, please contact your local WEEE recycling agency. Alternatively, contact your local reseller