Smartwares CIP-39901 User manual

CIP-39901
Installation and Operating Instructions
PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE USING THIS PRODUCT
AND KEEP THIS MANUAL FOR FUTURE REFERENCE.

CONTENTS
OVERVIEW ...................................................................................................... 2
Please Read Before You Start ..................................................................................3
Wireless Device Operating Range ............................................................................3
Important Safety Precautions ....................................................................................3
KIT CONTENT ................................................................................................. 4
SAFETY AND INSTALLATIONTIPS ................................................................ 5
PRODUCT OVERVIEW .................................................................................... 6
INSTALL YOUR DEVICE ................................................................................. 7
ETHERNET CONNECTION (OPTIONAL) ........................................................ 7
CAMERA SETUP INSTRUCTION .................................................................... 8
GUARDIAN APP DOWNLOAD AND INSTALL ...............................................11
Guardian app Setup ................................................................................................11
SMARTWARES VIEW APP OVERVIEW ........................................................15
LIVE VIEW............................................................................................................. 19
EVENT VIDEO PLAYBACK .................................................................................. 20
ADVANCED SETTINGS ........................................................................................ 23
TROUBLE SHOOTING .......................................................................................... 27
STORAGE MEDIA MANAGEMENT...................................................................... 27

2
OVERVIEW
Theoutdoor camera which is equipped with powerful LEDlightilluminates. Thelight can be
switched on manually in the app or set to switch on when motion isdetected. You can also control
the camera via the app remotely from anywhere.
* 1Mbps (upload/
download speed) is suggested.
the smart-mobiledevice(s) needto beon Wi-Fi or 4G mobile network
in order to receive maximum download speed.
*When the internet transmission islow, the app will automatically switch to Relay
Mode:
• By adjusting to “Better Streaming” in the system setting section may improve
the APP performance.
* Yourinternet bandwidth islimited.
connecting tothe camera simultaneously.
* 1.5GHz dual
core processor or equivalent is suggested.
*If the signal strength of your Wi-Fi router isweak, there are several ways to improve
transmission:
•Change router/camera relative position to receive better signal.
•Use wire Ethernet cable on the camera to establish connection between the
camera and your router.
• Use Wi-Fi repeater/extender to maximize the service range of your Wi-Fi route.
• Switch your router to 11b/11g mode in order to improve router service range.
*Please make sure the memory card used is CLASS10 rated.

3
IMPORTANT SAFETY PRECAUTIONS
Damages caused by non-compliance with this operating manual will void the warranty! We will
not assume any liability for damages to items or persons caused by improper handling or non-
compliance with the safety notices! Any warranty claim will be null and void in such cases.
voided.
3. Never tug on the power cords.
4. Do not expose the camera to high temperature or leave it in direct sunlight. Doing so may
damage the camera or cause camera temporary malfunction.
5. Use the devices with care. Avoid pressing hard on the camera body.
is a storm or
lightning.
7. Remove the power during long periods between usages.
8. Use only the accessories and power adapters supplied by the manufacturer.
the reach of
infants.
devices are
in operation.
PLEASE READ BEFORE YOUSTART
perceived policy.
of video recording/surveillance.
WIRELESS DEVICES OPERATING RANGE
reception
distance between the
performance. Wireless
CCTV operating on a secure
interference from product such
KG
KG
KG

4
KIT CONTENT
Forbest system performance:
iOS: iPhone6 / iPad2 / Mini iPad with iOS 10.0 or above.
Android: 1.5G dual core processor dual core procesor with 1G RAM or above.
Storage: Class 10 memory card.
Bandwidth: 1Mbps or above upload/download speed suggested.
Tools Required: (not included)
•Electric drill
•5mm masonry drill bit
•15mm masonry drill bit
•No. 2 Philips screwdriver
•
x 1
Hex Key
x 1
Quick Start Guide
x 1
Positioning CardScrew Pack
x 1
Wall mount bracket
x 1
UP
WAPP-LSE
x 1
Antenna
x 1
x 1
Reset Pin

5
SAFETY AND INSTALLATION TIPS
use of cable/pipe detector is advisable.
video/power extension cables from being exposed externally and to prevent/reduce the chances of
the hole is sealed up around the cable using a sealant to prevent drafts.
branches or moving objects that might unnecessarily cause the camera to record.

