Smartek ST-52 User manual

Handheld Garment Steamer
Model No. ST-52
Read all instructions carefully before using this item.
Keep this manual for future reference.

Handheld Garment Steamer
01
CONGRATULATIONtS
Congratulations on your new purchase! The
Smartek®ST-52 is an amazing handheld garment
steam appliance that gets rid of the most stubborn
wrinkles easier, faster and with less hassle than
traditional methods.

02
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions
should always be followed.
•Do not place the product too close to any heat emitting appliances
or in direct sunlight.
•Check that the voltage indicated on the data plate corresponds
with that of the local network before connecting the appliance to
the main power supply.
•Do not sumerge in water or any other liquids.
•It is imperative to unplug the appliance from the main power
supply after use, before cleaning.
•Close supervision is required when using this product near children.
•NEVER leave the appliance within reach of children.
•Repairs to electrical appliances should only be performed by a
qualied electrician. Improper repairs may place the user at
serious risk.
•This appliance is intended for household use only and should not
be used for industrial purposes.
•Do not operate this appliance with a damaged plug or cord, after a
malfunction, or after being dropped or damaged in any way.
•Do not use this appliance for anything other than its intended uses.
•Steam produced by this unit is hot and pressurized. Care must be
taken to avoid burns or other injuries.
•DO NOT shake the appliance while in use to avoid hot water
splashing out.

03
IMPORTANT SAFEGUARDS
•Always ensure the unit has cooled thoroughly before re-lling with
water, cleaning or storing.
•Always disconnect the appliance from the mains power supply
when lling or emptying water. Ensure the water tank is emptied
after each use before storing.
•DO NOT add chemicals or detergents to the water tank as they will
damage the unit.
•The nozzle and accessories become hot during use. Do not touch
the nozzle or attempt to change the accessories while the appliance
is in use.
•Always hold the unit upright and do not ll to exceed the Max mark
to avoid burns from splashing water.
•Use the unit with extreme caution with a tilted angle not more than
35℃ in any direction to avoid exce pilling from steam head.
•Always hold the unit away from the body and do not aim at people
or animals.
•Do not operate the appliance if the steam opening is blocked.
•Always drain the remaining water from the appliance after each
use to avoid mineral build-up in the heating plate.
•If the supply cord is damaged, it must be replaced by the manufacturer,
service agent or a qualied person in order to avoid a hazard.
•This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person responsible
for their safety.

DESCRIPTION OF THE APPLIANCE
04
1. WIDE STEAM NOZZLE
2. WATER TANK CAP
3. ON/OFF SWITCH
4. ERGONOMIC HANDLE
5. MAX WATER LEVEL
6. WATER TANK
7. POWER CORD SET
8. FABRIC BRUSH
9. LINT REMOVER
10. MEASURING CUP

ACCESSORY ASSEMBLY
05
ACCESSORY ASSEMBLY
•This appliance is supplied with two practical accessories:
Fabric Brush Smoothes wrinkles and creases from fabrics
Lint Remover-Removes lint and loose threads from fabrics
Follow the steps below to attach the accessories to the steam
nozzle:
•Ensure the unit is turned O and no steam emits from the nozzle.
•Choose the required attachment and slide onto the steam nozzle
as shown in Fig.1.
•Ensure the holes on the steam nozzle are aligned with the open
slots on the accessories so that steam does not get blocked.
•CAUTION: To avoid burns do not attach accessories to the nozzle
while steam is coming out of the nozzle.

Instructions
06
Filling the Water Tank
•Ensure the appliance is unplugged from the mains power supply.
•Place the Steamer on a at, stable surface.
•Carefully unscrew and remove the water tank cap.
•Fill the water tank with water using the supplied measuring cup.
•Fill the tank with cold water to the desired time level ensuring not
to exceed the MAX mark indicated in the water tank window.
Max-15-Steaming for 15 Minutes
10-Steaming for 10 Minutes
5- Steaming for 5 Minutes
•Replace the water tank cap ensuring it is thoroughly tightened.
CAUTION:
•After each use, always allow the unit to cool before lling with
water and shooting steam from the ll hole.
•Extreme caution is required when pouring water into the water
tank.
•Never ll water to exceed the Max ll line.
NOTE:
•Use of distilled or de-mineralized water is recommended to
prolong the life of the steamer.
•Use water only; do not use detergents or other chemical
substances.
•Mis use will lead to void warranty.

Instructions
06
Steaming Linens and Fabrics
Ensure the water tank has been lled and that the desired
accessory is connected and then follow the steps below:
•Plug the unit into the main power supply and switch it on.
•Switch the unit on and the button will illuminate to indicate the
appliance is on.
•Steam will emit from the nozzle after approximately 2 minutes.
•Direct the steam nozzle with either one of the accessories
towards the materials you wish to steam.
•Keep the ow of steam focused on the material being steamed.
Using a slight back and forth motion over the area you are
steaming further enhances the process.
CAUTION: Always be sure that the Steam Nozzle and any other attachments
are pointed in safe direction away from the user, other people and animals
when steam is emitting.
Steaming Garments
•Place the garment on a clean rust-free hanger.
•Direct the steam nozzle towards the bottom of the garment.
•Steam will rise on both the inside and the outside of the fabric
removing wrinkles and creases. Slowly slide steam nozzle
upwards from the bottom to the top of the garment.
•Direct the steam nozzle away from the garment and smooth the
fabric with your free hand.
•Repeat as necessary until the garment is crease-free.

Instructions
07
Storage
•Unplug the power cord from the main power supply.
•Allow the unit to cool thoroughly (at least cool-to-touch).
•Remove all attachments from the unit.
•Drain the remaining water from the water tank to minimize
potential mineral build-up. Loosely replace the water tank cap
but do not tighten as it may be dicult to unscrew for future use.
•Store all accessories with the unit in a dry, cool location.
Removing Mineral Build-up
•Dierent water sources contain minerals and the sediment may cause
mineral build-up in the steamer and aect the free ow of steam.
NOTE: The best way to avoid mineral build-up is to use distilled or
de-mineralized water. If you are unable to do this, it is recommended
to use the mineral build-up removal procedure.
•Unplug the unit and allow it to cool completely (at least cool-to-touch)
•Remove all accessories from the unit.
•Remove the water tank cap and drain any remaining water.
•Using a measuring cup, prepare a mixture of 0.125l. vinegar and
0.125l.water.
•Slowly pour the mixture into the water tank.
•Allow the unit to stand for 1-2 hours; drain solution when done.
•If the mineral build-up still remains in the unit, repeat the above
steps until all build-up is removed.
•Rinse the water tank with fresh water, drain and repeat until the
vinegar odour is eradicated.
•Replace the water tank cap.

Specications & Troubleshooting
08
Unit Weight (Bare): 0.7kg
Capacity: 320ML
Steam Output Time: 2 minutes
SteamDuration: 14 minutes
Voltage: 120V~ 60Hz
Wattage: 700W
er