SMC Sierra Monitor FieldServer FS-8704-23 Release note

Driver Version: 1.01
Document Revision: 2.B
FieldServer
FS-8704-23 EnergyWise Endpoint
Driver Manual
(Supplement to the FieldServer Instruction Manual)
APPLICABILITY & EFFECTIVITY
Effective for all systems manufactured after December 2017.

EnergyWise Endpoint Driver Manual
Contact Information
Technical Support
Please call us for any technical support needs related to the FieldServer product.
Sierra Monitor Corporation
1991 Tarob Court
Milpitas, CA 95035
Website: www.sierramonitor.com
U.S. Support Information:
[phone]
[phone]
Email: [e-mail]
EMEA Support Information:
[phone]
Email: [e-mail]

EnergyWise Endpoint Driver Manual
Table of Contents
TABLE OF CONTENTS
1EnergyWise Endpoint Description.....................................................................................................4
2Driver Scope of Supply .......................................................................................................................4
2.1 Supplied by Sierra Monitor Corporation .........................................................................................4
2.2 Provided by the Supplier of 3rd Party Equipment............................................................................4
2.2.1 Required 3rd Party Hardware...................................................................................................4
2.2.2 Required 3rd Party Configuration.............................................................................................4
3Hardware Connections........................................................................................................................5
4Data Array Parameters........................................................................................................................6
5Configuring the FieldServer as a EnergyWise Endpoint Client......................................................7
6Configuring the FieldServer as a EnergyWise Endpoint Server.....................................................8
6.1 Server Side Connection Parameters..............................................................................................8
6.2 Server Side Node Parameters........................................................................................................8
6.3 Server Side Map Descriptor Parameters........................................................................................9
6.3.1 FieldServer Specific Map Descriptor Parameters...................................................................9
6.3.2 Driver Specific Map Descriptor Parameters............................................................................9
6.3.3 Map Descriptor Example.......................................................................................................10
Appendix A Reference..............................................................................................................................11
Appendix A.1 EnergyWise Endpoint Setup on Cisco Router..................................................................11
Appendix A.2 Data Manipulation using Queries and Filters....................................................................11
Appendix A.2.1 Query types Supported by EnergyWise.....................................................................11
Appendix A.2.2 Filtering the results.....................................................................................................11
Appendix A.3 Unsupported Functions.....................................................................................................11

EnergyWise Endpoint Driver Manual
Page 4 of 11
1 ENERGYWISE ENDPOINT DESCRIPTION
The EnergyWise Endpoint driver allows the FieldServer to participate on an EnergyWise domain as a
Parent Node with multiple Child Nodes. The FieldServer gateway acts as a Parent node on the
EnergyWise domain and a number of Child Nodes can be configured to read third party server devices
such as Power Meters on Modbus or HVAC controllers on LonWorks.
Max Nodes Supported
FieldServer Mode
Nodes
Comments
Server
One Parent Node
Only a single Parent Node is supported
Multiple Child Nodes
The number of Child Nodes is limited to the maximum
points that the FieldServer con be configured for.
2 DRIVER SCOPE OF SUPPLY
2.1 Supplied by Sierra Monitor Corporation
PART #
Description
FS-8915-10
UTP cable (7 foot) for Ethernet connection
2.2 Provided by the Supplier of 3rd Party Equipment
2.2.1 Required 3rd Party Hardware
Part #
Description
EnergyWise capable switch or Router (e.g. Catalyst 2960 switch)
2.2.2 Required 3rd Party Configuration
EnergyWise Management tool e.g. JouleX Energy Management system, or directly on an EnergyWise
router using the Cisco CLI.

EnergyWise Endpoint Driver Manual
Page 5 of 11
3 HARDWARE CONNECTIONS
The FieldServer is connected to an EnergyWise capable switch as shown in the connection drawing.
Configure the EnergyWise switch according to the manufacturer’s instructions. Typically, this will involve
enabling the EnergyWise domain and specifying a Shared Secret code. Refer to Appendix A.1 for a
typical CLI session on a Cisco EnergyWise switch.
FieldServer
FieldServer Part #
8915-10
UTP cable
Connect to an Ethernet Port
on the FieldServer
N1
19
Cisco Device

EnergyWise Endpoint Driver Manual
Page 6 of 11
4 DATA ARRAY PARAMETERS
Data Arrays are “protocol neutral” data buffers for storage of data to be passed between protocols. It is
necessary to declare the data format of each of the Data Arrays to facilitate correct storage of the relevant
data.
Section Title
Data_Arrays
Column Title
Function
Legal Values
Data_Array_Name
Provide name for Data Array.
Up to 15
alphanumeric
characters
Data_Array_Format
Provide data format. Each Data Array can only take on
one format.
FLOAT, BIT, UInt16,
SInt16, Byte.
Data_Array_Length
Number of Data Objects. Must be larger than the data
storage area required by the Map Descriptors for the data
being placed in this array.
1-10, 000
Example
// Data Arrays
Data_Arrays
Data_Array_Name
, Data_Array_Format
, Data_Array_Length
DA_Usage_01
, UInt16
, 200
DA_Level_01
, Byte
, 200

EnergyWise Endpoint Driver Manual
Page 7 of 11
5 CONFIGURING THE FIELDSERVER AS A ENERGYWISE ENDPOINT CLIENT
Client Configuration is not applicable for the EnergyWise Endpoint Driver. Refer to FS-8704-24
EnergyWise Management API Driver for Client operation.

