Smartparts Digital Picture Frames User manual

5.6”
DIGITAL
PICTURE FRAME
User Manual

Table of Contents
Overview..............................................................2 What’s Included..................................................2 Getting Started Internal Memory and Memory Card Slot............................................................3 The Two Modes...............................................4-5 ViewYour Pictures Settings
Copying and Deleting Files............................5-6 Connecting to a Computer............................6-7 OptiPix™ Pro desktop software
......................8
Troubleshooting..................................................9 Technical Specifications & Warranty............10 Important Safety Precautions........................11
1

Overview • Your new digital picture frame lets you view photos all without a computer. • Photos can be viewed directly from memory cards or from the frame’s built-in memory.
What’s Included Included in the box should be: • OptiPix desktop software • Digital picture frame • AC power adapter • User manual • USB cable
2

Getting Started To begin using your digital picture frame right away, follow these simple steps. 1. Connect the AC power adapter to the frame and plug the adapter into an electrical outlet. (100-240V, 50-60Hz) 2. Insert a memory card into the appropriate card slot on the side of the frame. 3.Turn the frame on either by pluging in the frame to a power source or press and hold the OK button on the back of the frame. 4.A slideshow will begin automatically.To stop the slideshow press Exit. Internal Memory and Memory Card Slots Your digital picture frame includes 128 MB of built-in memory. The slot marked SD/MMC/MS/xD is meant to be used for your regular memory card, such as the one you use in your camera. To select from the various types of memory, press Exit until the memory devices are highlighted at the bottom of the screen, and then use the left and right arrow buttons to select the desired memory type. Press OK to access the selected memory type.
3

ViewYour Pictures Highlight Pictures and press OK. Use the arrow buttons to highlight the photo you want to view. Press OK to view the photo. While viewing a single photo you can move to the previous or next photo by using the left and right arrow buttons. The up and down arrow buttons are used to rotate the photo on the screen. To see a slideshow of your pictures, press the OK button. To end the slideshow, press Exit
Settings Highlight Settings and press OK. Use the up and down arrow buttons to highlight the setting you would like to change and press OK to access it. Slideshow – Press OK to start the slide show. Multiple Picture Display – Turning this feature on will result in photos being displayed on the screen four at a time.
4

Slideshow Transition – This allows you to choose from among several transition effects. Slideshow Speed - The slide show speed can be set to Fast, Normal or Slow. Display Image Size – Select Original to have your photos show in their original shape even if they do not match the shape of the screen. Select Optimal to have your photos fill the screen (some cropping may occur). Auto Power – Select Auto Power to schedule your digital picture frame to turn On and Off at any time of the day.The internal Clock must be programmed for the Auto Power function to work properly. Clock – Select Clock to program the internal clock for the digital picture frame.
Copying and Deleting Files Photos, can be deleted or copied to another type of memory. For example, you can copy your pictures from the memory card you normally use in your camera to the Internal Memory. To copy one photo, highlight the thumbnail, press and hold the Exit button. Highlight Copy Selected and press OK. Only the available memory types will be shown. Highlight the type of memory that you want to save your picture to and press OK.The picture will be copied.
5

To copy multiple pictures at once you can select them before accessing the Copy Selected function.To select a photo for copying, highlight it in the thumbnail screen and press and hold the Up button on the back of the frame. A check mark will appear in the corner of the thumbnail. Select all the photos you would like to copy and then press Exit and Copy Selected as described above. To copy all photos from one type of memory to another, press the Exit button on the frame for three seconds. Highlight Copy All and press OK.The pictures will be copied. To delete, highlight the file or files as above and select the delete option from the menu.
Connecting to a computer Using the supplied USB cable, you can connect your digital picture frame to a computer to transfer files between the two devices. With the frame turned off, connect the small end of the cable to the frame and the large end to your computer. Turn the frame on and allow the computer a few moments to recognize the device.The frame’s internal memory and any memory cards inserted in the frame will appear as external storage devices on the computer.
6

Compatible picture files can be copied to the internal memory or memory cards in the frame through normal copy-and-paste or drag-and-drop methods. By using Smartparts OptiPix™Pro desktop software you can optimize and transfer pictures in three easy steps: 1. Find the pictures to transfer 2. Optimize your pictures 3. Finally, transfer your pictures to your frame and enjoy the slide show! The frame must be disconnected from the computer to display photos. Please refer to pg. 8 for more detailed information.
7

OptiPix™ Pro desktop software
OptiPix Pro Desktop Software is designed to help you find, optimize and transfer pictures to your frame. OptiPix Pro will help you: • Correct picture orientation • Enhanced and sharpen picture quality • Easily find and transfer pictures to your frame • Automatically re-size pictures so you can fit more pictures on your frame • Fit pictures to screen size without distortion OptiPix Pro will not alter your original picture files – it will create copies that will be optimized and transferred to your frame. Using Optipix Pro you can store up to 2,000 pictures in your frame! How to install - The software’s installation file is preloaded on the frame’s internal memory.To install it on your Windows computer, perform the following steps: 1. With the frame turned off, connect it to your computer using the supplied USB cable. 2. Turn on the frame and wait several seconds for the computer to recognize it as a new device. 3. On the computer, click on the Start menu, and select My Computer. 4. Within the My Computer window, double-click on the drive with the label that matches the model number of your digital picture frame.The model number usually begins with SP. 5. In the window that opens, double-click on the setup file and follow the on-screen instructions. After OptiPix Pro is installed on your computer, remove the setup file from the frame’s memory to allow more room for photos.You can move the file to your hard drive if you’d like, or simply delete it.
8

Troubleshooting
9

Technical Specifications
Display (480x234) 5.6 inches TFT full-color Connecting computer High speed USB 2.0 Memory Flash memory: 128MB Power supply DC12V 500 mA AC ADAPTER Picture format JPEG Memory card SD/MMC/MS/xD Language selection
English, Spanish, French
Supported operating systems Windows ME/2000/XP/Vista
10

This device complies with Part15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that cause undesired operation.
11