6
PRODUCT OVERVIEW
Note:
to factory default and you may set up the camera again.
Power LED Indicator
Link LED Indicator
Reset Button
Speaker
RESETU SB
Memory Card
Slot
FHD Camera
LED Light
Antenna
Motion Sensor
Light Sensor
Wall Mount Bracket
Microphone
Micro USB Port for
“only” Wi-Fi Se tup

7
INSTALL YOUR DEVICE
ETHERNET CONNECTION (OPTIONAL)
For optimal performance install the lighting camera at a hight between 2.5 and 4 meters.
Disconnect power at fuse or circuit breaker before proceeding to the installtion.
Motion Detection 90˚
2.5m Height
I/O Pin Connector
RX+/RX-/TX+/TX-: Ethernet Cable I/O*
*Ethernet cable not included in the
package.
1
2
3
6
UP
1
2
3
6
UP

8
Put the terminal blocks back into the base properly to protect it against water.
CAMERA SETUP INSTRUCTION
off
A B
2
OK
UP

9
UP
UP
3
56
4
Connect to here

10
7
9 10
11
on
8
when you done.
Wait for 1 minute for camera to connet to internet.
adjust the brightness to prefer level once the camera has setup completed.
have better
waterproof protection.

1. Power on the Guardian
2. Connect your smartphone with the Wi-Fi signal (SSID) of the camera. It always starts with HD
- ****
and corresponds with the QR-code number on the Guardian. The default password is 12345678
3. Open the Smartwares view app and press the + button in the bottom.
4. You need to in fill 3 fields:
A: System name Free to name your camera in any way you want
B: DID Press Search and the DID will show. Other option is to Scan the QR-code
on the Guardian or type it manually.
C: Password The default password is 123456
Press Save when you entered all details.
11
GUARDIAN APP SETUP

5. You can now open the live view of the camera, by pressing below Icon.
You are now directly being forced to change the default password to your own password:
6. To connect the Guardian to your own Wi-Fi network, press the ‘gear wheel’ icon twice
12

Press ‘Advanced’ in this screen:
7. The advanced setting are protected by an Admin password. Insert the Admin password, which
is default: 123456
You are now directly being forced to change the default admin password to your own admin password:
13

8. When you have accessed the advanced settings, go to WiFi setting and press Manage WiFi network:
9. Choose the Wi-Fi network name (SSID) where you want to connect to and insert the password.
10. The Guardian will restart and after approx. 1 minute your camera is restarted. Now the setup is done.
14

15
Smartwares View app overview
Start screen
The start screen offers you an overview of your Smartwares camera and other compatible
Smartwares products you may have installed. From this screen you have access to different
functions:
• List of all registered cameras. You can
quickly access your camera of choice in
the list, even when multiple cameras are
registered, by scrolling the list up or down.
• Tap the screenshot to enter a live view of
your camera.
• The connection status (connected or
disconnected) is indicated for each camera
in the list.
Add a camera (or other compatible Smartwares product).
Settings: View your camera information, access advanced settings, remove a camera from
the appand view your recordingsfrom the event list.
Refresh : Refresh the connections of all the cameras in the list.
Information : Access camera/app firmware version information, manage some settings,
and set up a PIN lock for the app.
Note: The screenshots in this manual may look slightly different from the app you are using.
This is because there are different versions of the app for iOS and Android, and because
the app is updated regularly.

Adding a camera
Tap to add a cameraor other compatible Smartwares product.
Advanced Settings
Tap . The additional setup selection icons will appear. Now tap to access the
advanced settings. Tap again to exit.
Device settings: Change the device name, reset the Wi-Fi settings and access the
advanced settings section.
Delete the device : Remove the device from your app.
Event list: View and play back the list of events for the selected camera
16

Setup PIN Lock
If you choose to enable the PIN lock function, you are required to enter the PIN code every time
when launching the app.
1. Select "Enable lock when starting" and enter your PIN code.
2. Confirm the PIN codeentered.
(iOS) (Android)
Notifications
For iOS
If you want to enable/disable notifications, please follow the steps below:
1. Launch Settings from your Home screen.
2. Tap “ Notifications”.
3. Scroll down to find the Smartwares View app and tap on it.
4. Adjust the notification settings, such as On/Off, Sounds, banners, etc.
Note:
If you forget the PIN code, please delete and reinstall the app.
Note:
It takes time for the changes to take effect in iOS.
17

For Android
If you want to enable/disable notifications, please follow the steps below.
Video hardware acceleration
Turn video hardware acceleration on for faster performance. Please turn this off if you experience
any graphical glitches.
About app/API version info
Tap “about” to check the app version.
(iOS) (Android)
Note:
The internet connection and wireless network speed may influence the performance of the
push notification service.
18

Live view page
Light button
Tap to switch between: ON / OFF / AUTO
Auto mode: The light will turn on when motion is detected and
only when it is dark. The light will stay on for 1 minute after
motion detection.
Snapshot Tap to take a snapshot. Snapshots are saved to your mobile
device.
Mute Tap once to mute the audio coming from the camera. Tap
again to resume.
RecordTap to start a recording. The recorded files are stored in the
MicroSD card inside the camera.
Microphone on/off Tap once to turn on the microphone, tap again to mute.
Alarm function
You can manually turn on/off the siren in the Guardian
19