EnergyWise Endpoint Driver Manual
Page 8 of 11
6 CONFIGURING THE FIELDSERVER AS A ENERGYWISE ENDPOINT SERVER
For detailed information on FieldServer configuration, refer to the FieldServer Configuration Manual. The
information that follows describes how to expand upon the factory defaults provided in the configuration
files included with the FieldServer (see “.csv” sample files provided with the FieldServer).
This section documents and describes the parameters necessary for configuring the FieldServer to
register and participate in the EnergyWise domain.
The configuration file tells the FieldServer about its interfaces, and the routing of data required. In order to
enable the FieldServer for EnergyWise Endpoint communications, the driver independent FieldServer
buffers need to be declared in the “Data Arrays” section, the FieldServer EnergyWise Parent Node needs
to be declared in the “Server Side Nodes” section, and the data to be provided to the EnergyWise domain
needs to be mapped in the “Server Side Map Descriptors” section. Details on how to do this can be found
below.
NOTE: In the tables below, * indicates an optional parameter and the bold legal values are default.
6.1 Server Side Connection Parameters
Section Title
Adapter
Column Title
Function
Legal Values
Adapter
Adapter Name.
N1, N2
Protocol
Specify protocol used.
EnergyWise_EP
Example
// Server Side Connections
Adapters
Adapter
, Protocol
N1
, EnergyWise_EP
6.2 Server Side Node Parameters
Section Title
Nodes
Column Title
Function
Legal Values
Node_Name
Provide name for the EnergyWise ParentNode.
Up to 32
alphanumeric
characters
Protocol
Specify Protocol used.
EnergyWise_EP
Domain
EnergyWise Domain that this Endpoint will register on.
Any ASCII string –
max 255 characters
Secret
Secret code (password) to gain access to the EnergyWise
Domain. Note, password is case sensitive.
Any ASCII string –
max 255 characters
Parent_Power*
Total Parent consumption of the Parent Node.
Typically 5-10, 6
UDP_Port*
Configurable UDP port number.
Any valid UDP Port,
43440
Discovery_Interval*
Configurable Discovery Interval.
Time in seconds,
30s

EnergyWise Endpoint Driver Manual
Page 9 of 11
Node_Device_Type
Device type connected to the Node.
Node_Role
Role definition for the Node.
Any ASCII string –
max 255 characters
Node_Keywords
Specify one or more keywords which are used to identify
the Node when the EnergyWise query command is
executed. Keywords are a powerful feature of EnergyWise.
EnergyWise managers can tag entities in the domain with
arbitrary keywords and then search –and act on –them
using the keyword.
Space separated
set of keywords
Node_Importance*
Importance Value for Node with 100 the most important
keyword. EnergyWise query results can be executed to
operate on any Node with an importance less than the
specified importance.
1-100
Example
// Server Side Nodes
Nodes
Node_Name
, Protocol
, Domain
, Secret
, UDP_Port
, Discovery_Interval
, Node_Role
FST_Cisco
, EnergyWise_EP
, fst
, pass
, 43440
, 30s
, FSB3510
, Node_Keywords
, Node_Device_Type
, Node_Importance
, Parent_Power
, demo fst gateway
, unknown
, 1
, 6
6.3 Server Side Map Descriptor Parameters
6.3.1 FieldServer Specific Map Descriptor Parameters
Column Title
Function
Legal Values
Map_Descriptor_Name
Name of this Map Descriptor.
Up to 32 alphanumeric characters
Data_Array_Name
Name of Data Array where data is to
be stored in the FieldServer.
One of the Data Array names from
Section 4
Data_Array_Offset
Starting location in Data Array.
0 to (Data_Array_Length-1) as
specified in Section 4
Function
Function of Server Map Descriptor.
Passive
6.3.2 Driver Specific Map Descriptor Parameters
Column Title
Function
Legal Values
Node_Name
Name of Node to fetch data from.
One of the Node Names
specified in Section 6.2
Length*
Length of Map Descriptor.
1
DA_Byte_Name
Byte Name in Data Array where level data will be
written.
DA_Byte_Offset
Offset in Data Array where level data will be written.
MD_Device_Type
Device type Description.
MD_Category*
EnergyWise Category description of the device.
Producer, Consumer,
Meter
MD_Units*
SI Units of power measurement.
Watts, MWatts
MD_Caliber*
Caliber associated with the platform's current power
usage.
Max, Presumed,
Unknown, Actual, Trusted
MD_Role
Role definition for the Map Descriptor.
Any ASCII string –max
255 characters

