Smartparts SP-DPF84BW User manual

www.smartpartsproducts.com Page 1
USER MANUAL
Digital Picture Frame
SP-DPF84BW

www.smartpartsproducts.com Page 2
Table of Contents
Overview .................................................................................................... 4
Features ..................................................................................................... 5
Getting Started ...........................................................................................5
a. Unpacking your Digital Picture Frame 5
b. Connecting the frame to the Power Supply 6
c. Connecting the frame to a computer 6
Changing and Adding Pictures ……………………………………….....6
a. View contents on your memory card 6
b. Formatting pictures on your computer 7
Product Diagram ………………………………………………………….8
Viewing Pictures …………………………………………………..……..10
a. Turning the frame on 10
b. Selecting the mode 10
The Photo Folder ………………………………………………………...10
a. Viewing a picture 10
b. Rotating a picture 10
c. Slideshow mode 11
d. Delete a picture 11
The Music Folder …..………………………………………………..…..11
a. Playing Music 11
b. Play / Pause Music 11
c. Volume 12
The Video Folder .…..………………………………………………..…..12

www.smartpartsproducts.com Page 3
Set Up Menu …………………………………………………………....12
a. Photo Options 12
b. Music Mode 13
c. Movie Mode 14
d. Systems Mode 14
Warranty and Technical Support ……………………………………...14

www.smartpartsproducts.com Page 4
Overview
¾The SP-DPF84BW Digital Picture Frame lets you view
your digital pictures and listen to your MP3 music from
memory cards.
¾You can enjoy or edit your photos any time and
anywhere.
¾The frame is an ideal way to display your digital
photographs.
¾The Slide Show mode is a convenient method to display
all your pictures in a continuous mode – it offers you
many pre–programmed transitions from slide to slide.
¾Most functions of your digital picture frame can be
controlled from the enclosed Remote Control.
¾The Digital Picture Frame doesn’t require a direct
connection to a computer – the built-in card reader can
read memory cards.
¾It supports most popular types of memory cards and file
formats.
¾The digital picture frame is a digital photo album that
let’s you display hundreds of pictures anywhere in your
home or office.
¾It can be connected to a computer and pictures can be
up-loaded (from computer to memory card) or
downloaded (from memory card to computer).
¾Music in the MP3 format can be played on the Digital
Picture Frame.
¾The frame should not be “On” for more than 10
hours at a time.

www.smartpartsproducts.com Page 5
Features
¾The SP-DPF84BW supports JPEG photo files, MP3 music
files, and AVI video files.
¾The resolution of the screen is 640x480.
¾Compatible with: Compact Flash (CF), Secure Digital (SD),
Multimedia Card (MMC), Memory Stick (MS) and Xtreme
Digital (xD) memory cards.
¾USB 2.0 connection – compatible with Windows XP and
Windows 2000.
¾The frame allows user to delete, rotate and/or pan pictures,
play music (MP3 format), play movie clips (AVI format),
create slide shows and move pictures between the
memory cards and a computer.
Getting Started
The following chapter provides step-by-step instructions on setting
up your Digital Picture Frame for the first time.
a. Unpacking your Digital Picture Frame
The box should include:
-SP-DPF84BW digital picture frame
-User Manual
-Remote Control
-USB cable
-AC Power Adapter

www.smartpartsproducts.com Page 6
b. Connecting the frame to the Power Supply
Use only the supplied AC power supply. Make sure that the
frame’s power switch is in the OFF position before you
connect or disconnect the power supply.
Plug the AC power supply only into a 120 VAC 60 Hz (regular
North American) wall outlets – connecting the frame to a
different power source or wall outlet will harm the unit and
void the warranty.
c. Connecting the frame to your computer (optional)
Use the supplied USB cable and connect the frame to your
computer.
The Hardware wizard will show that you connected a new
device and will recognize it as a disk drive.
No software needs to be installed. Just follow the start menu
and click on “My Computer” – your memory card will be listed
under “Devices with Removable Storage”. You can open it by
double clicking on the icon representing your memory card.
Most likely this device will be named after the manufacturer of
your memory card.
There will be no data available as long as you do not insert a
memory card into your frame.
Once you insert a memory card you will see the respective
drive on your computer and you will be able to access your
pictures and the frame can act as a regular card reader.
Please note that the Digital Picture Frame will not display
pictures while it is connected to a computer. Please
disconnect the USB cable to view pictures.

www.smartpartsproducts.com Page 7
Changing & adding pictures on your memory card
The following section provides instructions on how to format and
transfer pictures from your computer to your memory card for
viewing in your Digital Picture Frame.
Formatting the Pictures on your computer
The required file format for the Digital Picture Frame is JPEG.
However, there are different variations of the JPEG format
and not all formats can be read by the Digital Picture Frame
or your Digital Camera.
We recommend using standard Microsoft picture editing
software to save your pictures in JPEG format. Even
PHOTOSHOP or PHOTOSHOP ELEMENTS files should be
opened in a standard Microsoft Picture Editor and saved as a
JPEG file to the memory card.
We also recommend naming the pictures without using
underscores or more than four number digits in the name.
For more technical help, please visit our web site at
www.smartpartsproducts.com.

