SMC Networks WiShare SMCWTVA100 User manual

USER GUIDE
WiShare
Wireless TV Adapter
SMCWTVA100

No. 1, Creation Road III,
Hsinchu Science Park,
30077, Taiwan, R.O.C.
TEL: [phone]
Fax: [phone]
Wireless TV Adapter
User Guide
July 2013
E072013-KS-R02

Information furnished by SMC Networks, Inc. (SMC) is believed to be accurate and reliable.
However, no responsibility is assumed by SMC for its use, nor for any infringements of patents or
other rights of third parties which may result from its use. No license is granted by implication or
otherwise under any patent or patent rights of SMC. SMC reserves the right to change specifications
at any time without notice.
Copyright © 2013 by
SMC Networks, Inc.
No. 1 Creation Road III,
Hsinchu Science Park,
30077, Taiwan, R.O.C.
All rights reserved
Trademar ks:
SMC is a registered trademark; and Barricade, EZ Switch, TigerStack, TigerSwitch, and TigerAccess
are trademarks of SMC Networks, Inc. Other product and company names are trademarks or
registered trademarks of their respective holders.

– 4 –
WARRANTY AND PRODUCT REGISTRATION
To register SMC products and to review the detailed warranty statement,
please refer to the Support Section of the SMC Website at http://
www.smc.com.

– 5 –
COMPLIANCES
FEDERAL COMMUNICATION COMMISSION INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
◆Reorient or relocate the receiving antenna
◆Increase the separation between the equipment and receiver
◆Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected
◆Consult the dealer or an experienced radio/TV technician for help
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to operate
this equipment.
N OTE : The manufacturer is not responsible for any radio or TV interference
caused by unauthorized modifications to this equipment. Such
modifications could void the user’s authority to operate the equipment.
CE MARK DECLARATION OF CONFORMANCE FOR EMI AND SAFETY (EEC)
Declaration of Conformity (DoC) can be obtained from
www.smc.com
-> support -> download -> declarations & certifications

– 6 –
This information technology equipment complies with the requirements of
the Council Directive 89/336/EEC on the Approximation of the laws of the
Member States relating to Electromagnetic Compatibility and 73/23/EEC
for electrical equipment used within certain voltage limits and the
Amendment Directive 93/68/EEC. For the evaluation of the compliance
with these Directives, the following standards were applied:
◆Health (Article 3.1(a) of the R&TTE Directive)
■RF exposure related standards use ERC REC 519/EC
◆Safety (Article 3.1(a) of the R&TTE Directive)
■LVD: EN60950-1:2006+A11:2009+A1:2010
◆Electromagnetic compatibility (Article 3.1 (b) of the R&TTE Directive)
■EN 301 489-1 V.1.8.1
■EN 301-489-17 V2.1.1
◆Radio frequency spectrum usage (Article 3.2 of the R&TTE Directive)
■EN 300 328 V1.7.1
■EN 301 893 V1.6.1

– 7 –
ABOUT THIS GUIDE
PURPOSE This guide details the hardware features of the wireless TV adapter,
including its physical and performance-related characteristics, and how to
install the device and use its configuration software.
AUDIENCE This guide is for Smart Phone and PC users with a working knowledge of
computers. You should be familiar with Windows and Android operating
system concepts.
CONVENTIONS The following conventions are used throughout this guide to show
information:
N OTE : Emphasizes important information or calls your attention to related
features or instructions.
C AUTION : Alerts you to a potential hazard that could cause loss of data, or
damage the system or equipment.
W ARNING : Alerts you to a potential hazard that could cause personal injury.
RELATED PUBLICATIONS The following publication gives basic information on how to install and use
the wireless TV adapter.
Quick Installation Guide
Also, as part of the wireless TV adapter’s software, there is online help that
describes all configuration related features.
REVISION HISTORY This section summarizes the changes in each revision of this guide.
JULY 2013 REVISION
Adds new features released for the second firmware version.
OCTOBER 2012 REVISION
This is the first revision of this guide.

