Smartparts 12.1" User manual

Insert AC Power adapter into the input jack.
Plug the power adapter into an electrical outlet.
Insert memory card
into the card slot labeled SD/MMC/MS/xD or the card slot labeled CF.
Switch on the frame Automatic slideshow will begin in a few seconds.
1
2
3
For additional features and instructions please refer to the user manual.

Table of Contents
1
Important Safety Precautions.......................2 What’s Included...............................................3 Introduction......................................................4 How to Display the Frame..................................5 Getting Started How to Insert Memory Card How to Select Memory Card..............................6 The Three Modes.........................................7-9 ViewYour Pictures Listen toYour Music ViewYour Videos Settings
Copying and Deleting Files...........................10 Connecting to a Computer...........................11 SyncPix™ Desktop.........................................12 Troubleshooting.............................................13 Technical Specifications & Warranty.........14

Always follow these basic safety precautions when using your
digital picture frame.This will reduce the risk of fire, electric
shock, and injury.
Warning: To reduce the risk of fire or shock hazard, do not
expose this product to rain or moisture.
Warning: To prevent the risk of electric shock, do not
remove the cover.There are no user-serviceable parts inside.
Refer all servicing to qualified personnel.
• The digital picture frame is for indoor use only.
• Unplug the digital picture frame before performing
care and maintenance.
• Do not block the ventilation holes on the back of the
digital picture frame at any time.
• Keep your digital picture frame out of direct sunlight
and heat sources.
• Protect the power cord. Route power cords so that
they are not likely to be walked on or pinched by items
placed on or against them. Pay particular attention to
the point where the cord attaches to the digital picture
frame.
• Only use the AC adapter included with the digital
picture frame.
Using any other power adapter will void your warranty.
• Unplug the power cord from the outlet when the unit
is not in use.
Important Safety Precautions
2

What's Included
Digital Picture Frame
AC Power Adapter (9V, 2.0A)
This User's Guide
Remote Control
USB Cable
Stand
Power input jack
USB Ports
Stand
5 Way button
Light sensor
Memory card slots
3

Introduction
4
• Your new digital picture frame lets you view photos and
videos and listen to music – all without a computer.
• An automatic, continuous slide show lets you enjoy all of
your photos with ease.
• The included remote control makes it simple to select
photos, change settings, and more.
• Photos can be viewed directly from memory cards or from
the frame’s built-in memory.
• The frame can be connected to a computer to quickly and
easily transfer pictures from your hard drive.
Congratulations on your new Smartparts SyncPix™ digital
picture frame! SyncPix™ frames include revolutionary
technology that makes transferring photos from a memory
card to the frame virtually effortless.
Your new picture frame does some amazing things.

5
How to Display the Frame
To begin using your SyncPix™ digital picture frame, start by
connecting the stand or hanging the frame on a wall.
The stand is connected by inserting the round knobs at the
top into the opening on the back of the frame and sliding it
upward. The display angle of the frame can be adjusted by
sliding the stand up or down. The frame can be displayed
vertically by rotating the stand 90 degrees counter-clockwise.
The slot on the back of the frame can also be used to hang
the unit on a wall.

6
Getting Started
How to Insert Memory Card
There are two memory card slots on the side of the digital
picture frame. The smaller slot is for Secure Digital™, Multi-
Media Card™, Memory Stick™, Memory Stick Pro™,
Memory Stick Duo™, Memory Stick Pro Duo™ and xD
Picture Cards.The larger slot will accept Compact Flash cards.
A card can be inserted in only one direction. It should fit
snugly when properly inserted. Do not force a card or you
will risk damaging your digital picture frame and the card.
How to Select Memory Card
To select from the various types of memory, press Exit until
the memory devices are highlighted at the bottom of the
screen, and then use the left and right arrow buttons to select
the desired memory type. Press OK to access the selected
memory type.
To begin using your digital picture frame right away, follow
these simple steps.
1. Connect the AC power adapter to the frame and plug
the adapter into an electrical outlet. (100-240 V, 50-60Hz)
2. Insert a memory card into the appropriate card slot, or
plug a USB flash drive into the USB port on the side of the
frame.
3.To turn on the frame press the switch to the side of the
frame to the on position.
4. Slide show begins automatically.To stop press Exit.

7
The Three Modes
There are three modes for using your digital picture frame. To change modes, press the Exit button until the options on the left side of the screen are highlighted. Use the up and down arrows to highlight the desired mode and then press Enter ViewYour Pictures Highlight View Your Pictures and press OK. Use the arrow buttons to highlight the photo you want to view. Press OK to view the photo.While viewing a single photo you can move to the previous or next photo by using the left and right arrow buttons.The up and down arrow buttons are used to rotate the photo on the screen. To see a slide show of your pictures, press the Slideshow button on the remote control.To end the slide show, press Exit. Listen toYour Music Highlight Listen to Your Music and press OK. Use the up and down arrow buttons to highlight the song you want to hear and press OK to play the song.To stop, press Exit.Your digital picture frame can play music files in the WMA file format. If music files are present, the music will also be played in the background during the slide show.

