Smartparts 3.5'' User manual

PICTURE FRAME
DIGITAL
User’s Manual

Congratulations on purchasing the 3.5” digital picture frame. Carefully
read and follow all warnings and instructions in this manual before you
begin to use this digital picture frame. Failing to follow the warnings can
result in personal injury or damage to the digital picture frame.
Important:
Please keep this user manual in a convenient location for future
referencing.
Overview
• Your new digital picture frame lets you view photos without a
computer.
• An automatic, continuous slide show lets you enjoy all of your
photos with ease.
• The built-in stand pulls out to easily stand the frame on any flat
surface.
• Photos can be viewed directly from memory cards or from the
frame’s built-in memory.
• The frame’s built-in rechargeable battery makes it easy to carry
the frame with you wherever you go.
1

2
Power input
USB Port
Menu
Select
Right
Left
Power
Exit
SD/MMC Card Slot
What’s Included
Included in the box:
• Digital Picture Frame
• User Manual
• USB cable (Use to charge)
• Protective Micro-fiber
Carrying and Cleaning Case

3
To begin using your digital picture frame right away, follow these simple
steps.
1. Connect the frame to a computer’s USB port using the mini USB
cable to charge the frame. Once fully charged you can use the
frame for up to 2 full hours.
2. Once the frame is fully charged insert a memory card (SD/HC or
MMC) into the card slot on the side of the frame.
Be sure that the logo on the memory is facing you when inserting
the card into the slot.
3. A slide show will begin automatically.To stop the slide show press
button twice.
Internal Memory and Memory Card Slot
Your digital picture frame has the capacity to hold up to 30 pictures.
The slot marked SD/MMC is meant to be used for your regular memory
card, such as the one you use in your camera.
To select from the various types of memory, press button
until you see “Select Card” screen.To select the desired memory type
use the or button. Press to access the
selected memory type.
Getting Started

4
Thumbnail Screen
This screen shows thumbnail versions of all photos on the selected
memory source. Six photos are displayed at a time. Use this screen to
select a single photo to display, or to start a slide show of all of the
photos.
Viewing a Single Picture:
1. Press or to navigate through your
pictures
2. Once you have selected a picture of your choice, press
button
3. Your selected picture will display on the screen
4. To start slideshow press button at any time
5. To pause the slide show at any time press button
5. To resume slide show press button
4. To return to the thumbnail view press button twice if in
slide show mode. If paused press button once to return
to thumbnail view.
Start Slideshow of Pictures:
1. To start a slideshow from the thumbnail view press and hold
button
2. A sub menu will appear on the bottom left hand corner
3. Use or buttons to select ‘Start Slideshow’
4. Press to start slideshow

5
Other Options
In the slide show mode, you can press and hold down the
button to access the following: Rotate Photo, Zoom Photo, Copy
Photo, Delete Photo, Adjust LCD Color. To exit at any time
press button.
Rotate Photo:
Using the or buttons highlight ‘Rotate Photo’. Press
to rotate the picture on screen.To exit press
button.
Zoom Photo:
Using the or buttons highlight ‘Zoom Photo’. Press
to zoom in and out of the picture displayed on screen.
To exit press button.
Copy Photo:
(This option is only available when viewing pictures from memory card)
Using the or buttons highlight ‘Copy Photo’. Press to
copy the picture on screen to the internal memory.To exit press
button.

6
Delete Photo:
(This option is only available when viewing pictures from internal
memory) Using the or buttons highlight ‘Delete Photo’.
Press to delete the picture on screen.To exit press
button.
Adjust LCD Color:
Using the or buttons highlight ‘Adjust LCD Color’. Press
to adjust the display.You will have the option to adjust
brightness, contrast, tint, and color. Press and hold or buttons
to change options from brightness to color, the selected option will be
highlighted in blue with a white border. Continuously pressing the
button will increase the amount and pressing the button will
decrease the amount. Once you have made your adjustments press
button to exit this screen.

7
Display Settings and Tools
Additional settings will allow you to access the following: Display
image size, Slideshow transitions, Slideshow Speed,
Connect to PC, Power Saving, Factory Default.
Press button until you see the ‘Select Card’ screen. Press and
hold button until the dislpay settings appear.
Use or buttons to highlight your selection. Press
to make changes. Press button to exit a
selected option.
Menu Option Sub- Menu Option Description and function of operation
Display image size Original Picture displays as is
Optimal Picture will be adjusted to fit the
display screen
Slideshow
Transitions
Normal
Select Transition Effect
Random
Top Bottom
Curtain
Open Door
Cross Comb
Slideshow Speed Fast
Select Transition Effect
Medium
Slow
Language English (only) Visit www.smartpartsproducts.com for updates.
Connect PC… Refer to Optipix Desktop Software section for instructions
Power Saving Select your power saving options
Factory Default Resets the frame to factory settings

