Snapper 7063375 User manual

Parts Manual fo
r
Revision 1,
48" Z-VAC CZT/HZT TWIN BAG CATCHER
COPYRIGHT
©
2005
McDonough, GA, 30253 U.S.A.
TP 400-5060-1-AT-N
8/8/2005 Manual No. 7063375
SNAPPER PRODUCTS, INC.
ALL RIGHTS RESERVED.
MODEL
7063375

Table Of Content
s
TP 400-5060-1-AT-N
Manual No. 706337548" Z-VAC CZT/HZT TWIN BAG CATCHER
3
PAGE GROUP
4Z-Vac CZT/HZT Blower Unit Group
6Z-Vac CZT/HZT Blower Mount Group
8Z-Vac CZT/HZT Catcher Group
12 Z-Vac CZT/HZT Catcher Mount Group
14 Z-Vac CZT/HZT Weight Group
16 Z-Vac CZT/HZT Decal Group

Z-Vac CZT/HZT Blower Unit Group
TP 400-5060-1-AT-N
Manual No. 7063375 48" Z-VAC CZT/HZT TWIN BAG CATCHER
4

Z-Vac CZT/HZT Blower Unit Group
Footnotes:
TP 400-5060-1-AT-N
Manual No. 706337548" Z-VAC CZT/HZT TWIN BAG CATCHER
5
Part No Descri
p
tionItem Qt
y
Note
1 3046782 1 WELDMENT, Blower Belt Guard
2 7091121 1 NUT, 1/2-13 Hex Nyloc
3 7090183 1 WASHER, 1/2” Flat SAE
4 3021097 1 PULLEY, A Groove Idler, Steel
5 7044995 1 IDLER STUD (3/8-24 thread)
6 7091804 2 FLAT WASHER, 9/16 Type Narrow
7 7014409 2 FLANGE BEARING, 9/16” I.D. (powdered metal)
8 7010776 1 RETAINING RING, 1/2”
9 3046824 1 BELT RETAINER, Idler
10 7091527 1 SCREW, 5/16-18 x 1-1/4” Hex Head Cap, GR5
11 3047253 1 WELDMENT, Idler Arm
12 7091601 1 NUT, 5/16-18 Hex Flange Lock
13 7091218 1 SCREW, 1/2-13 x 2-1/2” Hex Head Cap, GR5
14 3046781 1 WELDMENT, Blower Housing
15 3046853 1 BACK PLATE, Blower
16 7091541 7 SCREW, 5/16-18 x 3/4” Hex Washer Self-Tap
17 3022832 2 BEARING, Pillow Block, Blower (includes grease fitting)
18 7090839 8 NUT, 7/16-14 Hex Center Lock, GR5 or B
19 3031920 4 SCREW, 7/16-14 x 1-1/2” Hex Head Cap, GR5
20 3046854 1 IMPELLER, Fast Vac Blower (weldment)
21 3031919 4 SCREW, 7/16-14 x 1-1/4” Hex Head Cap, GR5
22 7091619 2 NUT, 3/8-16 Hex Flange Lock Was 90613
23 3046813 2 BELT RETAINER
24 3043613 2 PULLEY, Flat Idler, 2-3/4” O.D.
25 7090122 9 WASHER, 3/8” Flat SAE
26 7091560 1 SCREW, 3/8-16 x 2-1/4” Hex Head Cap, GR5
27 7091518 1 NUT, 3/8-24 Hex Nyloc
28 7091305 1 SCREW, 3/8-16 x 2” Hex Head Cap, GR5
29 7092111 3 U-CLIP, 5/16-18
30 7091541 3 SCREW, 5/16-18 x 3/4” Hex Washer Self-Tap

Z-Vac CZT/HZT Blower Mount Group
TP 400-5060-1-AT-N
Manual No. 7063375 48" Z-VAC CZT/HZT TWIN BAG CATCHER
6