8
ViewYour Videos Highlight View Your Videos and press OK. Use the up and down arrow buttons to highlight the video clip you want to watch and press OK.To stop the video, press Exit.Your digital picture frame can play video clips that are in the AVI Motion JPEG format, up to 640x480 resolution and up to 30 frames per second. Settings Highlight Settings and press Enter. Use the up and down arrow buttons to highlight the setting you would like to change and press Enter to access it. Slide Show – Press enter to start the slide show.This is how you would start the slide show without the use of the remote control. Multiple Picture Display – Turning this feature on will result in photos being displayed on the screen four at a time. Slide Show Transition – This allows you to choose from among several transition effects. Slide Show Speed - The slide show speed can be set to Fast, Medium or Slow.

9
Display Image Size – Select Original to have your photos show in their original shape even if they do not match the shape of the screen. Select Optimal to have your photos fill the screen (some cropping may occur). Repeat – Select Repeat One to have each individual video or music file repeat continuously. Select Repeat All to have all video or music files repeat continuously. Select Repeat Off to have video or music files played only once. Clock – Select On to have a clock displayed on the menu screen. After pressing On the year will be highlighted. Use the up and down arrow buttons to change the number, then use the right arrow button to move to the next number. Continue until the date and time are correct and then press OK. Alarm – Select On to use the alarm function.The alarm can be set to ring at a specific time each day.The hours and minutes are set in the same manner as used in setting the Clock. Light Sensor -- When activated, the frame's built-in light sensor automatically turns the frame off when the room is darkened and back on when it is light. Language – Select English, French or Spanish. Reset Settings – Select Yes to restore your digital picture frame to its factory default settings.

10
Copying and Deleting Files
Photos, music and video files can be deleted or copied to another type of memory. For example, you can copy your pictures from the memory card you normally use in your camera to the Expansion Memory or Internal Memory. To copy one photo, highlight the thumbnail and press the Menu button. Highlight Copy Picture to and press OK. Only the available memory types will be shown. Highlight the type of memory that you want to save your picture to and press OK.The picture will be copied. To copy multiple pictures at once you can select them before accessing the Copy Picture to function.To select a photo for copying, highlight it in the thumbnail screen and press the UpVolume button on the remote control. A check mark will appear in the corner of the thumbnail. Select all the photos you would like to copy and then press Menu and Copy Picture to as described above. Copying music and video files is done in a very similar manner. However, to select multiple files, use the right arrow button to add the check mark next to each file. To delete, highlight the file or files as above and select the delete option from the menu.

11
Connecting to a computer
Using the supplied USB cable, you can connect your digital picture frame to a computer to transfer files between the two devices. With the frame turned off, connect the small end of the cable to the frame and the large end to your computer. Turn the frame on and allow the computer a few moments to recognize the device.The frame’s internal memory and any memory cards inserted in the frame will appear as external storage devices on the computer. Compatible picture, audio and video files can be copied to the internal memory or memory cards in the frame through normal copy-and-paste or drag-and-drop methods or by using Smartparts Sync™Pix desktop software you can optimize and transfer pictures in three easy steps: 1. Find the pictures to transfer 2. Optimize your pictures 3. Finally transfer your picture to your frame and enjoy the slide show! The frame must be disconnected from the computer to display photos or videos or play music.

12
SyncPix™ Desktop You can also use SyncPix desktop software with your SyncPix frame. Visit www.syncpix.com to download your complementary copy of the software. Use SyncPix Desktop to do the following: • SMART COPY - Copying your pictures from your computer to your frame is as easy as 1-2-3 • SMART FIT – Using advanced image understanding technology, photographs can be automatically focused on the most important areas without distorting the picture. A Smartparts’ EXCLUSIVE! • SMART SCALE – Automatically corrects for rotation, optimizes the size and characteristics of each photo to match your particular frame allowing the frame to hold up to 2000 pictures. • SMART VIEW - Convert pdf, powerpoint, and many image formats for viewing on your picture frame.

13
Troubleshooting

14
h
h
Technical Specifications
Product :
Input Formats:
File Format: JPEG, AVI Motion JPEG, MPEG-1, MP3
Internal Memory:
256MB
USB Ports:
Mini-USB (for file transfer)
USB (for USB Flash Drives)
Power Input: 100V -240V AC, 50~60HZ
Power Output:
12V DC, 1.5A
Features:
Play picture, music & video files
Auto-optimization of photos
Extendable/removable stand
Remote control
Variable speed slide show
Range of transition styles for slide show
Warranty
Smartparts, Inc. warrants its digital picture frames against manufac-
turing defects for a period of 90 days from date of purchase.
For technical support, please visit our web site at:
www.smartpartsproducts.com.
12” LCD Digital Picture Frame with
SyncPix™technology
Secure Digital™ , Multi Media Card™ ,
Compact Flash™ ,xD-Picture Card™ ,
Memory Stick™ ,Memory Stick PRO™,
Memory Stick Duo™, Memory
Stick PRO Duo™ and USB Flash Drives