EnergyWise Endpoint Driver Manual
Page 10 of 11
MD_Importance*
Importance Value for the Device, 100 most important,
1 least important. EnergyWise query results can be
executed to operate on any Node with an importance
less than the specified importance.
1 to 100
MD_Keywords
Importance Value for Node with 100 the most
important keyword. EnergyWise query results can be
executed to operate on any Node with an importance
less than the specified importance.
Space separated set of
keywords.
6.3.3 Map Descriptor Example
// Server Side Map Descriptors
Map_Descriptor_Name
, Data_Array_Name
, Data_Array_Offset
, DA_Byte_Name
, DA_Byte_Offset
Function
Node_Name
MD_Role
Lutron_Lighting_Level
, DA_Usage_01
, 0
, DA_Level_01
, 0
, Passive
, FST_Cisco
, Child
Lutron_Sunscreen
, DA_Usage_01
, 1
, DA_Level_01
, 1
, Passive
, FST_Cisco
, Child
Lutron_Total_Power
, DA_Usage_01
, 2
, DA_Level_01
, 2
, Passive
, FST_Cisco
, Child
Lutron_Max_Power
, DA_Usage_01
, 3
, DA_Level_01
, 3
, Passive
, FST_Cisco
, Child
Circon_VAV
, DA_Usage_01
, 4
, DA_Level_01
, 4
, Passive
, FST_Cisco
, Child
Schneider1_Power_A
, DA_Usage_01
, 5
, DA_Level_01
, 5
, Passive
, FST_Cisco
, Child
Schneider1_Power_B
, DA_Usage_01
, 6
, DA_Level_01
, 6
, Passive
, FST_Cisco
, Child
Schneider1_Power_C
, DA_Usage_01
, 7
, DA_Level_01
, 7
, Passive
, FST_Cisco
, Child
Schneider2_Power_A
, DA_Usage_01
, 8
, DA_Level_01
, 8
, Passive
, FST_Cisco
, Child
Schneider2_Power_B
, DA_Usage_01
, 9
, DA_Level_01
, 9
, Passive
, FST_Cisco
, Child
Schneider2_Power_C
, DA_Usage_01
, 10
, DA_Level_01
, 10
, Passive
, FST_Cisco
, Child
MD_Keywords
MD_Device_Type
MD_Importance
MD_Category
MD_Units
MD_Caliber
Length
, fstlutron
, Unknown
, 10
, 1
, 0
, 1
, 1
, fstlutron
, Unknown
, 20
, 1
, 0
, 1
, 1
, fstlutron
, Unknown
, 30
, 1
, 0
, 1
, 1
, fstlutron
, Unknown
, 40
, 1
, 0
, 1
, 1
, fstlutron
, Unknown
, 50
, 1
, 0
, 1
, 1
, fstschneider1
, Unknown
, 60
, 1
, 0
, 1
, 1
, fstschneider1
, Unknown
, 70
, 1
, 0
, 1
, 1
, fstschneider1
, Unknown
, 80
, 1
, 0
, 1
, 1
, fstschneider2
, Unknown
, 90
, 1
, 0
, 1
, 1
, fstschneider2
, Unknown
, 90
, 1
, 0
, 1
, 1
, fstschneider2
, Unknown
, 90
, 1
, 0
, 1
, 1

EnergyWise Endpoint Driver Manual
Page 11 of 11
APPENDIX A REFERENCE
Appendix A.1 EnergyWise Endpoint Setup on Cisco Router
The commands can be used to set up the domain and secret (using domain = fst and secret = pass) as
per Section 6.2.
•Switch>enable
•Password: <enter password>
•Switch#config terminal
•Switch(config)#energywise domain fst secret pass
•Switch(config)#energywise endpoint security shared-secret pass
•Switch(config)#energywise management security shared-secret pass
•Switch(config)# end
Appendix A.2 Data Manipulation using Queries and Filters
Appendix A.2.1 Query types Supported by EnergyWise
•Collect—Receive power-usage information in Watts from the domain members and end points.
•Save—Save the running configuration of a domain member. Use the energywise allow query to
save global configuration command.
•Set—Change the power level of a domain member or end point in the running configuration.
•Sum—Summarize the information from domain members and end points.
Appendix A.2.2 Filtering the results
You can filter the results with the following attributes:
•Importance—Rate the devices based on the business or deployment context. The range is from 1
(least important) to 100 (most important).
•Role—Device function based on the business or deployment context.
•Name—Device identity.
•Keywords—Device descriptions (other than the name or role).
The query results show entities with importance values less than or equal to the specified value and that
match the different filter attributes specified.
Appendix A.3 Unsupported Functions
Delta command to run "what if "calculations.