– 8 –
CONTENTS
WARRANTY AND PRODUCT REGISTRATION 4
COMPLIANCES 5
ABOUT THIS GUIDE 7
CONTENTS 8
FIGURES 11
TABLES 14
1I
NTRODUCTION 15
Overview of the Wireless TV Adapter 15
Main Features 15
Package Contents 16
Key Hardware Features 16
2SYSTEM REQUIREMENTS AND CONNECTIONS 18
System Requirements for PC to TV Mode 18
System Requirements for Mirror PBC and PIN Mode (Miracast) 18
System Requirements for Media Share Mode (DLNA) 19
3INSTALLATION GUIDE 20
How to Connect the TV Adapter 20
Install Screencasting Software 21
Connect a Device to the SMCWTVA100 21
Non-Bridged Connection Setups 26
Wired Connection Setup 26
Wireless Connection Setup 27
Hardware Reset to Factory Default Settings 27
4SOFTWARE INSTALLATION 29
PC to TV and AirFun Installation (Windows) 29
iMediaShare App Installation (Android) 39
iMediaShare App Installation (iOS) 42

C ONTENTS
– 9 –
5OPERATION MODES 45
PC to TV Mode 45
Using PC to TV (Windows PC Users) 45
Additional PC to TV Controller Menu Items 47
Mirror PIN and PBC Mode 48
Mirror PBC Versus PIN Mode 48
Setup Mirror PBC or PIN From an Android Device 49
Media Share Mode (DLNA Mode) 53
Using AirFun
(Windows PC Users) 53
Using iMediaShare (Android Users) 58
Using iMediaShare (iOS Users) 60
NAS (USB) Mode 63
Using NAS Mode 63
Additional Controls In NAS (USB) Mode 64
Firmware Upgrade 64
Remote Options 65
Setup Using the OSD Menu 67
Network 68
Audio 69
Video 69
System 70
6WEB CONFIGURATION 71
Network Topology and Settings 71
Quick Setting 71
Network Settings 71
Wireless Configuration 72
Basic Settings 72
Security Settings 73
Band Settings 73
Virtual AP Bridge 74
Display Output Setting 75
Display Setting 75
Web UI Password 75
Password Setting 75
Mode Setting 76

C ONTENTS
– 10 –
Mode Switch 76
Additional Functions 77
Status 77
Configuration 77
Remote 78
Restart 78
Reset to Factory Default Configuration 78
7SPECIFICATIONS 79

– 11 –
FIGURES
Figure 1: Rear View 16
Figure 2: Side View 17
Figure 3: Connecting to the SMCWTVA100 using a PC 22
Figure 4: Enter the URL of the SMCWTVA100 22
Figure 5: Web UI Login 23
Figure 6: Quick Setting 23
Figure 7: Stand-Alone Connection Setup 24
Figure 8: Bridge to Wireless Connection Setup 25
Figure 9: Bridge to Ethernet (Wired) Connection Setup 26
Figure 10: “Wired” Connection Setup 27
Figure 11: Wireless Connection Setup 27
Figure 12: Setup Wizard Start 29
Figure 13: Google Play Store 39
Figure 14: Search DLNA Software App - Android Users 39
Figure 15: Install iMediaShare App - Android Users 40
Figure 16: Download iMediaShare App - Android Users 40
Figure 17: iMediaShare App is Installed - Android Users 41
Figure 18: Launch iMediaShare App - Android Users 41
Figure 19: App Store 42
Figure 20: Search DLNA Software App - iOS Users 42
Figure 21: Install iMediaShare App - iOS Users 43
Figure 22: iMediaShare App Install Complete - iOS Users 43
Figure 23: Activate iMediaShare App - iOS Users 44
Figure 24: PC to TV Mode Screen 46
Figure 25: PC to TV Icon 46
Figure 26: PC to TV Server Selection and Login Window 46
Figure 27: PC to TV Controller 47
Figure 28: Mirror Mode—SMCWTVA100 in Mirror PBC and PIN Mode. 49
Figure 29: Mirror Mode—Accessing Miracast Within Android 49
Figure 30: Mirror Mode—Launching Miracast. 50
Figure 31: Mirror Mode—Selecting the SMCWTVA100 50

