SMC Networks EZ Connect USB 2.0 7-Port Hub MCUSBH7 User manual

Hardware Installation
Using The EZ 3Click Wizard
SMCUSBH7
EZ Installation CD
EZ Installation CD
Wireless Networking
Initial Configuration
Using the USB Hub Stand
Safety
Specification
Features
EZ Connect™
USB 2.0 7-Port Hub
EZ Connect™
USB 2.0 7-Port Hub
EZ Connect™
USB 2.0 7-Port Hub
EZ Connect™
USB 2.0 7-Port Hub
EZ Connect™
USB 2.0 7-Port Hub
Quick Installation Guide/User's ManualQuick Installation Guide/User's ManualQuick Installation Guide/User's ManualQuick Installation Guide/User's ManualQuick Installation Guide/User's Manual
Hardware Installation
Using The EZ 3Click Wizard
SMCUSBH7SMCUSBH7
SMCUSBH7
SMCUSBH7
EZ Installation CD
EZ Installation CD
Wireless Networking
Initial Configuration
Using the USB Hub Stand
Safety
Specification
Features
EZ Connect™
USB 2.0 7-Port Hub
Quick Installation Guide/User's Manual
From U.S.A. and Canada (24 hours a
day, 7 days a week)
(800) SMC-4-YOU
Phn: [phone]
Fax: [phone]
From Europe : Contact details can be
found on www.smc.com
INTERNET
E-mail addresses:
[email protected]om
Driver updates:
http://www.smc.com/index.cfm?action=
techsupport
If you are looking for further contact
information,
please visit www.smc.com
38 Tesla
Irvine, CA 92618
Phone: [phone]
Model Number:
SMCUSBH7
Hardware Installation
Using The EZ 3Click Wizard
SMCUSBH7
EZ Installation CD
EZ Installation CD
Wireless Networking
Initial Configuration
Using the USB Hub Stand
SafetySafety
Specification
Features
EZ Connect™
USB 2.0 7-Port Hub
Quick Installation Guide/User's Manual
Always read the safety instructions carefully
• Keep this user's manual for future reference
• Keep this equipment away from humidity
• Lay this equipment on a reliable flat surface before setting it up
• If any of the following situation arises, have the equipment checked by
a service technician:
• The equipment has been exposed to moisture
• The equipment has been dropped and damaged
• The equipment has obvious sign of breakage
• The equipment has not working well or you cannot get it work
according to this user's manual.
1. Compliant with both Universal Serial Bus Specification Revision 2.0
(Data Rate 1.5/ 12/ 480 Mbps) and Revision 1.1 specification.
2. Bus-power and self-power mode used.
3. Includes 1 upstream and 7 downstream USB ports.
4. 1 LED indicator for power-on LED.
5. 7 LED indicators for downstream port status.
6. Plug and play.
7. Over-current detection and protection.
8. Connects up to 127 USB devices.
9. OS driver support: Win98SE/Win ME /Win 2000/Win XP & Mac 10.1 and up.
10. Plug and play.
Supported O.S.
Functions USB 2.0 7-Port HUB
O.S. USB 1.1 USB 2.0
Win 98se Built in OS Follow USB 2.0 system driver
Win ME Built in OS Follow USB 2.0 system driver
Win 2000 Built in OS Follow USB 2.0 system driver
Win XP Built in OS Follow USB 2.0 system driver
Mac Built in OS Follow USB 2.0 system driver
NOTE:
1. If you connect USB 2.0 devices from this hub to a PC or Mac OS that does
not support USB 2.0, please install USB 2.0 drivers provided by the USB 2.0
device manufacturer
2.This hub doesn't support Hi-Power device at bus power mode, please add
an adapter as necessary.