8
Recharging the Frame
Your Digital Picture Frame charges directly from the USB cable. Simply
plug your Digital Picture Frame into your computer using your USB
Cable. A full charge takes approximately 2 hours to complete.
Indicates that the battery power is low and needs charging
Indicates that the charging in progress
Indicates that the Digital Picture Frame is completely charged
OptiPix™ Desktop Software
OptiPix is complimentary with every Smartparts, Inc. digital picture frame.
Visit us on the web at www.optipix.com to get your copy. Just enter your
email address and your frame’s serial number to download the software.
OptiPix™PRO is designed to help you find, optimize and transfer pictures
to your memory card.The software, residing on your computer,
will guide you through 3 Easy Steps:
1. Select your pictures
2. Optimize your pictures
3. Transfer your pictures
OptiPix™PRO will help you:
• view your vertical photos the right way
• sharpen your photos
• find and transfer photos to your frame
• fit more pictures on your frame
Note: Pictures can not be transferred directly from your computer into the
frame’s internal memory. Please use OptiPix™ dektop software to save your
pictures to your memory card.

9
FAQs
1. How to power on/off?
To power on press button
To power off press and hold down button for 3 seconds
2. How to browse through your photos?
Press or buttons to browse through pictures
3. How to copy a single photo from SD card to internal memory?
If in thumbnail view press and hold button until a
sub menu appears on the bottom left hand corner. Use the
or buttons to select “Copy Photo’. Press button to
make the selection. Select ‘Copy Selected’ by
pressing button.‘OK’ will display when the transfer
is completed.
4. How to delete photo from internal memory?
Choose the photo you want to delete in the internal memory and
hold the button for 3 seconds, release then choose 'Delete
Photo', then select ‘Delete Selected’. Finally press button to
confirm delete.

10
Technical Specification
Product: 3.5” Digital Picture Frame
Resolution: 320x240 pixel QVGA
Button: 4 Buttons(Power/Exit, Menu/ Select, Left/Up, Right/Down)
USB interface: USB 2.0 full speed
Internal Memory: Saves up to 30 photos at low picture size
File formats: JPEG
Display Colors: 16.7M Colors
Dimensions: 95x77x13(mm)
Power: li-ion poly battery 3.7V last up to 2 hours when fully charged
Charger: Charged by USB port
Certifications: RoHS/CE/FCC

11
Important Products Safety Instructions
• Always handle the Digital Picture Frame with care.
• Avoid touching the LCD screen. Finger prints may be difficult to
fully remove.
• Always position the Digital Picture Frame on a stable and level surface.
Unstable surface can cause the Digital Picture Frame to topple and
fall which will result in possible damage.
• Avoid exposing the Digital Picture Frame to direct sunlight or high
temperatures.This may result in damage.
• Do not place it near heat sources such as radiators, heat registers
or other appliances that generate heat.
• Orient the Digital Picture Frame away from direct sunlight to reduce
glare.Avoid exposingthe Digital Picture Frame to rain,water, moisture,
or high humidity.
• Do not place it near basins or sink where it may come in contact
with water.
• Never place heavy or sharp objects on the LCD panel, frame or USB
cord.
• Keep the Digital Picture Frame well ventilated and away from high
temperatures to avoid damaging the Digital Picture Frame.

12
Other Notice and Precautions
Caution:
Never remove the plastic casing.There are no end user serviceable parts
inside. Do not attempt repairs yourself.The warranty does not cover repairs
or attempted repairs by anyone not authorized by the Authorized Dealer.
If the frame begins to emit smoke, abnormal noises, or a strange odor,
immediately turn it off. Contact the authorized dealer's services center.
Cleaning the Digital Picture Frame
MAKE SURE THE DIGITAL PICTURE FRAME IS TURNED OFF
HINT:The micro-fiber carrying case works best to clean the screen.
How to clean the screen:
1. Wipe the screen with a clean, soft, lint-free cloth. Use the micro
fiber protective carrying case to wipe the screen clean.This
removes dust and other particles.
2. If it is still not clean, apply a small amount of nom-ammonia, non-
alcohol based glass cleaner on a clean, soft, lint-free cloth to clean
the screen.
How to clean the plastic casing:
1. Use a soft, dry cloth.
2. If it is still not clean, apply a small amount of nom-ammonia, non-
alcohol based and mild non-abrasive detergent on a clean, soft,
lint-free cloth to clean the surface.

13
Disclaimer
Authorized dealer does not recommend the use of any ammonia or
alcohol-based cleaners on the LCD screen or plastic casing. Some
chemical cleaners have been reported to damage screen and/or display
case.Authorized dealer will not be liable for damage resulting from the
use of any ammonia or alcohol-based cleaners.
NEVER SPAY OR POUR LIQUIDS DIRECTLY ONTOTHE SCREEN
OR PLASTIC CASING
Technical Support
Smartparts’ technical support is available via:
1. Visit us online at www.smartpartsproducts.com
2. Email us at techsuppor[email protected]
3. Call us at 888-796-2749
Warranty
Smartparts, Inc. warrants its digital picture frames against manufacturing
defects for a period of 90 days from the date of purchase. For warranty
claims, please visit our web site at www.smartpartsproducts.com.