Z-Vac CZT/HZT Blower Mount Group
Footnotes:
TP 400-5060-1-AT-N
Manual No. 706337548" Z-VAC CZT/HZT TWIN BAG CATCHER
7
Part No Descri
p
tionItem Qt
y
Note
1 3036323 1 BELT, A Section, 91.125” effective length
2 3037161 1 WELDMENT, Belt Cover, Deck
3 ----- -- -- NOT USED
4 7091537 2 WING LOCKNUT 5/16-18
5 3037162 1 BELT GUARD
6 3046806 1 PULLEY, Blower Input
7 7078298 1 PULLEY, Spindle
8 3027505 1 WELDMENT, Blower Mount
9 3027507 1 WELDMENT, Guard Support Bracket
10 7091541 4 SCREW, 5/16-18 x 3/4” Hex Washer Self-Tap
11 3027508 1 WELDMENT, Deck Mount Bracket
12 7091304 2 SCREW, 3/8-16 x 1” Hex Head Cap, GR5
13 7091619 4 NUT, 3/8-16 Hex Flange Lock Was 90613
14 3032118 1 WELDMENT, T-Handle Pin
15 7091527 1 SCREW, 5/16-18 x 1-1/4” Hex Head Cap, GR5
16 7091601 1 NUT, 5/16-18 Hex Flange Lock
17 7090951 2 NUT, 5/16-18 Hex Large Flange Center Lock
18 3020807 1 SPRING, Idler, Fast Vac
19 7012315 1 KEY, 1/4 Square x 1.44
20 7091617 1 SCREW, 3/8-16 x 6” Hex Head Cap, GR5

Z-Vac CZT/HZT Catcher Group
TP 400-5060-1-AT-N
Manual No. 7063375 48" Z-VAC CZT/HZT TWIN BAG CATCHER
8

Z-Vac CZT/HZT Catcher Group
Footnotes:
TP 400-5060-1-AT-N
Manual No. 706337548" Z-VAC CZT/HZT TWIN BAG CATCHER
9
Part No Descri
p
tionItem Qt
y
Note
1 3046861 1 ASSEMBLY, 2 Bag Cover and Screen (includes Item No. 1a, 5, 12, 13,
14, 42, 43, 44, 45)
1a 1704033 1 CATCHER TOP, 2 Bag
2 1704180 2 WINDOW, Cover
3 1704405 1 DECAL, Safety, Grass Bag
4 1667248 6 CLIP, Canoe
5 1910531 4 WASHER, .188 Rivet
6 7090922 1 SCREW, #10-32 x 1-1/2 Hex Washer Head Machine w/Nylon
Patch
7 7091702 3 WASHER, .19 x .38 x .06 Flat
8 3021670 1 STRAP, Rubber
9 7090376 5 NUT, #10-32 Hex Nyloc
10 3022838 1 KNOB
11 2960367 2 PIN, Round Head
12 1703700 1 SCREEN
13 1704057 1 SEAL, Clip
14 7091578 4 POP RIVET, 3/16 x .265 Alum.
15 1675707 2 TUBE CLIP, Grass Bag
16 1703807 2 HANGER, Grass Bag
17 7090316 4 BOLT, 5/16-18 x 3/4” Square Neck Carriage, GR5
18 1703855 2 HOOP, Grass Bag
19 3000847 2 GRASS BAG
20 1672023 2 CLAMP, Grass Bag
21 7090187 4 WASHER, 5/16” Split Lock
22 7091511 4 NUT, 5/16-18 Hex, GR5 or B
23 3022875 1 HOSE CLAMP, Upper
24 3022833 1 HOSE, Snapper Fast Vac
25 3022876 1 HOSE CLAMP, Lower, Fast Vac
26 7091757 1 SCREW, #10-24 x 1-1/4” Hex Head Cap, GR5
27 7091290 1 NUT, #10-24 Hex Nyloc
28 7091503 2 HAIR PIN, 1.6 Was 15067
29 1703822 1 CROSS ASSEMBLY
30 7091530 5 BOLT, 1/4-20 x 3/4” Carriage
31 7091084 2 SCREW, 1/4-20 x 3/8” Hex Washer Self-Tap
32 1704507 1 STRAP, Tube Support
33 7091702 1 WASHER, .191 I.D. Flat
34 3046722 1 WELDMENT, Hose Adapter/Deflector
35 7091098 3 WASHER, 1/4” Flat Was 90598
36 7091603 5 NUT, 1/4-20 Hex Nyloc

Z-Vac CZT/HZT Catcher Group
TP 400-5060-1-AT-N
Manual No. 7063375 48" Z-VAC CZT/HZT TWIN BAG CATCHER
10