Hardware Installation
Using The EZ 3Click Wizard
SMCUSBH7
EZ Installation CD
EZ Installation CD
Wireless Networking
Initial Configuration
Using the USB Hub Stand
Safety
Specification
FeaturesFeatures
EZ Connect™
USB 2.0 7-Port Hub
Quick Installation Guide/User's Manual
Hardware Installation
Using The EZ 3Click Wizard
SMCUSBH7
EZ Installation CD
EZ Installation CD
Wireless Networking
Initial Configuration
Using the USB Hub Stand
Safety
SpecificationSpecification
Features
EZ Connect™
USB 2.0 7-Port Hub
Quick Installation Guide/User's Manual
Ports
Seven downstream port and one
upstream port
Compliance
FCC regulations for home or
office use CE emissions
Power
Self Power: 5V 4.0A
Adapter: Input: 100~240v 50Hz-60Hz
Output: 5V 4.0A
Dimensions
3.94” (L) x 2.36” (W) x .95” (H)
10cm (L) x 6cm (W) x 2.5cm (H)
Weight
3.81oz /108g
Storage Temperature
-10~80 C
Working Temperature
0~40 C
Information furnished by SMC Networks, Inc. (SMC) is believed to be accurate and reli-
able. However, no responsibility is assumed by SMC for its use, nor for any infringements
of patents or other rights of third parties, which may result from its use. No license is
granted by implication or otherwise under any patent or patent rights of SMC. SMC
reserves the right to change specifications at any time
without notice.
SMC Networks, Inc.
38 Tesla
Irvine, CA 92618
Copyright © SMC Networks, Inc., 2003.
All rights reserved.
SMC is a registered trademark; and EZ ConnectTM is a trademark of SMC Networks.
Other product and company names are trademarks or registered trademarks of their
respective holders.

Hardware Installation
Using The EZ 3Click Wizard
SMCUSBH7
EZ Installation CD
EZ Installation CD
Wireless Networking
Initial Configuration
Using the USB Hub Stand
Safety
Specification
Features
EZ Connect™
USB 2.0 7-Port Hub
Quick Installation Guide/User's Manual
Thank your for purchasing SMCUSBH7 EZ ConnectTM USB 2.0 7-Port Hub.
SMCUSBH7 is a plug and play full featured external Universal Serial Bus
Hub. It allows your computer to connect to other USB interfaces such as joy-
sticks, modem, digital speakers, printers, digital cameras, monitors, key-
boards, mouse, storage devices, and many other USB devices. Moreover, this
unique hub is designed for space-saving functions.
1. Plug the included AC power adapter into the power jack at the rear of the
USB 7 port hub and an electrical outlet.
2.Connect to computer by using included USB cable. Connect A type
connector to the computer and connect B type to the USB hub's upstream
port (B type connection)
3.Connects USB devices or hubs to the 7 port hub's downstream 1 ~ 7 ports
(A type).
You can place the SMCUSBH7 either vertically or horizontally with the stand
which is provided. You can also fasten it to a surface using screws (screws
not provided). Additionally, the SMCUSBH7 hubs can be stacked together.
A. Vertically
Push the USB Hub from A all the way down
until you meet the stopper. (Refer to Figure 1)
Push the USB Hub all the way in until you hear
a click. There is a track on both the top and
the bottom so you can put it either way
depending on your needs. (Refer to Figure 2)
B. Horizontally
Have the hole of the stand facing up and push
the clipper to the hole of the hub between the
stand-off. Make sure you here a click. You
could push the stand in from the left or the
right. (Refer to Figure 3)
C. Fastening to a surface
Secure the stand to the desk and fasten the
screws on both side of the stand. (Package
does not include screws for fastening the hub
to a surface)
Slide the USB Hub into the stand, the same
way as the vertically and horizontally placed
hubs. (Refer to Figure 4)
D. Stacking
USB 7-port hubs also can be stacked together.
Slide the hubs in a stack. Face them in a same
direction. (Refer to Figure 5)
Slide the hubs inward until you hear a click.
Do not stack hubs in opposite directions.
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
Power LED (Red) Status LED (Green
Upstream Port
(B type connector)
Downstream Ports
(A type connector)
Power Jack