C ONTENTS
– 12 –
Figure 32: Mirror Mode—Connecting 51
Figure 33: Mirror Mode—Connected 52
Figure 34: Media Share Mode 53
Figure 35: Connect to SMCWTVA100 53
Figure 36: Launch AirFun 54
Figure 37: Search and Connect to Device 54
Figure 38: AirFun Activate 54
Figure 39: Select Photos 55
Figure 40: View Photo 55
Figure 41: Select Audio File 56
Figure 42: Play Audio File 56
Figure 43: Select Video File 57
Figure 44: Play Video 57
Figure 45: Connect to SMCWTVA100 58
Figure 46: Launch iMediaShare 58
Figure 47: Select the Desired File Type 59
Figure 48: Select a Photo 59
Figure 49: Photo Ready for Display 60
Figure 50: Connect to SMCWTVA100 60
Figure 51: Launch iMediaShare 61
Figure 52: Select the Desired File Type 61
Figure 53: Select a Photo 62
Figure 54: Photo Ready for Display 62
Figure 55: USB Mode 63
Figure 56: Remote Functions for NAS (USB) Mode 64
Figure 57: Upgrade Firmware 65
Figure 58: Upgrade Firmware Completed 65
Figure 59: Remote Control 66
Figure 60: Download AirFun Page 67
Figure 61: Wireless LAN Setup 67
Figure 62: Setup Main Page 68
Figure 63: Network Settings 72
Figure 64: Wireless Settings - Basic Setting 73
Figure 65: Wireless Settings-Security Settings 73
Figure 66: Wireless Settings-Band Settings 74
Figure 67: Virtual AP Bridge 74

C ONTENTS
– 13 –
Figure 68: Display Settings 75
Figure 69: Password Setting 76
Figure 70: Mode Switch 76
Figure 71: Status Menu 77
Figure 72: Configuration Menu Item 77
Figure 73: Remote Menu Item 78
Figure 74: Restart Confirmation Dialog Box 78

– 14 –
TABLES
Table 1: System Requirements (PC to TV Mode) 18
Table 2: Current Miracast Devices Supported 18
Table 3: System Requirements (Media Share Mode) 19
Table 4: Remote Option Button Menus 66

– 15 –
1INTRODUCTION
This chapter includes these sections:
◆Overview of the Wireless TV Adapter
◆Package Contents
◆Key Hardware Features
OVERVIEW OF THE WIRELESS TV ADAPTER
Enjoy all of your personal and online content on a big screen with a simple
wireless connection. The SMCWTVA100 can use PC to TV, Media Share
(DLNA or Digital Living Network Alliance), Miracast and USB drive transfer
technology to share your mobile device or laptop content through a Wi-Fi
link to your TV or room projector. You can sit back on a couch and enjoy
your favorite movies, videos, photos, online shows and more, all in full HD.
You can also make business presentations or play music, photos or video
directly from your smartphone or tablet by Wi-Fi. The SMCWTVA100 can be
used with Windows, Android, and Apple iOS systems to share your
happiness.
MAIN FEATURES ◆PC to TV—All PC video and audio output is “screencast” and displayed
on your TV.
◆Miracast—Android smartphone screen and sound is “screencast” and
displayed on your TV.
◆MediaShare—DLNA technology displays selected video, image, and
sound files from PCs, tablets, and smartphones onto your TV.
◆USB interface—USB thumb or disk drive media files are displayed on
your TV.
◆Dual-band Wi-Fi connectivity (2.4G or 5G Band 2T2R 300 Mbps)
◆HDMI/CVBS support—To support both new and previous generation
televisions, monitors, and projectors.
◆Micro-USB DC in port—Any convenient USB power source can be
used.
◆Web UI—Web UI (User Interface) with firmware upgrade capability.

C HAPTER 1 | Introduction
Package Contents
– 16 –
PACKAGE CONTENTS
The packaging should contain the following items:
◆SMCWTVA100
◆HDMI cable
◆AV Cable
◆Power adapter
◆Quick Installation Guide
◆Resource CD, including this User Guide and AirFun Software
N OTE : Make sure that the package contains the above items. If any of the
listed items are damaged or missing, please contact your distributor.
KEY HARDWARE FEATURES
Figure 1: Rear View
The following items are located on the rear panel (from left to right).
1. AV
This CVBS port connects the TV adapter output signal to a TV or projector.
2. HDMI
This port connects the TV adapter output signal to a TV or projector.
12 345

