Smart2Ergo AGILE 1.2 User manual

AGILE 1.2
Sit-Stand Desk
FP-FR-01-0001-AI
www.smart2ergo.com
S2E_Assembly_Agile1.2_v1_2018

Customers please note that a product improvement has resulted
in a slight design change to the feet of this unit. This change
means that, in Step 6, the screws in the xing pack labelled “E”
have been replaced by 8 longer screws in the red bag found in
the “Metal Work Box”.
Best Regards,
The Smart2Ergo Team
1. Keep Hands clear of moving parts during
operation and always visually inspect the area
before adjusting the desk to avoid accidents
and damage to property.
WARNING!
Pinch point. Keep hands clear
during operation.
IMPORTANT SAFETY INFORMATION
2. Make sure no obstacles are in the desks
movement path and all the cords connected
to the desk are the appropriate length to
accommodate the change in height.
3. Keep children away from the desks electrical
components and ensure children are
supervised while using the desk.
4. Keep all electrical components away from
liquids.
5. Do NOT sit or stand on the desk frame or go
under the desk when in motion.
6. Do NOT place any objects taller than 550mm
under the desk.
7. Do not open or tamper with any of the
electrical components (Legs, Control panel,
Control Box and Power cable).
Height adjustable desks have electronic motors and control gear and are
designed for use in dry work areas ONLY.
www.smart2ergo.com

GE F
1x2
BOX 1
FIXINGS
ADDITIONAL ITEMS REQUIRED
BOX 3: Table Top if supplied.
45 mins
BOX 2
2x2
3x14x2
5x2
7x2
8x1
9x1
10 x1
A
x8
B
x10
C
x2
D
x4 x8 x8 x8
H
x8
K
x2
OR
6x1
x1
J
x1
I
NL M
RED BAG
x8
x8 x8
E, F & G have been replaced by the fixings L, M & N contained
in the red bag that has been packed into the metal work box.
CONTENTS

For User Manual and assembly videos,
please visit: www.smart2ergo.com/resources

1
2
1160 frame fits
1200mm top
1340 frame fits
1400mm top
1540 frame fits
1600mm top
1160mm Guide
1340mm Guide
1540mm Guide
5
2
4
9
D
D
x2

3
4
Cable MUST
be completely
inside slot!
10

5
6
7
A
x8
A
L
M
N
1
1
1
7
NL M
RED BAG
x8
x8 x8

7
8
B
H
30mm
centre
30mm
=
=
B
x8
H
x8
7
7
9
10
Feed Cables Through Frame
7
10
79
DO NOT PLUG
INTO POWER

9
10
K
K
x2
CONNECT
TO POWER
11 PERFORM COLUMN RESET:
A.
B.
C.
Press and hold both buttons.
Continue pressing the buttons until
both columns are in there Lowest position.
When reset is finished the control box makes
a sound and the buttons can be released.
THE SYSTEM IS NOW OPERATIONAL

13
12
3
6
D
D
x2
A
B
C
D

14
CONGRATULATIONS!
We hope you enjoy your new desk. If you
have any problems, call 08450 944 339.
Send us a photo of your new desk or any
feedback about your experience with
Smart2Ergo to [email protected].
For further info visit smart2ergo.com.

© Smart2Ergo 2017. All Rights Reserved.
for more info our website www.smart2ergo.com
call 08450 944 339 | email [email protected]
Hamilton Ofce Park, 5 High View Close, Hamilton, Leicester, LE4 9LJ, UK
Company no. 778 5384 | VAT no. 228 6570 87 |part of ksf supply ltd