Z-Vac CZT/HZT Catcher Group
Footnotes:
TP 400-5060-1-AT-N
Manual No. 706337548" Z-VAC CZT/HZT TWIN BAG CATCHER
11
Part No Descri
p
tionItem Qt
y
Note
37 7090883 3 SCREW, 10F x 7/8” Pan Head Cross Recess
38 7091241 3 POP RIVET, 3/16”
39 1704075 1 SUPPORT, Tube
40 3046774 1 SEAL, 2 Bag Catcher
41 1704508 1 BRACKET, Seal
42 1960400 1 SCREW, #10-12 x 5/8 Hex Washer Self-Tap
43 7090052 1 WASHER, 1/4 Split Lock
44 1705876 1 CABLE, Double Loop
45 1933886 1 NUT, Speed

Z-Vac CZT/HZT Catcher Mount Group
TP 400-5060-1-AT-N
Manual No. 7063375 48" Z-VAC CZT/HZT TWIN BAG CATCHER
12

Z-Vac CZT/HZT Catcher Mount Group
Footnotes:
TP 400-5060-1-AT-N
Manual No. 706337548" Z-VAC CZT/HZT TWIN BAG CATCHER
13
Part No Descri
p
tionItem Qt
y
Note
1 3046687 1 WELDMENT, Bagger Mount Frame
2 7091086 4 SCREW, 3/8-16 x 3/4” Hex Head Cap, GR5
3 7091619 4 NUT, 3/8-16 Hex Flange Lock
4 3046831 1 ARM, Cover Latch
4a 3046829 1 REINFORCEMENT PLATE
5 7091318 2 SCREW, 5/16-18 x 3/4” Hex Head Cap, GR5
6 7091601 2 NUT, 5/16-18 Hex Flange Lock
7 3046995 1 WELDMENT, Bumper Mounting Plate
8 7050551 2 STANDOFF, Bumper Mount
9 7091318 4 SCREW, 5/16-18 x 3/4” Hex Head Cap
10 7091601 4 NUT, 5/16-18 Hex Flange Lock
11 3046693 1 ROD, Support
12 7091503 1 HAIRPIN, Clip Was 15067
-- 3039122 1 EXHAUST DEFLECTOR (Not Shown)
-- 3039123 1 MUFFLER CLAMP (Not Shown)

Z-Vac CZT/HZT Weight Group
TP 400-5060-1-AT-N
Manual No. 7063375 48" Z-VAC CZT/HZT TWIN BAG CATCHER
14

Z-Vac CZT/HZT Weight Group
Footnotes:
TP 400-5060-1-AT-N
Manual No. 706337548" Z-VAC CZT/HZT TWIN BAG CATCHER
15
Part No Descri
p
tionItem Qt
y
Note
1 7078288 5 WEIGHT, 27 x 5 x 1/4”
2 7078289 4 WEIGHT, 27 x 2-1/2 x 1/4”
3 7091821 2 BOLT, 1/2-13 x 3 Hex Head
4 7090254 2 WASHER, 1/2 Split Lock
5 7091316 2 NUT, 1/2-13 Hex

Z-Vac CZT/HZT Decal Group
TP 400-5060-1-AT-N
Manual No. 7063375 48" Z-VAC CZT/HZT TWIN BAG CATCHER
16

Z-Vac CZT/HZT Decal Group
Footnotes:
TP 400-5060-1-AT-N
Manual No. 706337548" Z-VAC CZT/HZT TWIN BAG CATCHER
17
Part No Descri
p
tionItem Qt
y
Note
1 3046944 1 DECAL, Fast-Vac
2 1704405 1 DECAL, Safety, Grass Bag
3 3046850 1 DECAL, Danger, Fast-Vac
4 3046851 1 DECAL, Warning, Fast-Vac
5 3046883 1 DECAL, Warning, Fast-Vac

Parts Manual fo
r
48" Z-VAC CZT/HZT TWIN BAG CATCHER
IT IS THE POLICY OF SNAPPER TO IMPROVE ITS PRODUCTS
WHENEVER IT IS POSSIBLE AND PRACTICAL TO DO SO. WE
RESERVE THE RIGHT TO MAKE CHANGES OR ADD IMPROVEMENTS
AT ANY TIME WITHOUT INCURRING ANY OBLIGATION TO MAKE
SUCH CHANGES ON PRODUCTS MANUFACTURED PREVIOUSLY.
Revision 1,
COPYRIGHT
©
2005
TP 400-5060-1-AT-N
8/8/2005 Manual No. 7063375
SNAPPER PRODUCTS, INC.
ALL RIGHTS RESERVED.
McDonough, GA, 30253 U.S.A.