C HAPTER 1 | Introduction
Key Hardware Features
– 17 –
3. ETHERNET LAN PORT
This port connects the TV adapter to a LAN over Ethernet. For example,
you can connect it to a spare port on your home WI-FI router.
4. POWER BUTTON
When the DC power adapter is attached and connected to a power source,
the power button must be depressed to power on the unit.
5. DC 5V
The micro-USB power socket is where you connect the power adapter. Use
the power adapter provided with the TV adapter or any suitable device
which can supply DC voltage over a USB connection.
Figure 2: Side View
The following items are located on the side panel (from left to right).
6. USB PORT
This port is for upgrading firmware only. Connect an external USB storage
device, such as a thumb drive, to this port.
7. MODE BUTTON
Press the button to switch between PC to TV, Miracast PBC/PIN,
MediaShare, and USB modes.
67

– 18 –
2SYSTEM REQUIREMENTS AND
CONNECTIONS
This chapter includes these sections:
◆System Requirements for PC to TV Mode
◆System Requirements for Mirror PBC and PIN Mode (Miracast)
◆System Requirements for Media Share Mode (DLNA)
SYSTEM REQUIREMENTS FOR PC TO TV MODE
PC to TV software uses a proprietary protocol similar to Wi-Di however,
instead of being limited to the few models that support Wi-Di, you can use
it on any Windows 7 or Windows 8 OS computer.
Table 1: System Requirements (PC to TV Mode)
SYSTEM REQUIREMENTS FOR MIRROR PBC AND PIN MODE (MIRACAST)
Mirror PBC and PIN mode is supported by a limited number of Android 4.2
release devices. Please check the SMC website for a list of currently
supported devices or check with your device’s manufacturer. Currently the
following devices are known to function correctly with the SMCWTVA100
using Mirror mode:
Table 2: Current Miracast Devices Supported
System Component Requirement
PC or Laptop CPU: 1.6 GHz or better
Memory: 1.0 GB or better
Network: 802.11g/n Wi-Fi and/or 100/1000 Mbps Ethernet
Manufacturer Model
Samsung S2, S4, Note2, Note8
LG Optimus G, LG-E975
Sony Xperia Z, Xperia TX
Google Nexus 4
Sharp SH-10D
HTC New HTC one
Xiaomi 2S

C HAPTER 2 | System Requirements and Connections
System Requirements for Media Share Mode (DLNA)
– 19 –
N OTE : Android 4.2 or higher smartphones and tablets with Miracast support
for Wi-Fi Direct Transfer.
SYSTEM REQUIREMENTS FOR MEDIA SHARE MODE (DLNA)
The SMCWTVA100 is designed to be a DLNA-DMR (digital media renderer)
device, which means you are able to stream video, music, and photo
content from a PC (Windows 7 or Windows 8 OS), smartphone, or tablet-
PC to your TV.
Table 3: System Requirements (Media Share Mode)
System Component Requirement
PC or Laptop CPU: 1.6 GHz or better
Memory: 1.0 GB or better
Network: 802.11g/n Wi-Fi and/or 100/1000 Mbps Ethernet
Smartphone CPU: 800 MHz or better
Memory: 256 MB or better
Network: 802.11g/n Wi-Fi or better
Tablet CPU: 600 MHz or better
Memory: 256 MB or better
Network: 802.11g/n Wi-Fi or better

– 20 –
3INSTALLATION GUIDE
The sections that follow describe the hardware and software installation
procedures and some additional configuration required to connect your
SMCWTVA100 into your existing LAN or WLAN. The following sections are
included:
◆How to Connect the TV Adapter
◆Install Screencasting Software
◆Connect a Device to the SMCWTVA100
◆Non-Bridged Connection Setups
HOW TO CONNECT THE TV ADAPTER
For a basic “stand-alone” hardware install of the TV adapter, perform the
following steps:
N OTE : If Internet is required for your display function, before installing the
TV adapter, make sure your PC, smartphone or tablet-PC is successfully
connected to the Internet through a broadband service. If there are any
problems, first contact your ISP to resolve them.
1. Plug in the power cord.
2. Connect the HDMI cable to the HDMI output of the SMCWTVA100 and
to the HDMI input of your TV, projector or monitor.
3. To turn on the SMCWTVA100, push in the power button until it clicks in
the depressed position.
4. Follow the on-screen instructions to set up the SMCWTVA100. The
system default mode is PC to TV mode, which means it is ready to
display any media from your PC including presentations, video, music,
and photos.
5. You can switch between five modes by pushing the mode button on the
side of the unit (next to the USB port) two or three times. The on-
screen instructions will prompt you to push the button again after the
first or second push.