www.smartpartsproducts.com Page 8
Side View - Ri
g
ht
To
p
View
Product Diagram
Side View - Le
f
t
1. USB Connection
2. Mini USB Connection
3. Power Connection
4. SD, MMC, MS, xD Slot
5. CF Slot
3
2
1 4
5
Enter Menu Stop/Esc Left Right Down Up

www.smartpartsproducts.com Page 9
Hold the remote control, push the button right, and pull the button to
the outside. Then put the battery (Model CR2025) into the button with
“+” Polarity facing up, and then push it back to the place.
“+”Polarity is up
Remote Control
Remote Control - Maintenance
•
Press the red On/Off button to turn
power on or off. (Note: Switch on
back of frame must be in On
position.)
•The 16:9/4:3 button is not functional
with this model frame.
•Use the Volume buttons to increase
or decrease the volume.
•Press the Rotate button to turn
photos that were taken vertically.
•Press Setup to access the menus.
•Press Exit to go back.
•Use Zoom to enlarge a section of a
photo, then the arrow buttons to
move the photo.
•Press Slide Show to begin a slide
show.
•Use the Play/Pause and Stop
buttons on the bottom row when
p
la
y
in
g
music or video cli
p
s.

www.smartpartsproducts.com Page 10
Viewing Pictures
a. Turning the Frame on
Connect your Digital Picture Frame to the AC adapter.
Insert a memory card into the respective slot.
Turn the power switch on.
Selecting the Mode
The first screen you will see shows the symbols for the
different types of memory cards. Please select the type
that corresponds with the type of card you are using. The
frame should automatically detect the right card format
and highlight it on your screen.
Make the selection by using the ENTER button.
The frame will display four folder symbols – you can
navigate from Folder to Folder using the Left / Right
button on your remote control or your frame. To select
your folder please press ENTER.
The Photo Folder
The frame will now preview all the pictures that are on the
card. The frame will display 9 pictures in the preview
mode at a time. You can scroll up and down using the up
and down arrow buttons on your remote control. You can
use the arrow buttons to select an image. A selected
image has a yellow border around it.
a. Viewing a Picture
Once you select your picture in the preview mode you can
display the full picture by pressing the ENTER button
b. Rotating a picture
If a picture was taken vertically – you can select the
picture and press the Rotate button on the remote to

www.smartpartsproducts.com Page 11
rotate the picture. You can also use the up or down arrow
buttons on the top of the frame.
c. Slideshow
Select any picture in the preview mode and press
ENTER. Then press SLIDESHOW on your remote control
or frame.
The frame will display all your pictures in a slide show. It
will show all your pictures continuously.
To return to the PREVIEW mode – just press the EXIT
button on your remote control.
d. Delete or copy a picture
While in the preview mode (multiple pictures on your
screen) you can delete one or all pictures on your card.
Make sure you are in the preview mode and press the
Set-Up button on your remote control.
Select the function Delete or Delete All and press enter.
The file will be deleted from your card.
Press the Exit button to get back to the previous menu
and leave the Set Up mode.
The Copy and Copy All options allow you to copy from
one memory card to another when two are inserted in the
frame.
The Music Folder
The frame will now preview all the MP3 music / sound
files that are on the card. The frame will display 8 files in
the preview mode at a time.
You can scroll up and down using the up and down arrow
buttons on your remote control.
You can use the arrow buttons on your remote control or
on the Digital Picture Frame to move from one file to
another.
You can always exit the music player by pressing the Exit
button and return to the Preview menu. Pressing Exit
again will bring you back to the Mode Selection Menu.

www.smartpartsproducts.com Page 12
a. Playing Music
Once you have selected your music file in the preview
mode you can play the file by pressing the ENTER button.
b. Play / Pause
You can Play / Pause and Stop the music file.
c. Volume
You can turn up or turn down the volume using the
Volume buttons on your remote control.
The Video Folder
If your memory card contains AVI format videos, enter the
Video Folder to display them. Select the file you want to
view and press Enter to start. The Pause/Play and Stop
buttons can also be used, along with the volume controls.
The File Folder
The frame will now preview all the files on your card. If
they are picture or video files you will see a low resolution
version of the picture or first frame of the video.
The Set Up Menu
The Set Up menu let’s you pre-set some of the major functions on
your frame.
Press the Set-Up button on your remote control while you are in
the Select Mode or Select Card Mode!

www.smartpartsproducts.com Page 13
The menu gives you 4 Main Choices:
PHOTO
MUSIC
MOVIE
SYSTEM
And the choice to EXIT.
a. Photo Option
In this mode you can pre-set the options for displaying your
pictures and particularly the options for your slideshow.
You select your options by pressing Enter and return to the
previous menu option by pressing the Exit button.
INTERVAL
This option lets you set the “time” for the transition
between slides in the slideshow mode. You have the option
to select from 4 different speeds.
TRANSITION
This option lets you preset the transitions between slides in
the Slideshow mode.
You can choose from 8 different transition modes.
We suggest you choose the “Random” option. This option
will pick on its own the different transition modes and apply
them to different pictures.
SLIDE MUSIC
This option lets you choose to run music while displaying
your pictures in the Slideshow mode.
This option only applies if you have MP3 files on your
memory card along with your pictures.
b. Music Mode
In the Music Mode you can preset some basic playing
options for your MP3 files. The Repeat function lets you

www.smartpartsproducts.com Page 14
preset whether you repeat your songs one at a time or
none of them.
c. Movie Mode
Like the Music Mode, this mode lets you control whether
videos are repeated.
d. System Mode
The System mode lets you preset your language.
Warranty and Technical Support
Please refer to our website at www.smartpartsproducts.com
for Technical Support and Warranty information.