Smile Line OPTISHADE User manual
#70100-OS - 04/2021
Smile Line SA
Z.I. La Clef, 5
CH-2610 St. Imier
Switzerland
+41 32 944 22 44
www.smileline.ch
SPECIFICATIONS
Optishade is a colorimeter, an optoelectronic
device, that allows to measure colors in
the dental color space. Optishade works
exclusively together with an iPhone or an iPad
(not supplied).
VERY IMPORTANT: your Optishade is an
advanced technology device that needs to
be manipulated with the greatest care. Any
issue resulting from a wrong or abusive use
of your Optishade is not covered by the
warranty (warranty: 1 year).
WARNING! A calibration card is located
inside thecalibration cap. The calibration
card is extremely fragile and sensible.
You should in no way touch it with your
fingers nor risk to stain it. The calibration
Cap cannot be disinfected nor sterilized. In
case you are unsure about its cleanliness
or in case of a risk of cross contamination,
please immediately discard it and take a
new one.
WARNING! Each component has only
one mounting position possible. It is
recommended to train a little bit for a good
understanding of mounting principles.
WARNING ! Never try to open the Optishade
base. This one is sealed and the fact of
opening it cancels the warranty of the
producer. Beware for not risking any
infiltration of liquid inside the base of your
Optishade.
VERY IMPORTANT! Any damage
caused by an infiltration of liquid inside
the base of your Optishade is not
covered by the producer’s warranty.
Contents
• Optishade unit complete with Capture
Guide Cone and Calibration Cap
• 1 lightning cable for connection
Optishade/iPhone-iPad - 1 USB
Charging Cable
• 4 Capture Guide Cones
• 4 Calibration Caps
• 1 Instruction for use booklet and 1 quick
start guide
• Optishade App (free) to be downloaded
on Appstore
• 30 days free licence Matisse
NOT STERILE. REFER TO CLEANING
AND DISINFECTING SECTION
Unit dimensions length 51 mm
diameter 81,5
mm
weight 60g
Functions with iOS iPhone, iPad
and iPod Touch
Comes with
the following
two cables:
- Lightning
- USB
Quick Start Guide
4. Calibrate, remove the cap and start measuring
3. Connect Optishade to an iOS device and follow app instructions
2. Download free Optishade app
1. Fully charge the unit
