CIR66XS smeg 60cm gas cooktop
ID010310
Code CIR66XS
finish satin stainless steel
size 500mmD x 585mmW x 45mmH
installation built-in one-piece hob, suits 60cm cabinet
capacity 31.6mj/hour max over four burners
• 1x ultra-rapid burner (wok) 15 mj/hr
• 2x semi-rapid burner 5.9 mj/hr
• 1x auxiliary burner 4.8 mj/hr
ignition automatic electronic
gas input set for natural gas — regulator supplied
adaptable for ULPG — no regulator
required
safety ame failure device tted to each burner
accessories 2x cast-iron trivets, wok stand, pot rest
options cast-iron griddle plate —
luxury freestanding 46x24cm, code BB3679
warranty two years parts and labour
ULTRA-RAPID TRIPLE BURNER
Conveniently and ergonomically positioned front-left, this
versatile burner, while being designed for perfect wok
cooking, also suits the larger stock pots, saucepans and
griddles.
SIMMER CONTROL
All burners, including the ultra-rapid triple burner can be
adjusted down to a very low, safe flame for the gentlest of
low heat simmers.
AUXILIARY BURNER
Also ideally situated, this small multi-purpose burner is
accessorised with a pot rest to accommodate even the
smallest of utensils such as a coffee percolator or one-cup
espresso maker.
Simply depress and turn the control knob of the desired
cooking zone for flame ignition.
ELECTRONIC IGNITION
The cooktop is connected with a power cord of 1.3 metre
length to be plugged into a GPO located according to
installation needs below the benchline. This supplies a
continuous stored charge to spark the gas supply to the
individual burner of your choice. Simply depress and turn
the control of the desired cooking zone for flame ignition.
LOW MAINTENANCE
The seamless hob design allows for easy wipe-over
cleaning. The control knobs are removable for cleaning
access. Trivets, burner assemblies and wok stand can be
washed in warm soapy water.
INSTALLATION
With only a 30mm displacement into the benchtop, the
cooktop allows for easy installation underbench of either
oven, cupboards or drawers.
FLAME FAILURE
A flame failure device, FFD, with rapid ignition is fitted
to each burner. The FFD ensures that should a flame be
extinguished accidentally — the gas supply to the specific
burner(s) is stopped. For absolute safety, the burner(s) can
only be reignited by physically resetting the control knob(s)
to the OFF position and then following normal ignition
procedure.
optional griddle plates
BB3679
